Promising transparency and p-type conductivity of Li, Na, K and Rb-doped CaS: A first-principles study
Source abstract
Abstract
Using the first-principles method, the transparency and p-type conductivity for CaS are investigated. Our studies indicate CaS is an indirect gap semiconductor, and the band gap along Γ-X is 3.57 eV. The hole effective mass is 0.87 m 0 (m 0 is the mass of the free electron). Low absorption and reflectivity, as well as high transmittance ensure its transparency in the visible light region. Group VA (IA) atoms substituting S(Ca) are deep (shallow) acceptors. Based on hybrid functionals calculations, we find the ionization energies ε(0/-) for group IA atoms substituting Ca are less than 0.15 eV above the valance band maximum. The Li 2S, Na 2S, K 2S and Rb 2S are promising impurity sources. Taking Na-doped CaS as an example, we predict the holes′ concentration can reach 1.54 × 10 17cm −3 under S-rich condition. High transparency, smaller hole effective mass, low ionization energy and high concentration of holes imply that CaS is promising transparent p-type conducting material.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · 2D Materials and Applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors10.1038/nature03090 ↗
2. Fabrication and characterization of p-Si/n-In2O3 and p-Si/n-ITO junction diodes for optoelectronic device applications
3. Properties of Yb-added ZnO (Yb:ZnO) films as an energy-conversion layer on polycrystalline silicon solar cells10.1016/j.matchemphys.2021.124513 ↗
4. Hole-Transporting Materials in Inverted Planar Perovskite Solar Cells10.1002/aenm.201600474 ↗
5. Highly conductive SnO2 thin films for flat-panel displays10.1889/1.2709738 ↗
6. Photovoltaic conversion enhancement of a transparent NiO/CdO/ZnO pn junction device with a CdO transition layer10.1016/j.jallcom.2020.158430 ↗
7. Defect induced p-type conductivity in zinc oxide at high temperature: electron paramagnetic resonance spectroscopy10.1039/C7NR03988C ↗
8. Thermoelectrics with Earth Abundant Elements: High Performance p-type PbS Nanostructured with SrS and CaS10.1021/ja301772w ↗
9. The magnetocaloric and magnetic properties of the MnFe4Si3: Monte Carlo investigation10.1016/j.jallcom.2019.151785 ↗
10. Design of n-Type Transparent Conducting Oxides: The Case of Transition Metal Doping in In2O310.1002/aelm.201700553 ↗
11. p-Type transparent amorphous oxide thin-film transistors using low-temperature solution-processed nickel oxide10.1016/j.jallcom.2019.07.108 ↗
12. The electronic structures and p-type performance of group IA and VA atoms in NiO: A first principles study10.1063/5.0084911 ↗
13. P-type electrical conduction in transparent thin films of CuAlO210.1038/40087 ↗
14. p-channel thin-film transistor using p-type oxide semiconductor, SnO10.1063/1.2964197 ↗
15. First principles calculations of intrinsic mobilities in tin-based oxide semiconductors SnO, SnO2 and Ta2SnO610.1063/1.5109265 ↗
16. Design of p-type transparent conductors from inverted band structure: The case of inorganic metal halide perovskites
17. Solution-Processed High-Performance p-Type Perovskite NdAlO3 Thin Films for Transparent Electronics10.1002/aelm.201901110 ↗
18. Defect compensation in the p-type transparent oxide Ba2BiTaO610.1039/C9TC06919D ↗
19. Exotic Structural and Optoelectronic Properties of Layered Halide Double Perovskite Polymorphs10.1002/adfm.202008620 ↗
20. P-type transparent conducting oxides
21. Latest directions in p-type transparent conductor design10.1039/D1TC02547C ↗
22. Design Principles of p-Type Transparent Conductive Materials10.1021/acsami.9b01255 ↗
23. The structural, electronic and optical response of IIA-VIA compounds through the modified Becke-Johnson potential10.1016/j.physb.2012.09.050 ↗
24. Broadband NIR photostimulated luminescence nanoprobes based on CaS:Eu2+, Sm3+ nanocrystals10.1039/C9SC01321K ↗
25. Practical doping principles10.1063/1.1584074 ↗
26. P. Hohenberg, W. Kohn, Inhomogeneous Electron Gas, Phys. Rev. 136 (1964) B864–B871.10.1103/PhysRev.136.B864 ↗
27. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
28. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
29. Generalized Gradient Approximation Made Simple10.1103/PhysRevLett.77.3865 ↗
30. Electron Counting and a Large Family of Two-Dimensional Semiconductors10.1021/acs.chemmater.5b03557 ↗
31. First-principles study of band alignments in the p-type hosts BaM2X2(M=Cu, Ag; X= S, Se)
32. Structural, electronic and magnetic properties of the perovskite YMnO310.1016/j.ssc.2021.114254 ↗
33. Hybrid functionals based on a screened Coulomb potential10.1063/1.1564060 ↗
34. Optimization of Doping CdTe with Group-V Elements: A First-Principles Study10.1103/PhysRevApplied.15.054045 ↗
35. Computationally driven high-throughput identification of CaTe and Li3Sb as promising candidates for high-mobility p-type transparent conducting materials
36. More Se Vacancies in Sb2Se3 under Se-Rich Conditions: An Abnormal Behavior Induced by Defect-Correlation in Compensated Compound Semiconductors10.1002/smll.202102429 ↗
37. Overcoming the doping bottleneck in semiconductors10.1016/j.commatsci.2004.02.024 ↗
38. First-principles study of defect properties of zinc blende MgTe10.1103/PhysRevB.83.235208 ↗
39. Carrier density and compensation in semiconductors with multiple dopants and multiple transition energy levels: Case of Cu impurities in CdTe10.1103/PhysRevB.83.245207 ↗
40. Periodic boundary conditions in ab initio calculations10.1103/PhysRevB.51.4014 ↗
41. VASPKIT: A user-friendly interface facilitating high-throughput computing and analysis using VASP code10.1016/j.cpc.2021.108033 ↗
42. X-Ray Diffraction Studies of Systems Involved in the Preparation of Alkaline Earth Sulfide and Selenide Phosphors110.1021/ja01186a018 ↗
43. Structural evolution and electronic properties of CaS: An ab initio study10.1016/j.solidstatesciences.2019.02.003 ↗
44. Electronic structure of MS(M=Ca, Mg, Fe, Mn):X-ray absorption analysis10.1103/PhysRevB.69.134109 ↗
45. Origin of p-type doping difficulty in ZnO: The impurity perspective10.1103/PhysRevB.66.073202 ↗
46. Ab initio study of the bandgap engineering of Al1-xGaxN for optoelectronic applications10.1063/1.3531996 ↗
47. Transparent conducting materials discovery using high-throughput computing10.1038/s41524-019-0200-5 ↗
48. Review on first-principles study of defect properties of CdTe as a solar cell absorber10.1088/0268-1242/31/8/083002 ↗
49. Effective Band Structure of Random Alloys10.1103/PhysRevLett.104.236403 ↗
50. Unfolding First-Principles Band Structures10.1103/PhysRevLett.104.216401 ↗
51. Commentary: The Materials Project: A materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
52. Incorporation and optical properties of magnesium in cubic GaN epilayers grown by molecular beam epitaxy10.1063/1.122298 ↗
53. Origin of Deep Be Acceptor Levels in Nitride Semiconductors: The Roles of Chemical and Strain Effects10.1103/PhysRevApplied.11.034019 ↗
54. Understanding Doping of Quantum Materials10.1021/acs.chemrev.0c00608 ↗
55. Equilibrium point defect and charge carrier concentrations in a material determined through calculation of the self-consistent Fermi energy10.1016/j.cpc.2019.06.017 ↗