Electrical properties of the perovskite Y0.9Sr0.1CoO3−δ prepared by a solution method

Abstract Single-phase Y 0.9 Sr 0.1 CoO 3− δ powders were prepared using a solution method based on the dissolution in aqueous media of stoichiometric amounts of yttrium, strontium and cobalt nitrates. Precursor powders were slowly heated from 90 to 950 °C in air. Structural evolution was investigated by X-ray powder diffraction (XRD) as a function of increasing calcination temperature. Differential thermal analysis performed up to 1200 °C was used to identify the temperature of formation for Y 0.9 Sr 0.1 CoO 3− δ , which occurred at ∼912 °C. Single-phase polycrystalline powders having the perovskite structure were synthesized at 950 °C, their microstructure and particle size were determined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Thick films of Y 0.9 Sr 0.1 CoO 3− δ were deposited by the screen printing method on alumina substrates, in order to evaluate their electrical conductivity from room temperature to 700 °C. These measurements were performed in presence of air, oxygen and nitrogen. A semiconductor behavior with possible mixed ionic-electronic conductivity was observed. Sensitivity to nitrogen and oxygen showed a maximum at 579 and 557 °C, respectively.