journal article·2023-07

Optimization of photoelectric properties and temporal stability of AZO/Ti/Cu/AZO films by insertion of Ti layer for low emissivity applications

Dong Zhang, Kewei Sun, Hongfeng Yin, Lulu Cheng, Hudie Yuan, Chunli Yang

Publisher page

Abstract

Low infrared (IR) emissivity of AZO/Ti/Cu/AZO films with four-layer structure were deposited on glass substrate. IR emissivity, optoelectronic properties and temporal stability of AZO/Ti/Cu/AZO film was investigated with increasing Ti layer thickness. The results suggest that the appropriate Ti layer thickness is beneficial to improvement of crystalline of the AZO top layer, which contributes to further enhancement of the optoelectronic and infrared properties of the films. The films with 10 nm-thickness Ti layer show lowest infrared emissivity of 0.045, high visible-transmittance of 87.3 %, lowest sheet resistance of 8.10 Ω/sq and figure-of-merit of 3.17 × 10 -2 Ω −1. Meanwhile, Ti layer can effectively avoid oxidation of Cu layer and improve the temporal stability of film. After prolonged exposure to air, IR emissivity of film is still at 0.050 and visible-transmittance is 87.0 %. The AZO/Ti/Cu/AZO films with low IR emissivity and excellent temporal stability have great potential for application in the field of low-emissivity films.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Low-emissivity materials for building applications: A state-of-the-art review and future research perspectives10.1016/j.enbuild.2015.03.024 ↗
2. Composite titanium oxide nanocolumnar thin films for low-emissivity coating10.1016/j.cap.2020.03.022 ↗
3. Characterisation and stability of low-emittance multiple coatings for glazing applications10.1016/S0927-0248(98)00202-5 ↗
4. Highly transparent conductive and near-infrared reflective ZnO: Al thin films10.1016/j.vacuum.2010.01.010 ↗
5. Achieving better greenhouse effect than glass: visibly transparent and low emissivity metal-polymer hybrid metamaterials, ES10.30919/esee8c325 ↗
6. Low emissivity Ag/Ta/glass multilayer thin films deposited by sputtering10.1063/1.3636107 ↗
7. Controllable synthesis of ZnO with different morphologies and their morphology-dependent infrared emissivity in high temperature conditions10.1016/j.jallcom.2019.07.011 ↗
8. Malats-Riera, Silver-based low-emissivity coatings for architectural windows: Optical and structural properties10.1016/S0927-0248(98)00007-5 ↗
9. Solar control coating on glass10.1016/S1359-0286(98)80049-1 ↗
10. Investigation of conductive and transparent Al-doped ZnO/Ag/Al-doped ZnO multilayer coatings by electron beam evaporation10.1016/j.tsf.2007.08.089 ↗
11. A leaf-like structured ITO conductive transparent thin film from visible to near-infrared region with enhanced stability10.1016/j.jeurceramsoc.2022.01.056 ↗
12. Highly transparent and conducting Al-doped ZnO as a promising material for optoelectronic applications, Pramana -
13. Simultaneous enhancement of electrical conductivity, uniformity, and near-infrared transmittance via laser annealing on ZnO: Ga films deposited by atmospheric pressure plasma jet10.1016/j.jallcom.2020.157697 ↗
14. Embedded Metal Oxide Plasmonics Using Local Plasma Oxidation of AZO for Planar Metasurfaces10.1002/adma.202001534 ↗
15. AZO (Al:ZnO) thin films with high figure of merit as stable indium free transparent conducting oxide10.1016/j.apsusc.2019.02.146 ↗
16. Application of indium tin oxide (ITO) thin film as a low emissivity film on Ni-based alloy at high temperature10.1016/j.infrared.2016.07.021 ↗
17. Solar heat gain coefficient and heat transmission coefficient of Al-doped ZnO thin-film coated low-emissivity glass10.2109/jcersj2.19217 ↗
18. Improving efficiency of organic light-emitting diodes fabricated utilizing AZO/Ag/AZO multilayer electrode10.1016/j.vacuum.2012.05.028 ↗
19. Improved stability of dielectric/metal/dielectric-structured transparent conductive films with the insertion of Ni layer under thermal oxidation environment10.1016/j.matlet.2020.128844 ↗
20. Diffusion-induced doping effects of Ga in ZnO/Ga/ZnO and AZO/Ga/AZO multilayer thin films10.1016/j.apsusc.2018.04.082 ↗
21. Effect of Cu layer thickness on the structural, optical and electrical properties of AZO/Cu/AZO tri-layer films10.1016/j.vacuum.2010.03.008 ↗
22. Utilization of AZO/Au/AZO multilayer electrodes instead of FTO for perovskite solar cells10.1016/j.solmat.2017.01.008 ↗
23. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
24. Al-doped ZnO/Ag/Al-doped ZnO multilayer films with a high figure of merit10.1016/j.ceramint.2015.08.001 ↗
25. Effects of oxygen ambient on the structural, morphological, optical and electrical properties of AZO/Ag/AZO transparent electrodes10.1007/s00339-021-04661-z ↗
26. AZO/Ag/AZO transparent conductive films: correlation between the structural, electrical, and optical properties and development of an optical model10.1364/OME.6.003217 ↗
27. AZO/Ag/AZO transparent flexible electrodes on mica substrates for high temperature application10.1016/j.ceramint.2017.08.089 ↗
28. Optimization of physical properties of sputtered silver films by change of deposition power for low emissivity applications10.1016/j.jallcom.2020.157073 ↗
29. Effects of nitrogen/oxygen on the electrical and optical properties and microstructure of triple layer AZO/Ag/AZO thin films10.1364/OME.379243 ↗
30. The effect of Cu/Mo bi-layer film on the structural, morphological and electro-optical characteristics of AZO/metal/AZO transparent conductive film10.1016/j.vacuum.2016.06.014 ↗
31. Improved performance of transparent-conducting AZO/Cu/AZO multilayer thin films by inserting a metal Ti layer for flexible electronics10.1364/OL.42.003020 ↗
32. Structural, optical and photocatalysis properties of sol–gel deposited Al-doped ZnO thin films10.1016/j.surfin.2019.05.007 ↗
33. Fabrication of highly conducting ZnO/Ag/ZnO and AZO/Ag/AZO transparent conducting oxide layers using RF magnetron sputtering at room temperature10.1016/j.mssp.2021.105801 ↗
34. Preparation of AZO/Cu/AZO films with low infrared emissivity, high conductivity and high transmittance by adjusting the AZO layer10.1016/j.apsusc.2021.152051 ↗
35. New figure of merit for transparent conductors10.1063/1.323240 ↗
36. Improved performance of transparent conductive Cu-based GZO multilayer thin films on flexible substrates via two Al2O3 layers and oxygen-containing atmosphere10.1016/j.jallcom.2021.159949 ↗
37. Optical and electrical performance of transparent conductive TiO2/Cu/TiO2 multilayers prepared by magnetron sputtering10.1007/s10854-017-8210-x ↗
38. Characterization of SnO2/Cu/SnO2 multilayers for high performance transparent conducting electrodes10.1016/j.tsf.2014.04.064 ↗
39. The transmittance modulation of ZnO/Cu/ZnO transparent conductive electrodes prepared on glass substrates10.3390/ma13183916 ↗
40. Roll-to-Roll sputtered ITO/Cu/ITO multilayer electrode for flexible, transparent thin film heaters and electrochromic applications