Synthesis, electrical and dielectrical properties of (LixNa1–x)6Mg(SO4)4 vanthoffite ceramics as new attractive electrode materials for Li- and Na-ion batteries
Source abstract
Abstract
Abstract (LixNa1−x)6Mg(SO4)4 ceramics denoted as LNMSx (x = 0.1, 0.3, 0.5, 0.7 and 1 mol%) were obtained via the solid state reaction method. The refinement of the structural parameters using the Fullprof software by the Rietveld method confirmed that the Li+ dopant can replace the sodium in this structure with a slight increase in the lattice parameters. The spectroscopic studies revealed the vibrational mode of the sulfate groups. Electrical conductivity, activation energies, modulus and dielectric properties were studied by impedance spectroscopy in the [553–733 K] temperature range. Results show that the materials present a semiconductor ionic character with 1D conduction by means of migration of cation mobile in the system. Conductivity decreases when the Li+ dopant content x increases. The electrochemical studies show that LNMSx (x = 0.5) has the highest electrical conductivity that can be proposed as a good electrolyte material for lithium or sodium batteries applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. electrochemical energy storage in a sustainable modern society10.1039/C3EE42613K ↗
2. An interdisciplinary review of energy storage for communities: challenges and perspectives10.1016/j.rser.2017.05.003 ↗
3. A multifunctional 3.5V iron-based phosphate cathode for rechargeable batteries10.1038/nmat2007 ↗
4. Structure and stability of sodium intercalated phases in olivine FePO410.1021/cm101377h ↗
5. Sodium iron pyrophosphate: a novel 3.0V iron-based cathode for sodium-ion batteries10.1016/j.elecom.2012.08.028 ↗
6. New iron-based mixed-polyanion cathodes for lithium and sodium rechargeable batteries: combined first principles calculations and experimental study10.1021/ja3038646 ↗
7. Structural, transport, and electrochemical investigation of novel AMSO4F (A=Na, Li; M=Fe Co, Ni, Mn) metal fluorosulphates prepared using low temperature synthesis routes10.1021/ic100583f ↗
8. Synthesis, structural, and transport properties of novel bihydrated fluorosulphates NaMSO4F.2H2O (M=Fe Co, and Ni)10.1021/cm1010482 ↗
9. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
10. Lithium insertion into Fe2(SO4)3 frameworks10.1016/0378-7753(89)80153-3 ↗
11. Sulfate-based polyanionic compounds for Li-ion batteries: synthesis, crystal chemistry, and electrochemistry aspects10.1021/cm4022358 ↗
12. A 3.6 V lithium-based fluorosulphate insertion positive electrode for lithium-ion batteries10.1038/nmat2590 ↗
13. A 3.90 V iron-based fluorosulphate material for lithium-ion batteries crystallizing in the triplite structure10.1038/nmat3093 ↗
14. New lithium iron pyrophosphate as 3.5 V class cathode material for lithium ion battery10.1021/ja106297a ↗
15. High-voltage pyrophosphate cathodes10.1002/aenm.201100772 ↗
16. On the electroanalytical behavior of magnesium in a polar aprotic electrolyte solution10.1016/S0022-0728(99)00146-1 ↗
17. Studies using microelectrodes of the Mg(++)/Mg couple in tetrahydrofurane and propylene carbonate10.1016/0022-0728(86)87044-9 ↗
18. The magnesium and magnesium amalgam electrodes in aprotic organic solvents. A kinetic study10.1016/0013-4686(85)80104-3 ↗
19. The study of magnesium deposition and dissolution processes in ethereal Grignard salt solution using simultaneous EQCM-EIS and in situ FTIR spectroscopic measurements10.1149/1.1390949 ↗
20. Crystal structures and electrode performance of alpha-NaFeO2 for rechargeable sodium batteries10.5796/electrochemistry.80.716 ↗
21. Layered oxides as positive electrode materials for Na-Ion batteries10.1557/mrs.2014.85 ↗
22. P2-Type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries10.1038/nmat3309 ↗
23. Structure and stability of sodium intercalated phases in olivine NaFePO410.1021/cm101377h ↗
24. Progress in rechargeable magnesium battery technology10.1002/adma.200701495 ↗
25. Reversibility of electrochemical magnesium deposition from Grignard salt solutions
26. Nonaqueous electrochemistry of magnesium. Application to energy storage10.1149/1.2086553 ↗
27. Magnesium batteries: Current state of the art, issues and future perspectives10.3762/bjnano.5.143 ↗
28. High capacity rechargeable Magnesium-Ion batteries based on a microporous Molybdenum-Vanadium oxide cathode10.1021/acs.chemmater.6b01245 ↗
29. Cathode materials for magnesium and magnesium-ion based batteries10.1016/j.ccr.2014.11.005 ↗
30. A high energy-density tin anode for rechargeable magnesium-ion batteries10.1039/C2CC34673G ↗
31. Anodic performance of black phosphorus in magnesium-ion battery: the significance of Mg-P Bond-synergy10.1039/C6CC04236H ↗
32. Alkali-ion conduction paths in LiFeSO4F and NaFeSO4F tavorite-type cathode materials10.1021/cm200683n ↗
33. Jean-marie tarascon, preparation, structure, and electrochemistry of layered polyanionic hydroxysulfates: LiMSO4OH (M = Fe Co, Mn) electrodes for Li-Ion batteries10.1021/ja3125492 ↗
34. Marinite Li2M(SO4)2 (M = Co, Fe, Mn) and Li1Fe(SO4)2: model compounds for super-super-exchange magnetic interactions10.1021/ic401280e ↗
35. Design of new electrode materials for Li-ion and Na-ion batteries from the bloedite mineral Na2Mg(SO4)2.4H2O10.1039/C3TA13648E ↗
36. Pursuit of sustainable iron-based sodium battery cathodes: two case studies10.1021/acs.chemmater.5b03926 ↗
37. sodium intercalation mechanism of 3.8 V Class alluaudite sodium iron sulfate10.1021/acs.chemmater.6b01091 ↗
38. Off-Stoichiometry in alluaudite-type sodium iron sulfate Na2+2xFe2-x(SO4)3 as an advanced sodium battery cathode material10.1002/celc.201500036 ↗
39. An alluaudite Na2+2xFe2−x(SO4)3(x=0.2) derivative phase as insertion host for lithium battery10.1016/j.elecom.2014.11.009 ↗
40. Ionothermal synthesis of high-voltage Alluaudite Na2+2xFe2-x(SO4)3sodium insertion compound: structural, electronic, and magnetic insights10.1021/acsami.5b11302 ↗
41. First exploration of freestanding and flexible Na2+2xFe2−x(SO4)3@porous carbon nanofiber hybrid films with superior sodium intercalation for sodium ion batteries10.1039/C6CP04958C ↗
42. Synthesis, characterization and thermal analysis of K2M(SO4)2.6H2O (M = Mg Co, Cu)10.1007/s10973-015-4779-6 ↗
43. , Synthesis, characterization and thermal behavior of new rare earth ion-doped picromerite-type Tutton’s salts10.1007/s10973-016-6028-z ↗
44. Synthesis, characterization and spectroscopic properties of a new Nd3+-doped Co-picromerite-type Tutton salt10.1016/j.jlumin.2016.04.033 ↗
45. Synthesis, structural characterization and optical study of Dy3+ doped langbeinite salts10.1016/j.jlumin.2016.04.045 ↗
46. Blue up-conversion emission of Yb3+ -doped langbeinite salts10.1016/j.optmat.2016.01.052 ↗
47. Luminescence properties of Pr3+ ion doped Mg-picromeriteTutton salt10.1016/j.jlumin.2017.04.022 ↗
48. Synthesis, structural and electrochemical properties of new ytterbiumdoped langbeinite ceramics10.1016/j.ceramint.2017.05.132 ↗
49. Synthesis, characterization and electrical properties of both pure and cobalt-doped picromerite-type hydrated double salt K2Mg1-xCox(SO4)2·6H2O (x = 0, 0.4)10.1007/s11664-016-4622-2 ↗
50. Luminescence characterization of Dy and Eu doped Na6Mg(SO4)4 phosphors
51. Revised effective ionic radii and systematic studies of interatomic distances in halides and chaleogenides10.1107/S0567739476001551 ↗
52. Evaluation of n type ternary metal oxide NiMn2O4nanomaterialfor humidity sensing10.1016/j.snb.2013.10.071 ↗
53. Structural and lithium ion transport studies in sol−gel-prepared lithium silicophosphateglasses10.1021/cm980216o ↗
54. Structural characterization and oxide ionic conductivity of new silicate oxyapatite La9.13Bi0.2(SiO4)6O2
55. Application of the “universal power law” to the studies of ac conductivity of polymeric electrolytes10.1016/0167-2738(93)90276-9 ↗
56. Modelling the a.c.conductivity behaviour of composite polymeric electrolytes by the effective medium theory10.1016/0167-2738(96)00147-6 ↗
57. Structural aspects that enhance oxygen mobility in La9-2x/3Mn0.5RE0.5-x/3 (SiO4)6O2 with RE = Ca, Sr and Ba10.1016/j.jallcom.2014.03.140 ↗
58. Dimensionality dependence of the conductivity dispersion in ionic materials10.1103/PhysRevLett.83.983 ↗
59. Effect of cobalt substitution on the structure, electrical, and magnetic properties of nanorcrystalline Ni0.5Zn0.5Fe2O4 prepared by the polyolprocess10.1016/j.ceramint.2014.07.059 ↗
60. Dielectric relaxation, impedance spectra, piezoelectric properties of (Ba, Ca)(Ti, Sn)O3 ceramics and their multilayer piezoelectric actuators10.1016/j.jallcom.2017.02.237 ↗
61. Optical and dielectric properties of transparent ZrO2–TiO2–Li2B4O7 glass system10.1016/j.jallcom.2017.03.192 ↗
62. Dielectric relaxation and electrical properties of Sm0.5Bi4.5Ti3FeO15 ceramics10.1016/j.jallcom.2017.03.213 ↗
63. Electrical conductivity and dielectric properties of MgO doped lithium phosphate glasses10.1016/j.jnoncrysol.2017.03.042 ↗
64. Synthesis and characterization of EuBa2Ca2Cu3O9−x: the influence of temperature on dielectric properties and charge transport mechanism10.1016/j.mssp.2017.02.020 ↗