Development and surface properties of polyamide 6 and quasicrystal composite coatings recycled via spin coating technique
Source abstract
Abstract
Abstract In search to meet technological demands, material studies as well as techniques to process them have been increasing worldwide, thus seeking to unite lower processing costs, the best properties of the materials involved, reuse of resources and more sustainable means. Thus, the development of new materials, coatings and composites have stood out in the market. For this work, we fetch the development and characterization of polyamide 6 composite coatings with quasicrystalline AlCuFe fillers, recycled through the spin coating technique, since that little is known about the interaction between these two materials, which have excellent isolating properties, and little is observed about the use of this technique to produce coatings with metallic loads. The recycled AlCuFe quasicrystalline alloy was manufactured by conventional induction casting. Polyamide 6 coatings with quasicrystalline particles were developed with additions of 0, 1, 3 and 5 (% vol.) quasicrystal, via Spin Coating technique. Thermogravimetric analyses (TG), differential scanning calorimetry (CSD), average roughness (RA), contact angle, surface energy and scanning electron microscopy (SEM) were performed to characterize this material. Being observed an increase in the thermal stability of the composite, reduction in average roughness (Ra) and surface energy values, with increase in quasicrystal fraction in the polymer matrix. In addition to hydrophobicity and oleophilic character of the samples with the addition of quasicrystalline loads. It can be concluded, in general, that the Spin Coating technique is effective in the production of polyamide composite coatings 6 with recycled quasicrystals, presenting interesting surface properties with potential for further studies in innovative applications, such as semiconductors and surface coatings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Quasicrystal Structures and Properties · Polymer Nanocomposites and Properties · Material Dynamics and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Controlling cell behavior through the design of biomaterial surfaces: a focus on surface modification techniques10.1002/admi.201900572 ↗
2. Implication of surface properties, bacterial motility, and hydrodynamic conditions on bacterial surface sensing and their initial adhesion10.3389/fbioe.2021.643722 ↗
3. Testing the mechanical and tribological properties of new metal-polymer nanocomposite materials based on linear low-density polyethylene and Al65Cu22Fe13 quasicrystals10.1016/j.polymertesting.2019.01.004 ↗
4. Effect of friction on the degree of crystallinity of composite materials based on ultra-high-molecular-weight polyethylene and polytetrafluoroethylene with quasicrystalline filler Al–Cu–Fe10.1134/S1063774520040094 ↗
5. Fundamentos da Ciência e engenharia de materiais: uma abordagem integrada, LTC, 4ª Ed. Rio de Janeiro
6. Polyamides, polyesters and elastomeric thermoplastics: a sustainable perspective in modern industry10.1590/S0104-14282012000200003 ↗
7. Brydson · 1985
8. Kohan · 1995
9. Semiconducting small molecule/polymer blends for organic transistors10.1016/j.polymer.2020.122208 ↗
10. Polymer semiconductor crystals10.1016/S1369-7021(10)70080-8 ↗
11. Characterization of hybrid organic/inorganic semiconductor materials for potential light emitting applications10.1016/j.optmat.2020.110117 ↗
12. Polímeros condutores: descoberta e aplicações
13. Semiconductor/boron nitride composites: synthesis, properties, and photocatalysis applications10.1016/j.apcatb.2018.07.011 ↗
14. Study of the surface properties of the epoxy/quasicrystal composite10.1016/j.jmrt.2018.04.015 ↗
15. Can we decrease the ecological footprint of base metal production by recycling
16. Formation of ethylene-vinyl acetate composites filled with Al–Cu–Fe and Al–Cu–Cr quasicrystallline particles10.1016/j.jmrt.2018.05.008 ↗
17. Friction and fretting on quasicrystals under vacuum10.1016/j.jnoncrysol.2003.12.027 ↗
18. Bulk and surface properties of quasicrystalline materials and their potential applications
19. Quasicrsals: exemplary multidisciplinary research
20. Formation and properties of quasicrystals10.1146/annurev.matsci.38.060407.130318 ↗
21. Study of the surface properties of the epoxy/quasicrystal composite10.1016/j.jmrt.2018.04.015 ↗
22. Al–Cu–Fe quasicrystal/ultra-high molecular weight polyethylene composites as biomaterials for acetabular cup prosthetics10.1016/S0142-9612(01)00301-5 ↗
23. ‘The influence of heat treatment of inorganic conversion coatings produced by sol-gel dip coating on the anticorrosive properties of alumina films deposited on steel substrate: I. Single conversion coatings10.1016/j.surfcoat.2019.05.040 ↗
24. Interfacial nanostructures and acidichromism behaviors in self-assembled terpyridine derivatives Langmuir-Blodgett films10.1016/j.colsurfa.2018.12.031 ↗
25. Spin coating method improved the performance characteristics of films obtained from poly (lactic acid) and cellulose nanocrystals10.1016/j.susmat.2020.e00212 ↗
26. A percolation network model to predict the electrical property of flexible CNT/PDMS composite films fabricated by spin coating technique10.1016/j.compositesb.2019.107034 ↗
27. High performance CaCu3Ti4O12/cyanate ester composites with excellent dielectric properties and thermal resistance10.1016/j.compositesa.2010.08.002 ↗
28. Spin coating of conjugated polymers for electronic and optoelectronic applications10.1016/j.tsf.2004.12.013 ↗
29. Phase composition, crystalline structure and piezoelectric properties of thin films of polyvinylidene fluoride obtained by the spin-coating method10.1016/j.porgcoat.2020.105857 ↗
30. Fundamental understanding and modeling of spin coating process: a review10.1007/s12648-009-0009-z ↗
31. Optimization of the interface/interphase of carbon fiber/PPS thermoplastic composites using BTDA/DDS poly (amic acid)10.1590/S0104-14282007000300005 ↗
32. Resolução lamelar num novo microscópio eletrônico de varredura10.1590/S0104-14281997000100010 ↗
33. Crystallization behavior of nylon 6 nanocomposites10.1016/S0032-3861(03)00344-6 ↗
34. Quasicrystalline metal powder: a potential filler for UHMWPE composites10.1590/1980-5373-MR-2021-0379 ↗
35. Interfacial free energy governs single polystyrene chain collapse in water and aqueous solutions10.1021/ja101155h ↗
36. Method for the prediction of the particle attachment to the bubble in oil at elevated temperatures10.1016/j.powtec.2014.12.024 ↗
37. Fair Jr Liquid flow over textured surfaces 1. Contact angles10.1021/ie9800344 ↗
38. PolymerAayered silicate nanocomposites: a review from preparation to processing10.1016/j.progpolymsci.2003.08.002 ↗
39. The effects of annealing (solid and melt) on the time evolution of the polymorphic structure of polyamide 610.1002/app.31190 ↗
40. Thermo-oxidative ageing effect on mechanical properties and morphology of short fibre reinforced polyamide composites–comparison of carbon and glass fibres10.1039/C7RA07884F ↗
41. Low‐defect graphene–polyamide‐6 composites and modeling the filler–matrix interface10.1002/app.48630 ↗
42. Polyamide 6 nanocomposites and organophilic clay: Study of crystallinity and mechanical properties
43. Evaluation of thermal behavior by CSD in the skin and core region of samples injected of polyamide 6 nanocomposites/organophilic clay
44. Thermal, mechanical and rheological behaviors of nanocomposites based on UHMWPE/paraffin oil/carbon nanofiller obtained by using different dispersion techniques10.1007/s11837-016-1845-x ↗
45. Evaluation of microhardness and roughness of resin composites of direct and indirect use
46. Canevarolo · Ciência dos Polímeros: a Basic Text For Technologists and Engineers. · 2013
47. Neto · Structural Composites Science and Technology · 2006
48. Mechanical and surface properties of Aluminum-Copper-Iron quasicrystal thin films10.1016/j.jallcom.2017.10.229 ↗
49. Development and characterization of thin polymer films relevant to fiber processing10.1016/j.tsf.2009.03.015 ↗