Wavelength-Tunable Optical Fiber Localized Surface Plasmon Resonance Biosensor via a Diblock Copolymer-Templated Nanorod Monolayer

Well-dispersed and dense layers of gold nanorods (AuNRs) on optical fibers are shown to regulate the longitudinal peak wavelength and enhance the sensing performances of localized surface plasmon resonance (LSPR) biosensors. A simple self-assembly method relying on a brush-like monolayer of poly(styrene)-b-poly(acrylic acid) (PS-b-PAA) diblock copolymer was used to immobilize AuNRs with various aspect ratios from 2.33 to 4.60 on optical fibers. Both the experimental and simulation results illustrated that the particle aspect ratio, deposition time (related to the coverage of AuNRs), and interparticle gap significantly affected the optical properties of the fiber-based LSPR biosensors. The highest refractive index (RI) sensitivity of the sensor was 753 nm/RIU, while the limit of detection for human IgG was as low as 0.8 nM. Compared with standard nanoparticle deposition methods of polyelectrolytes or alkoxysilanes, the RI sensitivity of the PS-b-PAA dip-coating method was approximately 3-fold better, a consequence of the higher particle coverage and fewer AuNR aggregates. The presented AuNR-based LSPR sensors could regulate the detection range by tuning the aspect ratios of AuNRs. Applicability is demonstrated via quantitative analysis of antigen–antibody interactions, DNA sensing, and surface-enhanced Raman scattering.