Overall Distribution of Rubidium in Highly Efficient Cu(In,Ga)Se₂ Solar Cells

Thin-film solar cells based on Cu(In,Ga)Se2 (CIGS) absorbers have achieved conversion efficiencies close to 23%. Such a high performance could be reached by incorporating heavy alkali elements into the CIGS absorber using an alkali fluoride post-deposition treatment (PDT). In order to improve the understanding of the effect of the PDT, we investigated a highly efficient CIGS solar cell whose absorber was subjected to a RbF-PDT. By applying synchrotron-based X-ray fluorescence analysis in combination with scanning transmission electron microscopy and electron backscatter diffraction to a cross-sectional lamella of the whole device, we were able to correlate the local composition of the absorber with its microstructure. The incorporated Rb accumulates at grain boundaries, with a random misorientation of the adjacent grains, at the p–n junction, and at the interface between the absorber and the MoSe2 layer. The accumulation of Rb at the grain boundaries is accompanied by a reduced Cu concentration and slightly increased In and Se concentrations. Additionally, variations in the local composition of the absorber at the p–n junction indicate the formation of a secondary phase, which exhibits a laterally inhomogeneous distribution. The improved solar cell performance due to RbF-PDT can thus be expected to originate from a favorable modification of the back contact interface, the random grain boundaries, the p–n junction, or a combination of these effects.