Effect of Zr substitution on electrical properties of Ba0.90Sr0.10Ti1−xZrxO3 (0 ≤ x ≤ 0.20) ceramics
Source abstract
Abstract
In this article, the effect of Zr addition on the crystalline structure, ferroelectric and piezoelectric properties of Barium Strontium Titanate (BST) ceramic have been studied. Zr was doped in the range of 0 ≤ x ≤ 0.20 in Ba 0.90Sr 0.10Ti 1-xZr xO 3 (BSZT) and it was prepared via solid state reaction technique. From the characterization studies, it was realized that Zr addition in BSZT ceramics results in slight modification of BSZT lattice, but due to diffusion of Zr into the lattice, the crystallite size as well as the microstructure of combined BSZT system got modified drastically. Zr addition in BSZT ceramics results in increase of lattice parameter due to larger ionic radius of Zr ions compared to Ti ions. Reduction of grain and crystallite size was also observed, which affects the ferroelectric behaviour of BSZT ceramic by influencing the polarization contribution from individual domains. This causes a slow transformation of sharp paraelectric-ferroelectric transition to diffusive ferroelectric phase transition and it also introduces relaxation phenomenon in the system at higher Zr compostion, which convert it to a relaxor ferroelectric. At relaxor phase a decreased spontaneous polarization and slimmer P–E hysteresis loop was observed with increasing Zr content. The main reason behind this conversion and modification in microstructural properties is because of the presence of strain in BSZT lattice which is due to replacement of Zr 4+ (0.72 Å) inplace of smaller Ti 4+ (0.609 Å) in more than a tolerable limit. Substitution of Zr 4+ for Ti 4+ in BaSrTiO 3 introduces structural disorder, causing perturbations like local electric and strain fields. These perturbations reduce the long-range polar order resulting in relaxor behavior.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Cross · 1996
2. Ye · 2008
3. Advances in Lead-Free Piezoelectric Materials for Sensors and Actuators10.3390/s100301935 ↗
4. Shahid Anwar, P.R. Sagdeo and N. P. Lalla: Ferroelectric Relaxor behavior in Hafnium doped Barium-Titanateceramic: Solid State Comm. (2006) 138 331. https://doi.org/10.1016/j.ssc.2006.03.018.10.1016/j.ssc.2006.03.018 ↗
5. Structure, Performance, and Application of BiFeO3 Nanomaterials10.1007/s40820-020-00420-6 ↗
6. Shahid Anwar, P.R. Sagdeo, N. P. Lalla: Crossover from classical to Relaxor ferroelectric in Ba(Ti1-xHfx)O3 ceramic. J. Phys: Cond. Mat. (2006) 16, 8445. https://doi.org/10.1088/0953-8984/18/13/013.10.1088/0953-8984/18/13/013 ↗
7. A Sati, P Pokhriyal, A Kumar, S Anwar, A Sagdeo, NP Lalla, PR Sagdeo Origin of ferroelectricity in cubic phase of Hf substituted BaTiO3 Journal of Physics: Condensed Matter 33 (16), 165403 doi: 10.1088/1361-648X/abf0bf.10.1088/1361-648X/abf0bf ↗
8. Giant strain with low hysteresis in A–site–deficient (Bi0.5Na0.5)TiO3– based lead-free piezoceramics, Acta
9. Microscopic insight into electric fatigue resistance and thermally stable piezoelectric properties of (K, Na)NbO3–based ceramics10.1021/acsami.8b08445 ↗
10. T Badapanda , L S. Cavalcante G E Luz Jr., N C. Batista , Shahid Anwar , E Longo, effect of yttrium doping in Barium Zirconium Titanate ceramics: A Structural, impedance and modulus spectroscopy study; Metallurgical and Materials Transactions A; 44 (2013), 4296–4309. http://dx.doi.org/10.1007/s11661-013-1770-3.10.1007/s11661-013-1770-3 ↗
11. Subramanian Polar nano regions in lead free (Na0.5Bi0.5)TiO3-SrTiO3-BaTiO3 relaxors: An impedance spectroscopic study10.1016/j.jallcom.2017.02.257 ↗
12. Ultrahigh strain in site engineering-independent (Bi0.5Na0.5TiO3 – based relaxor-ferroelectrics10.1016/j.actamat.2018.01.054 ↗
13. H. Wang, H. Yuan, Q. Hu, Exploring the high-performance (1–x)BaTiO3– xCaZrO3 piezo-ceramics with multiphase coexistence (R–O–T) from internal lattice distortion and domain features, J. Alloys Compd. 853 (2021) 157167(1-9). https://doi.org/10.1016/j.jallcom.2020.157167.10.1016/j.jallcom.2020.157167 ↗
14. A comparative study of structural and electrical properties in lead–free BCZT ceramics: influence of the synthesis method10.1016/j.actamat.2018.05.029 ↗
15. Investigation of MnO2-doped (Ba, Ca)TiO3 lead-free ceramics for high power piezoelectric applications10.1111/jace.14894 ↗
16. Electromechanical properties of Ce-doped (Ba0.85Ca0.15) (Zr0.1Ti0.9)O3 lead-free piezoceramics10.1007/s40145-018-0304-2 ↗
17. Shahid Anwar, P.R. Sagdeo, N. P. Lalla: Locating the normal to relaxor phase boundary in Ba(Ti1−xHfx)O3 ceramics, Mat. Res. Bull. (2008) 43, 1761. https://doi.org/10.1016/j.materresbull.2007.07.013.10.1016/j.materresbull.2007.07.013 ↗
18. Diffuse phase transition and dielectric tunability of Ba(ZryTi1−y)O3 relaxor ferroelectric ceramics10.1016/j.actamat.2004.07.028 ↗
19. Energy storage properties and relaxor behavior of lead-free Ba1−xSm2x/3Zr0.15Ti0.85O3 ceramics10.1039/C7DT03140H ↗
20. Dielectric Response and Impedance Spectroscopy of 0.7Pb(Mg1/3Nb2/3)O3–0.3PbTiO3 Thin Films Mat10.1016/S0921-5107(03)00033-3 ↗
21. Nonlinear dynamic susceptibilities at the spin-glass transition of Ag:Mn10.1103/PhysRevLett.57.3288 ↗