journal article·2002-06

Evolution of microstructure and texture during industrial processing of FeAl sheets

D.G Morris, S.C Deevi

Publisher page

Abstract

We report the evolution of texture and microstructures during thermomechanical processing of roll compacted Fe-40A1 (at.%) sheets produced from water atomized powders. The oxide films present on the surface of the powder are transformed into discrete particles due to multiple cold rolling steps, and serve to pin grain boundaries leading to improved strength and ductility. In addition, oxide particles limit the grain growth when the sheets are exposed to temperatures in the range of 1000-1200 °C. The carbon present in the alloy remains in solution during the roll-anneal processing steps, but is precipitated as fine perovskite particles on ageing. Interestingly, FeA1 sheets manufactured by roll compaction followed by cold rolling and annealing treatments exhibit only very weak textures in the sheets with no differences between sheet centre and surface detected. © 2002 Elsevier Science B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Vedula · 1995 · 2 · 199
2. Baker · Int. Mater. Rev. · 1997 · 42 · 18810.1179/imr.1997.42.5.181 ↗
3. Baker · Mater. Sci. Eng. · 1987 · 96 · 14710.1016/0025-5416(87)90549-0 ↗
4. R. Baccino, D. San Filippo, F. Moret, A. Lefort G. Webb, Powder Metallurgy World Congress PM94, Paris, France, 6–9 June 1994, pII.1239.
5. S.C. Deevi, P.J. Maziasz, V.K. Sikka, R.W. Cahn (Eds.) International Symposium on Nickel and Iron Aluminides: Processing, Properties and Applications, ASM, Materials Park, Ohio, 1997.10.1080/10667857.1997.11752751 ↗
6. S.C. Deevi, D.G. Morris, J.H. Schneibel V.K. Sikka, Iron Aluminides: Alloy Design, Processing, Properties and Applications, TMS Meeting, San Antonio, Texas, 15–19 February, 1998, Mater. Sci. and Eng. 1998, A258.10.1016/S0921-5093(98)00908-3 ↗
7. Stoloff · Intermetallics · 1994 · 2 · 7510.1016/0966-9795(94)90001-9 ↗
8. Tassa · Scr. Metall. Mater. · 1992 · 26 · 181310.1016/0956-716X(92)90040-L ↗
9. Hajaligol · Mater. Sci. Eng. A · 1998 · 258 · 24910.1016/S0921-5093(98)00941-1 ↗
10. Deevi · Intermetallics · 2000 · 8 · 67910.1016/S0966-9795(99)00129-6 ↗
11. Jaske · Mater. Sci. Eng. A · 1998 · 258 · 21110.1016/S0921-5093(98)00936-8 ↗
12. Deevi · Mater. Sci. Eng. A · 1998 · 258 · 204
13. McKamey · J. Mater. Res. · 1992 · 7 · 208910.1557/JMR.1992.2089 ↗
14. Benghalem · Acta Metall. Mater. · 1994 · 42 · 407110.1016/0956-7151(94)90184-8 ↗
15. Morris · Scr. Mater. · 1996 · 35 · 121110.1016/1359-6462(96)00272-2 ↗
16. Raabe · Phil. Mag. A · 1995 · 71 · 80510.1080/01418619508236221 ↗
17. Bunge · 1982
18. Morris · Intermetallics · 1995 · 3 · 48310.1016/0966-9795(95)00007-L ↗
19. Mao · Scr. Metal. Mater. · 1993 · 29 · 21710.1016/0956-716X(93)90311-F ↗
20. Raabe · Mater. Sci. Eng. A · 1995 · 203 · 20810.1016/0921-5093(95)09872-0 ↗
21. D.G. Morris, M.A. Morris-Muñoz, Intermetallics, in press.
22. Nishida · Tech. Rept. Hokaido University · 1968 · 48 · 71
23. Palm · Intermetallics · 1995 · 3 · 44310.1016/0966-9795(95)00003-H ↗
24. Pang · 1997 · 703
25. Pang · Acta Mater. · 1998 · 46 · 401710.1016/S1359-6454(98)00075-5 ↗
26. Yoshimi · Phil. Mag. A · 1996 · 73 · 443045610.1080/01418619608244393 ↗
27. Pang · Phil. Mag. Letts. · 1998 · 78 · 34910.1080/095008398177742 ↗
28. Pang · Mater. Sci. Eng. A · 1998 · 258 · 16110.1016/S0921-5093(98)00929-0 ↗
29. Chisholm · Phil. Mag. · 2000 · A80 · 273710.1080/01418610008216502 ↗