Carbon-Coated Fe–Mn–O Composites as Promising Anode Materials for Lithium-Ion Batteries

Fe-Mn-O composite oxides with various Fe/Mn molar ratios were prepared by a simple coprecipitation method followed by calcining at 600 °C, and carbon-coated oxides were obtained by pyrolyzing pyrrole at 550 °C. The cycling and rate performance of the oxides as anode materials are greatly associated with the Fe/Mn molar ratio. The carbon-coated oxides with a molar ratio of 2:1 exhibit a stable reversible capacity of 651.8 mA h g(-1) at a current density of 100 mA g(-1) after 90 cycles, and the capacities of 567.7, 501.3, 390.7, and 203.8 mA h g(-1) at varied densities of 200, 400, 800, and 1600 mA g(-1), respectively. The electrochemical performance is superior to that of single Fe3O4 or MnO prepared under the same conditions. The enhanced performance could be ascribed to the smaller particle size of Fe-Mn-O than the individuals, the mutual segregation of heterogeneous oxides of Fe3O4 and MnO during delithiation, and heterogeneous elements of Fe and Mn during lithiation.