journal article·2020-10

The influence of vacuum pressure on the electrical properties of PbTiO3-δ ceramics

Khiat Abd elmadjid, Felicia Gheorghiu, Mokhtar Zerdali, Saad Hamzaoui

Publisher page

Abstract

Abstract PbTiO3-δ ceramics were successfully prepared by the traditional solid state reaction method using different vacuum pressures during calcinations step and then sintered at 1150 °C/2h. The present study was focused on the influence of vacuum pressure variation on the electrical properties of PbTiO3-δ ceramics. The room temperature XRD patterns indicate the crystallization of the perovskite structure for all the ceramics. The dielectric permittivity is increasing with decreasing of vacuum pressure due to the increasing of oxygen vacancies with reaching the high vacuum. Resistivity decreased with temperature increasing which proves the semiconductor character of present PbTiO3-δ ceramics. The electrical characterization indicates that PbTiO3-δ ceramics prepared using three different vacuum pressures during calcinations step are suitable for room temperature applications in microelectronics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Study on vacancy formation in ferroelectric PbTiO3 from ab initio
2. A study of structural phase transitions in antiferroelectric PbZrO3 by neutron diffraction10.1143/JPSJ.53.226 ↗
3. First-principles study of piezoelectricity in PbTiO310.1103/PhysRevLett.80.4321 ↗
4. Jaffe · 1971
5. Advantages and challenges of relaxor-PbTiO3 ferroelectric crystals for electroacoustic transducers- a review10.1016/j.pmatsci.2014.10.002 ↗
6. Application of lower temperature for crystallization of PbTiO3 nanopowders by the Sol-gel method
7. The upper limit of thermoelectric power factors in the metal–band-insulator crossover of the perovskite-type oxygen deficient system SrTiO3-δ/210.1088/0953-8984/23/4/045604 ↗
8. Graphene promoted oxygen vacancies in perovskite for enhanced thermoelectric properties10.1016/j.carbon.2016.11.012 ↗
9. Effect of vacuum calcination and subsequent oxidation on the superconducting properties of YBa2Cu3Ox10.1016/0167-2738(90)90124-A ↗
10. Synthesis of superconductive oxides by vacuum method10.1143/JJAP.27.L1003 ↗
11. The phase formation of lead titanate powders prepared by solid-state reaction10.1016/j.cap.2003.11.005 ↗
12. Preparation of nanocrystalline PbTiO3 by sol-gel process10.1016/S0254-0584(01)00558-2 ↗
13. Molten salt prepared lead titanate: powder characterization, sintering and physical properties10.1016/S0955-2219(99)00017-5 ↗
14. Low temperature synthesis of lead titanate by a hydrothermal method10.1557/JMR.1997.0025 ↗
15. Preparation, structural and functional properties of PbTiO3-δ ceramics10.1016/j.ceramint.2019.01.240 ↗
16. Scherrer · Göttinger Nachrichten Gesell. · 1918 · 2 · 98
17. The scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
18. Fabrication and electrical investigations of Pb-doped BaTiO3 ceramics10.1016/j.matchemphys.2017.01.088 ↗
19. Oxygen-vacancy-related relaxation and conduction behavior in (Pb1-xBax)(Zr0.95Ti0.05)O3 ceramics10.1063/1.4900610 ↗
20. Oxygen-vacancy-related low-frequency dielectric relaxation and electrical conduction in Bi:SrTiO310.1103/PhysRevB.62.228 ↗
21. The role of doping on the structural and functional properties of BiFe1−xMnxO3 magnetoelectric ceramics10.1016/j.jallcom.2010.05.135 ↗
22. Dielectric relaxation related to single-ionized oxygen vacancies in (Pb1-xLax)(Zr0.90Ti0.10)1–x/4O3 ceramics10.1016/j.materresbull.2010.04.026 ↗