Ultrasensitive Poly(boric acid) Hydrogel-Coated Quartz Crystal Microbalance Sensor by Using UV Pressing-Assisted Polymerization for Saliva Glucose Monitoring

Quartz crystal microbalance (QCM) has attracted extensive attention in the field of biological analysis and detection because of its high sensitivity, fast response, real-time measurement, good operability, and low-cost production. However, to detect the trace amounts of small molecules, such as low-concentration saliva glucose under physiological conditions, is still a major challenge. Herein, the surface of a QCM chip was coated with a poly(boric acid)-based hydrogel using UV pressing-assisted polymerization to obtain a simple device for glucose detection. The designed QCM sensor shows a record-low detection limit of glucose (3 mg/L at pH 7.5), which is ∼30 times lower than that of sensors fabricated by conventional surface initiation-spin coating. The outperformance of the poly(boric acid) hydrogel-coated QCM sensor is probably due to the uniform and compact microstructure, as well as the presence of sufficient glucose-binding sites resulting from the hydrogel coating generated by UV pressing-assisted polymerization. This method provides an important solution to detect the trace amounts of small organic molecules or ions and has the potential to push forward the practical applications of QCM sensors.