journal article·2021-07Open access

Absorption enhancement in amorphous Si by introducing RF sputtered Ti intermediate layers for photovoltaic applications

H. Ferhati, F. Djeffal, N. Boubiche, A. Benhaya, J. Faerber, F. Le Normand, N. Javahiraly, T. Fix

Abstract

Abstract In this paper, embedded amorphous-silicon (a-Si) and titanium (Ti) ultrathin-films forming a multilayer structure is proposed as a new efficient absorber material for thin-film solar cells (TFSCs). Promising design strategy based on combining FDTD (finite difference time domain) with particle swarm optimization (PSO) was adopted to identify the a-Si/Ti multilayer structure offering the highest total absorbance efficiency (TAE). It is found that the proposed multilayer structure can serve as an effective absorber, yielding superb TAE exceeding 80%. The a-Si/Ti multilayer was then elaborated by successive growth of a-Si and Ti ultrathin layers using RF magnetron sputtering technique. The sputtered a-Si/Ti thin-film was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and UV–visible absorption spectroscopy. Measurements showed a unique optical behavior, promoting broadband absorbance over the visible and even NIR spectrum ranges. In particular, the prepared a-Si/Ti absorber exhibits an optical band-gap of 1.36 eV, which is suitable for photovoltaic applications. A performance assessment of the elaborated absorber was investigated by extracting I-V characteristics and electrical parameters under dark and 1-sun illumination. It is revealed that the proposed absorber demonstrates outstanding electrical and sensing performances. Therefore, promoting enhanced resistive behavior and light-scattering effects, this innovative concept of optimized a-Si/Ti multilayer provides a sound pathway for designing promising alternative absorbers for the future development of a-Si-based TFSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Co-sputtered Cu2ZnTi(S:Se)4 absorbers for thin film solar cells10.1016/j.renene.2019.07.086 ↗
2. A review of solar photovoltaic levelized cost of electricity10.1016/j.rser.2011.07.104 ↗
3. Effect of band alignment on the n-InAlN/p-Si heterojunction for solar cells: a numerical study
4. Photovoltaic solar cell technologies: analysing the state of the art10.1038/s41578-019-0097-0 ↗
5. Tracking solar cell conversion efficiency10.1038/s42254-020-0163-y ↗
6. Numerical investigation of a double-junction a: SiGe thin-film solar cell including the multi-trench region10.1088/1674-4926/36/6/064004 ↗
7. Flexible CIGS, CdTe and a-Si:H based thin film solar cells: a review10.1016/j.pmatsci.2019.100619 ↗
8. Device “Beyond 11% efficient sulfide kesterite Cu2ZnxCd1−xSnS4 solar cell: effects of cadmium alloying”10.1021/acsenergylett.7b00129 ↗
9. Solar cell efficiency tables (Version 55)10.1002/pip.3228 ↗
10. Optimizing the optical performance of ZnO/Si-based solar cell using metallic nanoparticles and interface texturization10.1016/j.ijleo.2017.09.127 ↗
11. Enhanced thermal stability of solar selective absorber based on nano-multilayered AlCrSiO films10.1016/j.solmat.2019.110331 ↗
12. Graded band-gap engineering for increased efficiency in CZTS solar cells10.1016/j.optmat.2018.01.006 ↗
13. The promise and challenge of nanostructured solar cells10.1038/nnano.2014.292 ↗
14. An efficient ITO-free transparent electrode based on diamond-like carbon with an engineered intermediate metallic thin-film10.1016/j.solener.2019.12.035 ↗
15. Development of silicon nanowires with optimized characteristics and fabrication of radial junction solar cells with <100 nm amorphous silicon absorber layer10.1016/j.mssp.2019.104778 ↗
16. Fabrication and characteristics of N-I-P structure amorphous silicon solar cells with CdS quantum dots on nanopillar array10.1016/j.physe.2019.01.017 ↗
17. Thin-film microcrystalline silicon solar cells: 11.9% efficiency and beyond10.7567/APEX.11.022301 ↗
18. The influence of Ar pressure on the structure and optical properties of nonhydrogenated a-Si thin films grown by rf magnetron sputtering onto room temperature glass substrates10.1016/j.jnoncrysol.2019.04.034 ↗
19. Review: progress in solar cells from hydrogenated amorphous silicon10.1016/j.rser.2016.11.190 ↗
20. A study of intrinsic amorphous silicon thin film deposited on flexible polymer substrates by magnetron sputtering10.1016/j.jnoncrysol.2016.07.019 ↗
21. Boosting ultrathin a-Si-H solar cells absorption through a nanoparticle cross-packed metasurface10.1016/j.solener.2020.03.075 ↗
22. Analysis of annealing and degradation effects on a-Si PV modules
23. Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells10.1038/ncomms15218 ↗
24. Direct and inverse Staebler-Wronski effects observed in carbon-doped hydrogenated amorphous silicon photo-detectors10.1016/j.nima.2010.12.201 ↗
25. The particle swarm – explosion, stability, and convergence in a multidimensional complex space
26. Exceeding 30% efficiency for an environment-friendly tandem solar cell based on earth-abundant Se/CZTS materials10.1016/j.physe.2019.01.002 ↗
27. A new high-performance phototransistor design based on both surface texturization and graded gate doping engineering10.1007/s10825-015-0752-7 ↗
28. An approach based on particle swarm computation to study the nanoscale DG MOSFET based circuits
29. Atlas User’s Manual, SILVACO TCAD, 2012.
30. Analytical modeling and simulation of CIGS solar cells10.1016/j.egypro.2013.07.071 ↗
31. Particle swarm optimization with particles having quantum behavior
32. Axial force identification of space grid structural members using particle swarm optimization method
33. An improved multi-swarm particle swarm optimizer for optimizing the electric field distribution of multichannel transcranial magnetic stimulation10.1016/j.artmed.2020.101790 ↗
34. Flexible hybrid graphene/a-Si: H multispectral photodetectors10.1039/C7NR02828H ↗
35. High performance molybdenum disulfide amorphous silicon heterojunction photodetector10.1038/srep02345 ↗
36. Poortmans · 2006 · 181
37. Optimized ITO/Ag/ITO multilayers as a current spreading layer to enhance the light output of ultraviolet light-emitting diodes10.1016/j.jallcom.2018.10.368 ↗
38. Role of ITO ultra-thin layer in improving electrical performance and thermal reliability of Au/ITO/Si/Au structure: an experimental investigation10.1016/j.spmi.2018.06.002 ↗
39. Optimized high-performance ITO/Ag/ITO multilayer transparent electrode deposited by RF magnetron sputtering10.1016/j.spmi.2019.03.027 ↗