journal article·2024-12

Enhancing stability of double perovskite electrode by vanadium doping for symmetrical solid oxide cell

Ao Wang, Gang Li, Cheng Li, Yujie Tang, Dong Yan, Jian Li, Lichao Jia

Publisher page

Abstract

Using solid oxide cells to produce and utilize hydrogen is an effective method for addressing energy demands. In this study, vanadium (V) was doped into the B site of the La 0.3Sr 1.7Fe 1.3Ni 0.2Mo 0.5O 6-δ double perovskite, which served as the electrode material for symmetrical solid oxide cells. Doping with high-valence V 4+/V 5+ reduced both the average Fe valence state and the concentration of oxygen vacancies, while simultaneously decreasing the reducing activity of the material and enhancing its stability. After operating at 750 °C and ± 400 mA cm −2 for 150 h, the degradation rates for Cell-LSFNM were 4.56 % and 8.32 %, respectively, while those for Cell-LSFVNM were only 0 % and 3.32 %, respectively. Although V doping slightly diminished the electrochemical performance of the single cell, it significantly improved long-term operational stability in solid oxide fuel/electrolysis cell (SOFC/SOEC) modes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Materials of solid oxide electrolysis cells for H2O and CO2 electrolysis: a review10.26599/JAC.2023.9220767 ↗
2. Synthesis and characterization of nanofiber-structured Ba0.5Sr0.5Co0.8Fe0.2O3−δ perovskite oxide used as a cathode material for low-temperature solid oxide fuel cells10.1016/j.mseb.2011.12.018 ↗
3. Entropy engineering design of high-performing lithiated oxide cathodes for proton-conducting solid oxide fuel cells10.26599/JAC.2023.9220804 ↗
4. Advances in component and operation optimization of solid oxide electrolysis cell
5. Visiting the roles of Sr-or Ca-doping on the oxygen reduction reaction activity and stability of a perovskite cathode for proton conducting solid oxide fuel cells10.1002/sus2.101 ↗
6. Perspective and control of cation interdiffusion and interface reactions in solid oxide fuel cells (SOFCs)
7. Environmental impact assessment of a newly developed solid oxide fuel cell-based system combined with propulsion engine using various fuel blends for cleaner operations10.1016/j.susmat.2022.e00554 ↗
8. Attempted preparation of La0.5Ba0.5MnO3−δ leading to an in-situ formation of manganate nanocomposites as a cathode for proton-conducting solid oxide fuel cells10.26599/JAC.2023.9220748 ↗
9. Novel high-entropy perovskite-type symmetrical electrode for efficient and durable carbon dioxide reduction reaction
10. Advances and challenges in symmetrical solid oxide electrolysis cells: materials development and resource utilization10.1039/D3QM00410D ↗
11. A review on recent advances and trends in symmetrical electrodes for solid oxide cells10.1016/j.jpowsour.2021.230852 ↗
12. Bismuth doped La0.75Sr0.25Cr0.5Mn0.5O3−δ perovskite as a novel redox-stable efficient anode for solid oxide fuel cells10.1039/D0TA03328F ↗
13. Switching on electrocatalytic activity in solid oxide cells10.1038/nature19090 ↗
14. Materials development for intermediate-temperature solid oxide electrochemical devices10.1007/s10853-011-6213-1 ↗
15. High-temperature CO2 electrolysis in solid oxide electrolysis cells: Developments10.1002/adma.201902033 ↗
16. Electronic transport in the novel SOFC anode material La1−xSrxCr0.5Mn0.5O3±δ10.1016/j.ssi.2006.02.025 ↗
17. Electrochemical performance of La0.3Sr0.7Ti0.3Fe0.7O3-δ/CeO2 composite cathode for CO2 reduction in solid oxide electrolysis cells
18. A vanadium-doped BSCF perovskite for CO2 electrolysis in solid oxide electrolysis cells10.1016/j.ijhydene.2021.03.134 ↗
19. An Active and Stable Hydrogen Electrode of Solid Oxide Cells with Exsolved Fe-Co-Ni Nanoparticles from Sr2FeCo0.2Ni0.2Mo0.6O6-δ Double-Perovskite
20. Multiphase engineering regulation of double perovskite and RP structure heterojunction interfaces for solid oxide fuel cells10.1016/j.susmat.2024.e00905 ↗
21. A review on the application of Sr2Fe1.5Mo0.5O6-based oxides in solid oxide electrochemical cells10.1016/j.seppur.2022.121581 ↗
22. Upcycling of nickel oxide from spent Ni-MH batteries as ultra-high capacity and stable Li-based energy storage devices
23. Self-sustainable protonic ceramic electrochemical cells using a triple conducting electrode for hydrogen and power production10.1038/s41467-020-15677-z ↗
24. Electron doping of Sr2FeMoO6−δ as high performance anode materials for solid oxide fuel cells10.1039/C8TA10061F ↗
25. H. Lv, L. Lin, X. Zhang, R. Li, Y. Song, H. Matsumoto, N. Ta, C. Zeng, Q. Fu, G. Wang, X. Bao, Promoting exsolution of RuFe alloy nanoparticles on Sr2Fe1.4Ru0.1Mo0.5O6-δ via repeated redox manipulations for CO2 electrolysis, Nat Commun 12 (2021) 5665, https://doi.org/10.1038/s41467-021-26001-8.10.1038/s41467-021-26001-8 ↗
26. Efficient bifunctional electrocatalysts for solid oxide cells based on the structural evolution of perovskites with abundant defects and exsolved CoFe nanoparticles10.1016/j.jpowsour.2020.228981 ↗
27. A real proton-conductive, robust, and cobalt-free cathode for proton-conducting solid oxide fuel cells with exceptional performance10.1002/sus2.156 ↗
28. Oxygen transport properties of nanostructured SrFe1−x MoxO2.5+3/2x (0 < x < 0.1) perovskites10.1007/s10008-010-1109-6 ↗
29. Introduction of UV-cured interpenetrating polymer network in PEO-based all-solid-state Li-S battery
30. Enhancing CO2 electrolysis performance with vanadium-doped perovskite cathode in solid oxide electrolysis cell10.1016/j.nanoen.2018.04.054 ↗
31. Realizing efficient activity and high conductivity of perovskite symmetrical electrode by vanadium doping for CO2 electrolysis10.1021/acsami.4c05465 ↗
32. In situ growth of Pt3Ni nanoparticles on an A-site deficient perovskite with enhanced activity for the oxygen reduction reaction10.1039/C7TA00349H ↗
33. A-site-deficiency facilitated in situ growth of bimetallic Ni-Fe nano-alloys: a novel coking-tolerant fuel cell anode catalyst10.1039/C5NR02518D ↗
34. Unveiling the key factor for the phase reconstruction and exsolved metallic particle distribution in perovskites10.1038/s41467-021-26739-1 ↗
35. Unraveling the enhanced kinetics of Sr2Fe1+xMo1-xO6-δ electrocatalysts for high-performance solid oxide cells10.1002/aenm.202102845 ↗
36. Sr2Fe1.4Mn0.1Mo0.5O6−δ perovskite cathode for highly efficient CO2 electrolysis10.1039/C9TA07689A ↗
37. Redox-reversible electrode material for direct hydrocarbon solid oxide fuel cells10.1021/acsami.0c00922 ↗
38. An all-oxide electrolysis cells for syngas production with tunable H2/CO yield via co-electrolysis of H2O and CO210.1016/j.jpowsour.2020.228887 ↗
39. High-performance anode material Sr2FeMo0.65Ni0.35O6-δ with in situ exsolved nanoparticle catalyst10.1021/acsnano.6b03979 ↗
40. Emerging anode materials architectured with NiCoFe ternary alloy nanoparticles for ethane-fueled protonic ceramic fuel cells10.1016/j.jpowsour.2021.230634 ↗
41. An efficient and durable perovskite electrocatalyst for oxygen reduction in solid oxide fuel cells10.1016/j.cej.2020.125237 ↗
42. An acidity-regulated double perovskite cathode for efficient and durable power generation of intermediate-temperature solid oxide fuel cells10.1039/D4TA02853H ↗
43. Enhanced electrocatalytic activity and CO2 tolerant Bi0.5Sr0.5Fe1-xTaxO3-δ as cobalt-free cathode for intermediate-temperature solid oxide fuel cells10.1016/j.ceramint.2019.06.295 ↗
44. Improved electrochemical performance by doping cathode materials Sr2Fe1.5Mo0.5−xTaxO6−δ (0.0 ≤ x ≤ 0.15) for Solid State Fuel Cell10.1016/j.jpowsour.2013.09.049 ↗
45. Effect of Co doping on the electrochemical properties of Sr2Fe1.5Mo0.5O6 electrode for solid oxide fuel cell10.1016/j.ijhydene.2013.01.121 ↗
46. C. Yao, J. Yang, S. Chen, J. Meng, K. Cai, Q. Zhang, Copper doped SrFe0.9-xCuxW0.1O3-δ (x=0–0.3) perovskites as cathode materials for IT-SOFCs, J. Alloys Compd. 868 (2021) 159127, https://doi.org/10.1016/j.jallcom.2021.159127.10.1016/j.jallcom.2021.159127 ↗
47. Unveiling the electrocatalytic activity of the GdBa0.5Sr0.5Co2−xCuxO5+δ (x ≥ 1) oxygen electrodes for solid oxide cells10.1021/acsami.3c08667 ↗
48. Exsolved Fe-Ni nano-particles from Sr2Fe1.3Ni0.2Mo0.5O6 perovskite oxide as a cathode for solid oxide steam electrolysis cells10.1039/C6TA06078A ↗
49. Bao, Atomic-scale insight into exsolution of CoFe alloy nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3-δ with efficient CO2 electrolysis10.1002/anie.202006536 ↗
50. A symmetrical solid oxide fuel cell demonstrating redox stable perovskite electrodes10.1039/b600532b ↗
51. A-site bismuth doping, a new strategy to improve the electrocatalytic performances of lanthanum chromate anodes for solid oxide fuel cells10.1016/j.apcatb.2020.118809 ↗
52. Zr doped BaFeO3-δ as a robust electrode for symmetrical solid oxide fuel cells10.1016/j.ijhydene.2019.10.091 ↗
53. A novel electrode material for symmetrical SOFCs10.1002/adma.201001044 ↗
54. Nb-doped Sr2Fe1.5Mo0.5O6-δ electrode with enhanced stability and electrochemical performance for symmetrical solid oxide fuel cells10.1016/j.ceramint.2019.03.130 ↗
55. A novel layered perovskite electrode for symmetrical solid oxide fuel cells: PrBa(Fe0.8Sc0.2)2O5+δ10.1016/j.jpowsour.2017.07.059 ↗
56. Performance of ferrite-based electrodes for steam electrolysis in symmetrical solid oxide cells10.1002/admi.202400001 ↗
57. Structural and electrochemical properties of B-site Ru-doped (La0.8Sr0.2)0.9Sc0.2Mn0.8O3-δ as symmetrical electrodes for reversible solid oxide cells10.1016/j.jallcom.2019.04.103 ↗
58. Layered perovskite (PrBa)0.95(Fe0.9Mo0.1)2O5+δ as electrode materials for high-performing symmetrical solid oxide electrolysis cells10.1016/j.matlet.2019.126758 ↗
59. High-performing electrolyte-supported symmetrical solid oxide electrolysis cells operating under steam electrolysis and co-electrolysis modes10.1016/j.ijhydene.2020.03.144 ↗
60. Perovskite Sr2Fe1.5Mo0.5O6−δ as electrode materials for symmetrical solid oxide electrolysis cells10.1016/j.ijhydene.2010.08.016 ↗
61. L. Fu, J. Zhou, J. Yang, Z. Lian, J. Wang, Y. Cheng, K. Wu, Exsolution of Cu nanoparticles in (LaSr)0.9Fe0.9Cu0.1O4 Ruddlesden-Popper oxide as symmetrical electrode for solid oxide cells, Appl. Surf. Sci. 511 (2020) 145525, https://doi.org/10.1016/j.apsusc.2020.145525.10.1016/j.apsusc.2020.145525 ↗