journal article·2024-03Open access

Sustainability aggrandized performance of [Sm-Eu-Tm]:CsPbI1.8Br1.2 perovskite material in fully ambient solar cells, supercapacitors, and electro-catalysis

Shaan Bibi Jaffri, Khuram Shahzad Ahmad, Isaac Abrahams, Mohamed A. Habila

Abstract

Present investigation reports the first investigation on cesium lead halide (CsPbI1.8Br1.2) semiconductor doped with lanthanides forming a [Sm-Eu-Tm]:CsPbI1.8Br1.2 system. This material was analyzed for time dependent response at the ambient conditions expressing stability reflected by minimal alterations in band energy spanning over 1.78–2.07 eV for an extended duration. With the 47.68 nm average crystallite size, the developed material expressed maximum contact when deposited in the form of thin films. [Sm-Eu-Tm]:CsPbI1.8Br1.2 used as an active photo-harvester in perovskite solar cells (PSCs) excelled in acquisition of 12.81 % efficiency. Fhe fabricated electrode accomplished specific capacitance of 429.3 F g−1. Impedance analysis indicated the excellent ionic diffusion with minimal resistance, which improved the electrical energy storage. Finally, the water splitting experiments were suggestive of the developed material as an effective H2 electro-catalyst with lower ηHER i.e. 146 mV and Tafel slope i.e. 120.4 mV dec−1 when equated with the O2 evolution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Interfacial engineering revolutionizers: perovskite nanocrystals and quantum dots accentuated performance enhancement in perovskite solar cells10.1080/10408436.2020.1758627 ↗
2. Device Performance of Emerging Photovoltaic Materials (Version 3)10.1002/aenm.202203313 ↗
3. A 0D/3D Heterostructured all-inorganic halide perovskite solar cell with high performance and enhanced phase stability10.1002/adma.201904735 ↗
4. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant?10.1002/ange.201910800 ↗
5. Chemical composition and phase evolution in DMAI-derived inorganic perovskite solar cells10.1021/acsenergylett.9b02272 ↗
6. Structurally reconstructed CsPbI2Br perovskite for highly stable and square-centimeter all-inorganic perovskite solar cells10.1002/aenm.201803572 ↗
7. Simultaneous improved performance and thermal stability of planar metal ion incorporated CsPbI2Br all-inorganic perovskite solar cells based on MgZnO nanocrystalline electron transporting layer10.1002/aenm.201902708 ↗
8. Coordination modulated passivation for stable organic-inorganic perovskite solar cells10.1016/j.cej.2022.138740 ↗
9. Luminescence nanothermometry using a trivalent lanthanide co-doped perovskite10.1039/D2RA05935E ↗
10. Lanthanide doping in metal halide perovskite nanocrystals: spectral shifting, quantum cutting and optoelectronic applications10.1038/s41427-019-0192-0 ↗
11. Synthesis and photoluminescence characterization of the complexes of samarium dibenzoylmethanates with 1, 10-phenanthroline derivatives10.1016/j.poly.2022.115730 ↗
12. Applicability of reddish-orange light emitting samarium (III) complexes for biomedical and multifunctional optoelectronic devices10.1007/s10895-021-02887-x ↗
13. Structure, photoluminescence, and electrical transport properties of pure and Eu2O3 activated Zn2SnO4 host matrix10.1016/j.solidstatesciences.2021.106744 ↗
14. Effect of mixed rare-earth ions on the structural and optical properties of some borate glasses10.1016/j.ceramint.2019.06.046 ↗
15. Heavy rare-earth-doped ZBLAN glasses for UV–blue up-conversion and white light generation10.1016/j.jlumin.2013.05.024 ↗
16. J. Navas, A. Sánchez-Coronilla, T. Aguilar, M. Desireé, N.C. Hernández, R. Alcántara, J. Martín-Calleja, Thermo-selective Tm x Ti 1− x O 2− x/2 nanoparticles: from Tm-doped anatase TiO 2 to a rutile/pyrochlore Tm 2 Ti 2 O 7 mixture. An experimental and theoretical study with a photocatalytic application. Nanoscale. 6 (21) (2014) 12740-12757. https://doi.org/10.1039/C4NR03715D.10.1039/C4NR03715D ↗
17. Study on electric modulus, complex modulus and conductivity properties of Nb/Sm, Gd doped barium titanate-lithium ferrite ceramic composites
18. Evidence of structural damage in Sm and Gd co-doped Mn–Zn ferrite ceramics due to high-energy gamma irradiation10.1016/j.ceramint.2016.07.072 ↗
19. New nanosized (Gd3+, Sm3+) co-doped zinc ferrite: Structural, magnetic and first-principles study10.1016/j.physb.2021.413262 ↗
20. Cesium lead inorganic solar cell with efficiency beyond 18% via reduced charge recombination10.1002/adma.201905143 ↗
21. Tetraoctylammonium bromide-passivated CsPbI3− xBrx perovskite nanoparticles with improved stability for efficient red light-emitting diodes10.1016/j.jallcom.2021.163182 ↗
22. Fabrication of symmetric supercapacitor using cesium lead iodide (CsPbI3) microwire10.1016/j.matlet.2018.05.101 ↗
23. Cesium lead halide inorganic-based perovskite-sensitized solar cell for photo-supercapacitor application under high humidity condition10.1021/acsaem.7b00103 ↗
24. All-inorganic CsPbBr 3 perovskite as potential electrode material for symmetric supercapacitor10.1016/j.solidstatesciences.2021.106769 ↗
25. CsPbBr 3 nanocrystals glass facilitated with Zn ions for photocatalytic hydrogen production via H2O splitting
26. Enhanced solar-driven gaseous CO2 conversion by CsPbBr 3 nanocrystal/Pd nanosheet Schottky-junction photocatalyst10.1021/acsaem.8b01133 ↗
27. Role of perovskites as a bi-functional catalyst for electrochemical water splitting: A review10.1002/er.5635 ↗
28. Treasure trove for efficient hydrogen evolution through water splitting using diverse perovskite photocatalysts
29. Sustainable hydrothermal synthesis of cobalt-nickel nanomaterial for supercapacitor using green stabilizing agents10.1002/er.7452 ↗
30. Bio-inspired NiO/ZrO2 mixed oxides (NZMO) for oxygen evolution reactions: from facile synthesis to electrochemical analysis10.1002/jctb.7246 ↗
31. Efficient and stable graded CsPbI3− xBrx perovskite solar cells and submodules by orthogonal processable spray coating10.1016/j.joule.2020.12.010 ↗
32. H. Bian, D. Bai, Z. Jin, K. Wang, L. Liang, H. Wang, S.F. Liu, Graded bandgap CsPbI2+ xBr1− x perovskite solar cells with a stabilized efficiency of 14.4%, Joule, 2(8) (2018) 1500-1510. https://doi.org/10.1016/j.joule.2018.04.012.10.1016/j.joule.2018.04.012 ↗
33. Doping lanthanide into perovskite nanocrystals: highly improved and expanded optical properties10.1021/acs.nanolett.7b04575 ↗
34. Lanthanide-doping enables kinetically controlled growth of deep-blue two-monolayer halide perovskite nanoplatelets10.1039/D1NR02508B ↗
35. Scalable ambient fabrication of high-performance CsPbI2Br solar cells10.1016/j.joule.2019.07.015 ↗
36. Lanthanide-doped inorganic halide perovskites (CsPbX3): novel properties and emerging applications10.1039/D1TC05506B ↗
37. Strontium-doped low-temperature-processed CsPbI2Br perovskite solar cells10.1021/acsenergylett.7b00751 ↗
38. Structural, morphology and optical properties of NaYF 4 thin films doped with trivalent lanthanide ions10.1007/s10854-019-00780-9 ↗
39. Probing the photovoltage and photocurrent in perovskite solar cells with nanoscale resolution10.1002/adfm.201504451 ↗
40. Impact of host composition, codoping, or tridoping on quantum-cutting emission of ytterbium in halide perovskite quantum dots and solar cell applications10.1021/acs.nanolett.9b02139 ↗
41. Organic template-assisted green synthesis of CoMoO4 nanomaterials for the investigation of energy storage properties10.1039/C9RA09477F ↗
42. Binder-free cupric-ion containing zinc sulfide nanoplates-like structure for flexible energy storage devices10.1016/j.chemosphere.2022.137660 ↗
43. Recent advances in perovskite oxides for anion-intercalation supercapacitor: a review10.1016/j.mssp.2019.01.033 ↗
44. Nanostructured porous MnO2 on Ni foam substrate with a high mass loading via a CV electrodeposition route for supercapacitor application10.1016/j.electacta.2014.05.074 ↗
45. Nanostructured CuO/reduced graphene oxide composite for hybrid supercapacitors10.1039/c4ra02107j ↗
46. Simultaneous stirring and microwave assisted synthesis of nanoflakes MnO2/rGO composite electrode material for symmetric supercapacitor with enhanced electrochemical performance10.1016/j.diamond.2020.108129 ↗
47. Improved electrochemical performance of rGO/TiO2 nanosheet composite based electrode for supercapacitor applications10.1007/s10854-018-9393-5 ↗
48. Supercapacitor behavior and characterization of RGO anchored V2O5 nanorods
49. One-pot synthesis of reduced graphene oxide nanosheets anchored ZnO nanoparticles via microwave approach for electrochemical performance as supercapacitor electrode10.1007/s10854-020-04108-w ↗
50. Symmetric redox supercapacitor based on micro-fabrication with three-dimensional polypyrrole electrodes10.1016/j.jpowsour.2010.05.012 ↗
51. Plasmonic hot electrons: Potential candidates for improved photocatalytic hydrogen production, J. Int. Hydrogen
52. Semiconductor based nanomaterials for harvesting green hydrogen energy under solar light irradiation10.1080/03067319.2019.1700970 ↗
53. Synergistic effects of multifunctional lanthanides doped CsPbBrCl2 quantum dots for efficient and stable MAPbI3 perovskite solar cells10.1002/adfm.202110346 ↗
54. Lanthanide-doped luminescent perovskites: A review of synthesis, properties, and applications10.1016/j.jlumin.2022.119406 ↗