journal article·2024-02

Efficiency analysis of thermoelectric generators

J. Ider, F.Y. Assahi, A.F. Oliveira, R.M. Rubinger, C.P.L. Rubinger

Publisher page

Abstract

The negative environmental and economic impact, derived from the use of fossil fuels – oil, coal, gas, and other non-renewable sources of energy – has stimulated scientific research on clean and economically viable sources. Photovoltaics and wind power are intermittent sources which stimulates the quest for other energy sources. In this sense, a promising source of energy is made up of Thermoelectric Generators (TEGs), which have the property of converting thermal energy into electrical energy, through the well-known Seebeck Effect. A new methodology for the characterization of these devices is presented in this work. For a robust analysis of the measures, the extraction of parameters is done through the meta-heuristic Self-Adaptive differential evolution method. This is made possible by simultaneous fitting of three equations and five parameters in a consistent autonomous fashion. Besides a robust experimental setup which allows the generation and precise control of the temperature variable as electrical measurements, in a controlled environment, and a thorough statistical analysis is carried for eight TEGs, model SP-184827145 which gives the mean performance of the manufactured devices. The results obtained with low uncertainties indicates that this methodology is a reliable and low-cost option for the characterization of thermoelectric devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced Thermodynamic Systems and Engines · Refrigeration and Air Conditioning Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Experimental investigation on heat recovery from diesel engine exhaust using finned shell and tube heat exchanger and thermal storage system10.1016/j.apenergy.2010.07.023 ↗
2. Technologies to recover exhaust heat from internal combustion engines10.1016/j.rser.2012.05.018 ↗
3. Development and applications of solar-based thermoelectric technologies10.1016/j.rser.2005.06.008 ↗
4. Focus on low carbon technologies: The positive solution10.1016/j.rser.2007.04.015 ↗
5. A review of thermodynamics and heat transfer in solar refrigeration system10.1016/j.rser.2012.05.016 ↗
6. A review of solar thermal technologies✩10.1016/j.rser.2009.07.014 ↗
7. Renewable energy
8. Thermoelectrics, an environmentally-friendly source of electrical power10.1016/S0960-1481(98)00512-6 ↗
9. Thermal energy harvesting on the bodily surfaces of arms and legs through a wearable thermo-electric generator10.3390/s18061927 ↗
10. Recent development and application of thermoelectric generator and cooler10.1016/j.apenergy.2014.12.075 ↗
11. Thermoelectrics: a review of present and potential applications10.1016/S1359-4311(03)00012-7 ↗
12. Liquid metal based thermoelectric generation system for waste heat recovery10.1016/j.renene.2011.06.012 ↗
13. A review of energy sources and energy management system in electric vehicles10.1016/j.rser.2012.11.077 ↗
14. A review of solar thermal refrigeration and cooling methods10.1016/j.rser.2013.03.024 ↗
15. Energy harvesting thermoelectric generators manufactured using the complementary metal oxide semiconductor process10.3390/s130202359 ↗
16. Fabrication and characterization of CMOS-MEMS thermoelectric micro generators10.3390/s100201315 ↗
17. A comprehensive review of thermoelectric generators: Technologies and common applications10.1016/j.egyr.2019.12.011 ↗
18. Fabrication and testing of thermoelectric CMOS-MEMS microgenerators with CNCs film10.3390/app8071047 ↗
19. Multilayer thick-film thermoelectric microgenerator based on LTCC technology10.1108/MI-05-2016-0038 ↗
20. Thick-film photoimageable and laser-shaped arms for thermoelectric microgenerators10.1108/13565361111162620 ↗
21. Planar and three-dimensional thick-film thermoelectric microgenerators10.1016/j.microrel.2008.03.008 ↗
22. Sandwich-type three-dimensional thick-film thermoelectric microgenerators
23. Thermoelectric energy harvester fabricated in thick-film/LTCC technology10.1108/MI-11-2013-0077 ↗
24. Flexible thermoelectric power generator with Y-type structure using electrochemical deposition process10.1016/j.apenergy.2017.05.005 ↗
25. S. Hasebe, J. Ogawa, M. Shiozaki, T. Toriyama, S. Sugiyama, H. Ueno, K. Itoigawa, Polymer based smart flexible thermopile for power generation, in: 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest, IEEE.
26. Flexible thermoelectric generator using bulk legs and liquid metal interconnects for wearable electronics10.1016/j.apenergy.2017.05.181 ↗
27. Progress report on BSST-led US department of energy automotive waste heat recovery program10.1007/s11664-009-0991-0 ↗
28. An exhaust heat recovery system utilising thermoelectric generators and heat pipes10.1016/j.applthermaleng.2016.11.019 ↗
29. Performance enhancement of heat pipes assisted thermoelectric generator for automobile exhaust heat recovery10.1016/j.applthermaleng.2017.09.134 ↗
30. Modeling and fabricating a prototype of a thermoelectric generator system of heat energy recovery from hot exhaust gases and evaluating the effects of important system parameters10.1016/j.applthermaleng.2018.01.018 ↗
31. G.L. Solbrekken, K. Yazawa, A. Bar-Cohen, Thermal management of portable electronic equipment using thermoelectric energy conversion, in: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (IEEE Cat. No.04CH37543), IEEE.
32. Harvesting wasted heat in a microprocessor using thermoelectric generators: Modeling, analysis and measurement
33. Design and experimental investigation of a low-voltage thermoelectric energy harvesting system for wireless sensor nodes10.1016/j.enconman.2017.01.049 ↗
34. Thermoelectric generator experimental performance testing for wireless sensor network application in smart buildings10.1051/matecconf/201712008003 ↗
35. Power approaches for implantable medical devices10.3390/s151128889 ↗
36. Body-heat powered autonomous pulse oximeter
37. Human body heat for powering wearable devices: From thermal energy to application10.1016/j.enconman.2016.11.005 ↗
38. Experimental prototype and simulation optimization of micro-radial milliwatt-power radioisotope thermoelectric generator10.1016/j.applthermaleng.2017.07.022 ↗
39. Screen-printed radial structure micro radioisotope thermoelectric generator10.1016/j.apenergy.2018.05.073 ↗
40. A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges10.1016/j.rser.2017.01.177 ↗
41. Thermoelectric materials and heat exchangers for power generation – a review10.1016/j.rser.2018.07.003 ↗
42. Experimental and analytical simulation analyses on the electrical performance of thermoelectric generator modules for direct and concentrated quartz-halogen heat harvesting10.3390/en11123315 ↗
43. A robust system for thermoelectric device characterization10.1109/TIM.2021.3115213 ↗
44. Storn · J. Global Optim. · 1997 · 11 · 34110.1023/A:1008202821328 ↗
45. Parameter estimation of solar cells and modules using an improved adaptive differential evolution algorithm10.1016/j.apenergy.2013.06.004 ↗
46. The effects of noises on metaheuristic algorithms applied to the PV parameter extraction problem10.1016/j.solener.2020.02.093 ↗
47. Theoretical approach to predict the performance of thermoelectric generator modules10.1007/s11664-016-4948-9 ↗
48. Do we really need high thermoelectric figures of merit? A critical appraisal to the power conversion efficiency of thermoelectric materials10.1063/1.3634018 ↗
49. Bayendang · 2020
50. Figure of merit ZT of a thermoelectric device defined from materials properties10.1039/C7EE02007D ↗
51. Goldberg · 2006
52. Self-adapting control parameters in differential evolution: A comparative study on numerical benchmark problems10.1109/TEVC.2006.872133 ↗
53. Optimal sizing of PV/wind/diesel hybrid microgrid system using multi-objective self-adaptive differential evolution algorithm10.1016/j.renene.2018.01.058 ↗
54. Optimal PID plus fuzzy controller design for a PEM fuel cell air feed system using the self-adaptive differential evolution algorithm10.1016/j.ijhydene.2015.05.114 ↗
55. Comparison of dynamic differential evolution and self-adaptive dynamic differential evolution for buried metallic cylinder10.1080/09349847.2012.699607 ↗
56. Comparative performance evaluation of self-adaptive differential evolution with GA, SCE and DE algorithms for the automatic calibration of a computationally intensive distributed hydrological model10.2166/h2oj.2020.030 ↗
57. Recent advances in differential evolution – an updated survey10.1016/j.swevo.2016.01.004 ↗
58. Tawil · 2018
59. Relationship between thermoelectric figure of merit and energy conversion efficiency10.1073/pnas.1510231112 ↗