journal article·2021-01Open access

p-Type transparent Cu2S thin film grown by Thermionic Vacuum Arc for optoelectronic applications

Hüseyin Kaan Kaplan, Sertan Kemal Akay, Suat Pat, Mohamed Henini

Abstract

Abstract In this study, we have used a new single-step method for producing Cu2S thin films, which have good transparency in the visible range and high hole conductivity properties suitable for a wide range of optoelectronic device applications. Cu2S thin films are deposited by the Thermionic Vacuum Arc method, which is capable of very high deposition rates with high uniformity. The structural properties were determined by XRD analysis, and the morphological features were examined by AFM and SEM techniques. From XRD studies, the thin films were found to have a nano-crystalline form. The morphology images showed that the thin films have very low surface roughness. The bandgap of the film was calculated. The electrical properties of the films such as resistivity, majority carrier, and concentration were determined by Hall Effect measurements. In addition, the figure of merit value was calculated for p-type Cu2S transparent conducting thin films using the Haacke’s formula.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Stabilizer free copper sulphide nanostructures for rapid photocatalytic decomposition of rhodamine B10.1016/j.molcata.2015.08.028 ↗
2. Rose-like CuS microflowers and their enhanced visible-light photocatalytic performance10.1039/C8CE00888D ↗
3. A versatile chemical conversion synthesis of Cu2S nanotubes and the photovoltaic activities for dye-sensitized solar cell10.1186/1556-276X-9-513 ↗
4. Cation exchange synthesis of CuS nanotubes composed of nanoparticles as low-cost counter electrodes for dye-sensitized solar cells10.1016/j.mseb.2017.10.008 ↗
5. Electrochemical behaviors of CuS as a cathode material for lithium secondary batteries10.1016/S0378-7753(02)00024-1 ↗
6. Copper sulfide nanoparticles as a photothermal switch for TRPV1 signaling to attenuate atherosclerosis
7. An investigation on substrate temperature and copper to sulphur molar ratios on optical and electrical properties of nanostructural CuS thin films prepared by spray pyrolysis method10.1016/j.apsusc.2012.02.079 ↗
8. Transparent p-type CuxS thin films10.1016/j.jallcom.2011.01.174 ↗
9. Effect of annealing on the electrical properties of CuxS thin films10.1016/j.proche.2016.03.005 ↗
10. Electrical conductivity in copper sulfides – influence of the deposition parameters and precursor’s concentration
11. Tunable self‐powered n‐SrTiO 3 photodetectors based on varying CuS‐ZnS nanocomposite film (p‐CuZnS, p‐CuS, and n‐ZnS)10.1002/inf2.12035 ↗
12. Solution-processed transparent self-powered p-CuS-ZnS/n-ZnO UV photodiode10.1002/pssr.201700381 ↗
13. A real-time wearable UV-radiation monitor based on a high-performance p-CuZnS/n-TiO 2 photodetector10.1002/adma.201803165 ↗
14. Self-powered n-SnO 2 /p-CuZnS core-shell microwire uv photodetector with optimized performance10.1002/adom.201800213 ↗
15. Single-crystalline ZnS nanobelts as ultraviolet-light sensors10.1002/adma.200802441 ↗
16. Chemical bath deposition of p-type transparent, highly conducting (CuS) x :(ZnS) 1– x nanocomposite thin films and fabrication of si heterojunction solar cells10.1021/acs.nanolett.5b05124 ↗
17. ZnS nanostructure arrays: a developing material Star10.1002/adma.201003624 ↗
18. Preparation and characterization of nanocrystalline CuS thin films for dye-sensitized solar cells
19. The effect of complexing agent on crystal growth, structure and properties of nanostructured Cu2−xS thin films10.1016/j.cclet.2014.06.003 ↗
20. Investigation on optical properties of CuS and Zn doped CuS thin films by chemical bath deposition method10.9790/4861-0804031316 ↗
21. CuS thin film grown using the one pot, solution-process method for dye-sensitized solar cell applications10.1016/j.jallcom.2017.03.026 ↗
22. High figure of merit p-type transparent conducting thin film based on solution processed CuS-ZnS nanocomposite10.1016/j.jallcom.2018.08.178 ↗
23. P-type CuxS thin films: integration in a thin film transistor structure10.1016/j.tsf.2013.03.141 ↗
24. Structural and optical properties of CuS thin films deposited by thermal co-evaporation10.1088/1757-899X/73/1/012123 ↗
25. Study of CuS thin films for solar cell applications sputtered from nanoparticles synthesised by hydrothermal route10.1016/j.egypro.2015.12.314 ↗
26. High figure-of-merit p -type transparent conductor, Cu alloyed ZnS via radio frequency magnetron sputtering10.1088/1361-6463/aa95b3 ↗
27. Atomic layer deposition of conducting CuS thin films from elemental sulfur10.1002/admi.201701366 ↗
28. The growth of thin films of copper chalcogenide films by MOCVD and AACVD using novel single-molecule precursors10.1023/A:1019665428255 ↗
29. New routes to copper sulfide nanostructures and thin films10.1039/c1jm13277f ↗
30. Annealing and light effect on structural, optical and electrical properties of CuS, CuZnS and ZnS thin films grown by the SILAR method10.1016/j.physe.2009.04.014 ↗
31. Temperature dependent electrical characteristics Of Cu/CuS/n-Si/Au-Sb structure deposited By SILAR method10.1063/1.3663085 ↗
32. New figure of merit for transparent conductors10.1063/1.323240 ↗
33. Investigation on the morphology and surface free energy of the AlGaN thin film10.1016/j.jallcom.2015.08.225 ↗
34. Deposition of a Mo doped GaN thin film on glass substrate by thermionic vacuum arc (TVA)10.1007/s10854-015-3027-y ↗
35. Cullity · 1978 · 149
36. Determination of the structural, morphological and optical properties of graphene doped SnO thin films deposited by using thermionic vacuum arc technique10.1016/j.physb.2019.05.035 ↗
37. Tauc · 1972 · 372
38. Microstructural and optical properties of CuS nanoparticles prepared sol-gel route10.1016/j.pisc.2016.06.041 ↗
39. Electrical and optical properties of indium-tin oxide (ITO) films by ion-assisted deposition at room temperature10.1007/s12541-013-0197-5 ↗
40. High mobility indium tin oxide thin film and its application at infrared wavelengths: model and experiment10.1364/OE.26.022123 ↗
41. High quality ITO thin films grown by dc and RF sputtering without oxygen10.1088/0022-3727/43/5/055402 ↗
42. Photoelectric detectors based on inorganic p‐type semiconductor materials10.1002/adma.201706262 ↗
43. Optical and electrical properties of copper sulfide films of variable composition10.1006/jssc.1995.1070 ↗
44. Transparent conducting p-type NiO thin films prepared by magnetron sputtering10.1016/0040-6090(93)90636-4 ↗
45. Transparent, conductive CuI films prepared by rf-dc coupled magnetron sputtering10.1016/0040-6090(96)08607-5 ↗
46. SrCu2O2: A p -type conductive oxide with wide band gap10.1063/1.121761 ↗
47. Electronic structure and optoelectronic properties of transparent p-type conducting CuAlO210.1063/1.1308103 ↗
48. Epitaxial growth of transparent p-type conducting CuGaO2 thin films on sapphire (001) substrates by pulsed laser deposition10.1063/1.1337587 ↗
49. Preparation of transparent p-type (La1−xSrxO)CuS thin films by r.f. sputtering technique10.1016/S0040-6090(02)00200-6 ↗
50. Combinatorial synthesis of Li-doped NiO thin films and their transparent conducting properties10.1016/j.apsusc.2005.03.239 ↗
51. p-type transparent conductor: Zn-doped CuAlS210.1063/1.2591415 ↗
52. Sol–gel derived N-doped ZnO thin films10.1016/j.matlet.2009.07.038 ↗
53. Transparent p-type SnOx thin film transistors produced by reactive rf magnetron sputtering followed by low temperature annealing10.1063/1.3469939 ↗
54. Copper-alloyed ZnS as a p-type transparent conducting material10.1002/pssa.201228181 ↗
55. Room-temperature synthesized copper iodide thin film as degenerate p-type transparent conductor with a boosted figure of merit10.1073/pnas.1613643113 ↗
56. Synthesis of nanocrystalline Cu deficient CuCrO 2 – a high figure of merit p-type transparent semiconductor10.1039/C5TC03161C ↗
57. P-type transparent Cu-alloyed ZnS deposited at room temperature10.1002/aelm.201500396 ↗