journal article·2023-01

Study of ferroelectric and piezoelectric response of heat-treated surfactant-based BaTiO3 nanopowder for high energy capacitors

Gulraiz Tanvir, Mohsin Saleem, Hamid Jabbar, Amir Hamza, Muhammad Asif Hussain, Muhammad Zubair Khan, Abrar H Baluch, Muhammad Irfan, Muhammad Shoaib Butt, Faysal Naeem, Abdul Ghaffar, Muhammad Ahsan, Muhammad Asif Rafiq, Rizwan Ahmed Malik, Adnan Maqbool

Publisher page

Abstract

Barium titanate (BaTiO 3) nanopowder was synthesized by the alkoxide-hydroxide sol–gel process in an inert (N 2 ) atmosphere. The effect of surfactant sodium dodecyl sulfate (SDS) concentration on the dispersion of BaTiO 3 powder was studied at different sintering temperatures, under microwave heating. The phase and structural analysis revealed that the addition of surfactant did not affect the phase transformation of barium titanate. The best outcome was obtained in the case of 0.5 % surfactant-based BaTiO 3. At 1100 °C sintering temperature, 0.5 % surfactant-based BaTiO 3 exhibited a maximum density of 97.7 %, dielectric constant of 9488, the leading parameters of breakdown strength as 3.12 kV/cm, the figure of merit as 9.98 × 10 3, and the piezoelectric constant (d 33) as 153 pC/N. Moreover, the energy density of 86 kJ/m 3 with an energy efficiency of 27.43 % was attained at 1100 °C. For pure BaTiO 3 nanopowder, the energy density and the energy efficiency were found as 66.85 kJ/m 3 and 50.42 % at 1250 °C, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (99)

Show source-provided references
1. Crystal growth and electrical properties of lead indium niobate–lead titanate binary single crystal10.1016/S0022-0248(01)01161-7 ↗
2. Dielectric response on microwave sintered BaTiO3 composite with Ni nanopowder and paste10.1016/j.materresbull.2015.01.024 ↗
3. Thermoelectric properties of niobium doped hexagonal barium titanate10.1016/S0167-577X(00)00229-9 ↗
4. Percolation phenomena of dielectric permittivity of a microwave-sintered BaTiO3–Ag nanocomposite for high energy capacitor10.1016/j.jallcom.2019.153525 ↗
5. LiTaO3 assisted giant strain and thermally stable energy storage response for renewable energy storage applications10.1016/j.ceramint.2021.02.142 ↗
6. Na0.5Bi0.5TiO3–BaZrO3 textured ceramics prepared by reactive templated grain growth method10.1016/j.ceramint.2015.03.188 ↗
7. A facile and cost-effective approach for the fabrication Bi0.5Na0.5TiO3 thick films on flexible substrate for energy storage capacitor applications10.1016/j.ceramint.2020.06.298 ↗
8. Stability of co-fired CuAg/(Bi0.37Na0. 37Sr0.26)TiO3 multilayer piezoelectric device10.1016/j.jallcom.2019.152341 ↗
9. The positive temperature coefficient of resistivity in barium titanate10.1007/BF00362121 ↗
10. Barium titanate ceramics with high piezoelectricity fabricated from fibrous particles10.1111/j.1151-2916.1985.tb15310.x ↗
11. BaTiO3-based piezoelectrics: fundamentals, current status, and perspectives10.1063/1.4990046 ↗
12. Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems10.1088/0964-1726/17/4/043001 ↗
13. Hybrid lead-free polymer-based nanocomposites with improved piezoelectric response for biomedical energy-harvesting applications: a review10.1016/j.nanoen.2019.04.090 ↗
14. Influence of BaTiO3 nanoparticles on dielectric, thermophysical and mechanical properties of ethylene-vinyl acetate elastomer/BaTiO3 microcomposites10.1109/TDEI.2011.5739440 ↗
15. Impact of surfactants on physical properties of BaTiO3 nanoparticles10.1142/S0219581X13500038 ↗
16. Piezoelectric microgenerators-current status and challenges10.1109/TUFFC.2009.1220 ↗
17. C. Baur, D.J. Apo, D. Maurya, S. Priya, W. Voit, Advances in piezoelectric polymer composites for vibrational energy harvesting, in: Polymer Composites for Energy Harvesting, Conversion, and Storage, ACS Publisher, 2014, pp. 1–27.10.1021/bk-2014-1161.ch001 ↗
18. Moulson · 2003
19. Influence of the microstructure evolution on electrical properties of multilayer capacitor with Ni electrode10.1143/JJAP.37.5227 ↗
20. Influence of the synthesis method on the preparation of barium titanate nanoparticles10.1016/j.cep.2015.09.011 ↗
21. Size-dependent ferroelectric behaviors of BaTiO3 nanowires
22. Grain-size effects on the ferroelectric behavior of dense nanocrystalline BaTiO3 ceramics10.1103/PhysRevB.70.024107 ↗
23. Size and temperature induced phase transition behaviors of barium titanate nanoparticles10.1063/1.2179971 ↗
24. Dependence of the crystal structure on particle size in barium titanate10.1111/j.1151-2916.1989.tb07706.x ↗
25. Engineering grain size and electrical properties of donor-doped barium titanate ceramics10.1016/j.ceramint.2010.08.040 ↗
26. Sodium excess Ta-modified (K0.5Na0.5)NbO3 ceramics prepared by reactive template grain growth method10.1111/ijac.12150 ↗
27. Hydrothermal preparation of barium titanate from barium-titanium acetate gel precursors10.1016/0955-2219(91)90116-H ↗
28. Synthesis of monodisperse nanoparticles of barium titanate: toward a generalized strategy of oxide nanoparticle synthesis10.1021/ja011414a ↗
29. Preparation of metal nanoparticles in water-in-oil (w/o) microemulsions10.1016/j.cis.2004.02.003 ↗
30. Dispersion behavior of barium titanate nanoparticles prepared by using various polycarboxylic dispersants
31. Preparation and properties of BaTiO3 ceramics from the fine ceramic powder10.1016/j.ceramint.2015.03.260 ↗
32. Improvement of barium titanate properties induced by attrition milling10.1016/j.ceramint.2012.03.041 ↗
33. Mistler · 2000
34. Interfacial modification of polystyrene-block-polybutadiene-block-polystyrene/magnesium hydroxide composites10.1002/mame.200390035 ↗
35. The effect of electrostatic repulsive forces on the stability of BaTiO3 particles suspended in non-aqueous media10.1016/S0927-7757(97)00234-3 ↗
36. High dielectric constant and energy density induced by the tunable TiO2 interfacial buffer layer in PVDF nanocomposite contained with core–shell structured TiO2@BaTiO3 nanoparticles10.1016/j.apsusc.2018.02.112 ↗
37. K. Gomi, Y. Lida, K. Tanaka, T. Yoshiyasu. T. Kakiuchi, Preparation of Highly Dispersed BaTiO3 Nanoparticles by Surfactant with High Density of Hydrophilic Group, Asian Pacific Confederation of Chemical Engineering congress program and abstracts, The Society of Chemical Engineers, Japan, 2004.
38. Preparation of highly dispersed ultrafine barium titanate powder by using microbial-derived surfactant10.1111/j.1151-2916.2003.tb03601.x ↗
39. Dispersion and rheology of BaTiO3 nanoparticles in ethanol–isopropanol solvents
40. Formation and processing of mesoporous barium titanate powders via the micelle template method10.1557/jmr.2006.0131 ↗
41. Preparation and characterization of BaTiO3 powders and ceramics by sol–gel process using oleic acid as surfactant10.1016/j.msea.2007.03.051 ↗
42. Preparation and characterization of BaTiO3 powders and ceramics by the sol–gel process using organic monoacid as surfactant10.1016/j.scriptamat.2007.06.013 ↗
43. Preparation and characterization of BaTiO3 powders and ceramics by sol–gel process using decanedioic acid10.1016/j.jallcom.2007.07.039 ↗
44. Preparation and characterization of BaTiO3 powders and ceramics by sol–gel process using hexanoic and hexanedioic acid as surfactant10.1016/j.mee.2008.11.003 ↗
45. Formation mechanisms of tetragonal barium titanate nanoparticles in alkoxide-hydroxide sol-precipitation synthesis10.1111/j.1551-2916.2006.01056.x ↗
46. Laser ablation method: use of surfactants to form the dispersed Ag nanoparticles10.1016/S0927-7757(01)00854-8 ↗
47. Synthesis and surface modification of submicron BaTiO3 powders via a facile surfactant-assisted method10.1016/j.ceramint.2020.05.200 ↗
48. Phase content, tetragonality, and crystallite size of nanoscaled barium titanate synthesized by the catecholate process: effect of calcination temperature10.1016/S0955-2219(02)00071-7 ↗
49. Effects of BiMO3 on dielectric, ferroelectric, and piezoelectric properties of perovskite lead-free piezoelectric BaTiO3–(Bi0.5Na0.5) TiO3 ceramics10.1111/ijac.12688 ↗
50. Evolution of phase structure and giant strain at low driving fields in Bi-based lead-free incipient piezoelectrics10.1016/j.mseb.2015.05.009 ↗
51. Dielectric and ferroelectric properties of BaTiO3 nanofibers prepared via electrospinning10.1016/j.jmst.2014.03.021 ↗
52. BaTiO3 supercages: unusual oriented nanoparticle aggregation and continuous ordering transition in morphology10.1021/nn505667x ↗
53. Additive-assisted aqueous synthesis of BaTiO3 nanopowders10.1021/cg100596q ↗
54. Enhanced electric field-induced strain and ferroelectric behavior of (Bi0.5Na0.5)TiO3–BaTiO3–SrZrO3 lead-free ceramics10.1016/j.ceramint.2014.04.026 ↗
55. Ferroelectric transition in an epitaxial barium titanate thin film: Raman spectroscopy and x-ray diffraction study10.1063/1.1596720 ↗
56. Ferroelectric properties and microwave sintering of BaTiO3 synthesized by using the alkoxide-hydroxide sol-gel process10.3938/jkps.65.92 ↗
57. Facile synthesis of BaTiO3 nanotubes and their microwave absorption properties10.1021/am300069x ↗
58. Surfactant-free hydrothermal synthesis of highly tetragonal barium titanate nanowires: a structural investigation10.1021/jp0600110 ↗
59. Synthesis, sintering and dielectric properties of a BaTiO3–Ni composite10.1016/j.ceramint.2013.12.075 ↗
60. Facile synthesis of submicron BaTiO3 crystallites by a liquid–solid reaction method10.1016/j.jcrysgro.2006.02.012 ↗
61. Crystal structure and the paraelectric-to-ferroelectric phase transition of nanoscale BaTiO310.1021/ja0758436 ↗
62. Barium titanate nanocrystals and nanocrystal thin films: synthesis, ferroelectricity, and dielectric properties10.1063/1.2218765 ↗
63. Raman scattering studies on nanocrystalline BaTiO3 Part I—isolated particles and aggregates10.1002/jrs.1764 ↗
64. Effect of microwave frequency on hydrothermal synthesis of nanocrystalline tetragonal barium titanate10.1021/jp7112818 ↗
65. Temperature-dependent Raman spectroscopy of BaTiO3 nanorods synthesized by using a template-assisted sol–gel procedure10.1002/jrs.4206 ↗
66. Evolution of ferroelectric and piezoelectric response by heat treatment in pseudocubic BiFeO3–BaTiO3 ceramics10.1007/s10832-018-0172-8 ↗
67. Effect of sintering temperature on electrical and dielectric properties of Ni based BaTiO3 composite10.1166/jno.2015.1755 ↗
68. Sintering behaviors and dielectric properties of nanocrystalline barium titanate10.1016/j.mseb.2007.01.002 ↗
69. Influence of interface anisotropy on grain growth and coarsening10.1146/annurev.matsci.33.041002.094657 ↗
70. Lead-free barium titanate ceramics with large piezoelectric constant fabricated by microwave sintering10.1143/JJAP.45.L30 ↗
71. Sintering of nanocrystalline BaTiO310.1016/j.ceramint.2003.12.141 ↗
72. Observation of high permittivity in Ho substituted BaZr0.1Ti0.9O3 ceramics
73. D. Sandi, A. Supriyanto, A. Jamaluddin, Y. Iriani, The effects of sintering temperature on dielectric constant of Barium Titanate (BaTiO3), IOP Conf. Ser.: Mater. Sci. Eng., IOP Publishing, 2016, pp. 012069.10.1088/1757-899X/107/1/012069 ↗
74. Mechanical and dielectric behaviors of perovskite (Ba, Sr)TiO3 borosilicate glass ceramics10.1007/s40145-014-0104-2 ↗
75. Facile preparation of uniform barium titanate (BaTiO3) multipods with high permittivity: impedance and temperature dependent dielectric behavior10.1039/C3RA44815K ↗
76. Exploring the conduction mechanism of multiferroic SrM–BCZT composite10.1016/j.ceramint.2019.09.243 ↗
77. Domain structure study of SrBi2 Ta2O9 ferroelectric thin films by scanning capacitance microscopy10.1063/1.1576308 ↗
78. Dielectric properties, microstructure and diffuse transition of Ni-doped Ba(Zr0.2Ti0.8)O3 ceramics10.1016/j.jallcom.2009.08.034 ↗
79. Poling electric field dependent domain switching and piezoelectric properties of mechanically activated (Pb0.92La0.08) (Zr0.60Ti0.40)O3 ceramics
80. Frequency dependence of polarization and strain in Bi0.5Na0.5TiO3-SrTiO3/Bi0.5 (Na0.8K0.2)0.5TiO3 composites10.1016/j.sna.2018.09.034 ↗
81. B.G. Baraskar, P.S. Kadhane, T.C. Darvade, A.R. James, R.C. Kambale, BaTiO3-based lead-free electroceramics with their ferroelectric and piezoelectric properties tuned by Ca2+, Sn4+ and Zr4+ substitution useful for electrostrictive device application (2018) 113.10.5772/intechopen.77388 ↗
82. Temperature dependence of polarization and strain in Bi0.5Na0.5TiO3-SrTiO3 multilayer composites10.1016/j.jallcom.2020.158488 ↗
83. Characterisation of barium titanate-silver composites part II: electrical properties10.1007/s10853-005-5162-y ↗
84. High temperature A.C. conductivity analysis of ZnO nanoparticles doped BaZr0.15Ti0.85O3 relaxor ceramics10.1016/j.physb.2020.412147 ↗
85. Unfolding grain size effects in barium titanate ferroelectric ceramics
86. Recent development in lead-free perovskite piezoelectric bulk materials10.1016/j.pmatsci.2018.06.002 ↗
87. Recent progress on advanced materials for solid-oxide fuel cells operating below 500° C10.1002/adma.201700132 ↗
88. Effect of surface modification of ceramic particles by SDS on the electrical properties of PZT-PVDF and BT-PVDF composites: interface effect
89. Preparation of highly dispersed ultrafine barium titanate powder by using microbial-derived surfactant10.1111/j.1151-2916.2003.tb03601.x ↗
90. Preparation and characterization of BaTiO3 powders and ceramics by the sol–gel process using organic monoacid as surfactant10.1016/j.scriptamat.2007.06.013 ↗
91. Preparation and characterization of BaTiO3 powders and ceramics by sol–gel process using oleic acid as surfactant10.1016/j.msea.2007.03.051 ↗
92. B. Cui, P. Yu, X. Wang, Preparation and characterization of BaTiO3 powders and ceramics by sol–gel process using decanedioic acid, J. Alloys Comp. 459 (2008) 589–593.10.1016/j.jallcom.2007.07.039 ↗
93. Preparation and characterization of BaTiO3 powders and ceramics by sol–gel process using hexanoic and hexanedioic acid as surfactant10.1016/j.mee.2008.11.003 ↗
94. C.-C Zheng, B. Cui, Q.-M You, Z.-G Chang, Characterization of BaTiO3 powders and ceramics prepared using the sol-gel process, with Triton X-100 used as a surfactant, in: Proceedings of the 7th National Conference on Functional Materials and Applications, Changsha, China, 2010, pp. 15–18.
95. Surfactant-assisted synthesis of mono-dispersed cubic BaTiO3 nanoparticles10.1016/j.materresbull.2014.05.036 ↗
96. Dispersion and rheology of BaTiO3 nanoparticles in ethanol–isopropanol solvents10.1007/s10832-007-9026-5 ↗
97. Impact of surfactants on physical properties of BaTiO3 nanoparticles10.1142/S0219581X13500038 ↗
98. Preparation and characterisation of BaTiO3 nanopowder by microwave assisted microemulsion method10.1179/1743676114Y.0000000206 ↗
99. Surfactant-assisted synthesis of BaTiO3 nanoparticles by micro-emulsion method