Facile In Situ Chemical Cross-Linking Gel Polymer Electrolyte, which Confines the Shuttle Effect with High Ionic Conductivity and Li-Ion Transference Number for Quasi-Solid-State Lithium–Sulfur Battery

As a secondary Li-ion battery with high energy density, lithium–sulfur (Li–S) batteries possess high potential development prospects. One of the important ingredients to improve the safety and energy density in Li–S batteries is the solid-state electrolyte. However, the poor ionic conductivity largely limits its application for the commercial market. At present, the gel electrolyte prepared by combining the electrolyte or ionic liquid with the all-solid electrolyte is an effective method to solve the low ion conductivity of the solid electrolyte. We present a cross-linked gel polymer electrolyte with fluoroethylene carbonate (FEC) as a solid electrolyte interface (SEI) film formed for Li–S quasi-solid-state batteries, which can be simply synthesized without initiators. This gel polymer electrolyte with FEC as an additive (GPE@FEC) possesses high ionic conductivity (0.830 × 10–3 S/cm at 25 °C and 1.577 × 10–3 S/cm at 85 °C) and extremely high Li-ion transference number (tLi+ = 0.674). In addition, the strong ability toward anchoring polysulfides resulting in the high electrochemical performance of Li–S batteries was confirmed in GPE@FEC by the diffusion experiment, X-ray photoelectron spectroscopy analysis (XPS), and scanning electron microscopy (SEM) mapping of the S element. Such a high ion conductivity (IC) gel polymer electrolyte enables a competitive specific capacity of 940 mAh/g at 0.2C and supreme cycling performance for 180 cycles at 0.5C, which is far beyond that of conventional poly(ethylene oxide)-based quasi-solid-state Li–S batteries.