Effect of Water Vapor Adsorption on Electrical Properties of Carbon Nanotube/Nanocrystalline Cellulose Composites

It has been long known that the electrical properties of cellulose are greatly influenced by adsorption of water vapor. Incorporating conductive nanofillers in a cellulose matrix is an example of an approach to tailor their characteristics for use in electronics and sensing devices. In this work, we introduce two new nanocomposites comprising carbon nanotubes (CNTs) and conventional or electrosterically stabilized nanocrystalline celluloses matrices. While conventional nanocrystalline cellulose (NCC) consists of a rigid crystalline backbone, electrosterically stabilized cellulose (ENCC) is composed of a rigid crystalline backbone with carboxylated polymers protruding from both ends. By tuning CNT loading, we can tailor a CNT/NCC composite with minimal electrical sensitivity to the ambient relative humidity, despite the fact that the composite has a high moisture uptake. The expected decrease in CNT conductivity upon water vapor adsorption, due to electron donation, is counterbalanced by an increase in the conductivity of NCC due to proton hopping at an optimum CNT loading (1-2%). Contrary to the CNT/NCC composite, a CNT/ENCC composite at 1% CNT loading shows insulating behavior for relative humidities up to 75%, after which the composite becomes conductive. This interesting behavior can be ascribed to the low moisture uptake of ENCC at low and moderate relative humidities due to the limited number of hydroxyl groups and hydrogen bond formation between carboxyl groups on ENCC, which endow ENCC with limited water molecule adsorption sites.