journal article·2025-10Open access

Tuning dielectric and nonohmic properties of CaCu3Ti4O12 ceramics with W doping

H. Moreno, V.C. Teixeira, M.A. Ponce, C.E. Macchi, C.M. Aldao, V.D.N. Bezzon, A.Z. Simões, M.A. Ramirez

Abstract

This study investigates the dielectric and nonohmic properties of the CaCu 3 Ti 4 O 12 : x % W ( x = 0.00, 0.02, 0.010, 2.50, 5.00) denoted as CCTO, W002, W010, W250, and W500, respectively. X-ray diffraction analysis confirmed a pseudo-cubic perovskite phase (Im-3 space group) for samples, and a CaCu 3 Ti 4 O 12 /CaWO 4 /TiO 2 composite system for high W content (W250, W500), supported by energy dispersive spectroscopy (EDS) and X-ray fluorescence (XRF) measurements. Positron annihilation lifetime spectroscopy identified V C u ″ / V C a ″ vacancies as the main defects induced by W incorporation, influencing charge carrier mobility at grain boundaries, thus affecting sintering, grain size, and morphology. Lower W content (W002) resulted in a high dielectric response ( ε ∼1.2 × 10 4 ) with improved tan δ (0.02). Conversely, W250 exhibited higher nonlinear coefficient (α∼38), with low leakage current ( I L ∼14.6 μA/cm 2 ) and breakdown voltage ( Eb ∼198 V. cm −1 ). This solid-state synthesis method provides a way to customize TiO 2 /CaWO 4 -doped CCTO matrices, showcasing promising varistor characteristics that are well-suited for hybrid capacitor-varistor devices and related applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Improving dielectric properties of (Zn2+, Al3+) Co-doped CaCu3Ti4O12 perovskite ceramics by enhancing the grain boundary response10.1016/j.ceramint.2023.04.138 ↗
2. Microstructure and dielectric properties of Na and Ni co-substituted CaCu3Ti4O12 ceramics with high dielectric constant and low loss10.1016/j.matchemphys.2024.128973 ↗
3. Structural, optical, and dielectric study of hydrothermally synthesized barium-doped PbTiO3 (0≤x≤0.9) perovskite materials10.1007/s00339-023-07130-x ↗
4. Dielectric properties of BaTiO3 and Ba0.95Ca0.05TiO3 sintered in a reducing atmosphere10.1016/j.ceramint.2023.06.134 ↗
5. Analysis of giant dielectric permittivity and electrical properties for energy storage devices through impedance spectroscopy in CaCu3Ti4O1210.1007/s10854-021-07338-8 ↗
6. The effect of lithium doping on the dielectric properties of solid solutions LixCa(1−x)Cu3Ti4O12 (x = 0.01–0.1)10.3390/jcs7070282 ↗
7. A core-shell synthesis of CaCu3Ti4O12 (CCTO) ceramics showing colossal permittivity and low electric losses for application in capacitors10.1016/j.solidstatesciences.2020.106431 ↗
8. Very high performance dielectric and non-ohmics properties of CaCu3Ti4.2O12 ceramics for X8R capacitors10.1016/j.ceramint.2018.04.156 ↗
9. Very high temperature stability and excellent dielectric properties of a novel X9R-type Ca1-xSrxCu3Ti4O12/TiO2 nanocomposite synthesized by a polymer pyrolysis technique10.1016/j.apsusc.2019.01.214 ↗
10. Microwave dielectric properties of CaCu3Ti4O12 ceramics: a clue to its intrinsic dielectric response10.1142/S2010135X23440010 ↗
11. Effect of calcium stoichiometry on the dielectric response of CaCu3Ti4O12 ceramics10.1016/j.jeurceramsoc.2011.12.019 ↗
12. High dielectric constant in ACu3Ti4O12 and ACuTi3FeO12 phases10.1006/jssc.2000.8703 ↗
13. Dielectric properties and impedance spectroscopy of Pb(Mg1/3Nb2/3)O3 ceramics prepared by ultrahigh pressure sintering
14. Temperature dependence of the aging effect of permittivity in Pb(Zn1/3Nb2/3)O3–PbTiO3 and BaTiO3 single crystals10.35848/1347-4065/acdf69 ↗
15. Enhanced dielectric and nonohmic properties of SrTiO3-modified CaCu3Ti4O12 ceramics10.1016/j.cap.2022.01.012 ↗
16. Investigation of nonlinearity in ZnO varistor ceramics based on defect characterization10.1007/s42341-023-00477-1 ↗
17. Exploring the dielectric and conduction characteristics of iodine substituted CaCu3Ti4O12-xIx10.1016/j.ceramint.2022.10.289 ↗
18. Origin of high dielectric performance in fine grain-sized CaCu3Ti4O12 materials10.1016/j.jeurceramsoc.2019.12.042 ↗
19. Dielectric properties and nonlinear I–V electrical behavior of (Ni2+, Zr4+) co-doping CaCu3Ti4O12 ceramics10.1007/s00339-018-2060-0 ↗
20. High nonlinearity and low leakage current SnO2 varistor ceramics by co-doping with yttrium and tantalum10.1016/j.matlet.2020.129120 ↗
21. CaCu3Ti4O12: one-step internal barrier layer capacitor10.1063/1.1463211 ↗
22. Tunable capacitor-varistor response of CaCu3Ti4O12/CaTiO3 ceramic composites with SnO2 addition10.1016/j.matchar.2020.110699 ↗
23. Nonintrinsic origin of the colossal dielectric constants in CaCu3Ti4O1210.1103/PhysRevB.70.172102 ↗
24. Extrinsic models for the dielectric response of CaCu3Ti4O1210.1063/1.1595708 ↗
25. Investigation on the growth of CaCu3Ti4O12 thin film and the origins of its dielectric relaxations10.1016/j.solidstatesciences.2011.10.012 ↗
26. Enhanced dielectric properties and grain boundary potentials in sulfur-doped CaCu3Ti4O12 thin films10.1016/j.jeurceramsoc.2020.01.052 ↗
27. Significantly enhanced varistor properties of CaCu3Ti4O12 based ceramics by designing superior grain boundary: deepening and broadening interface states10.1016/j.jmst.2021.07.057 ↗
28. Schottky-type grain boundaries in CCTO ceramics10.1016/j.ssc.2011.06.012 ↗
29. Carrier transport through grain boundaries in semiconductors10.1103/PhysRevB.33.3952 ↗
30. Colossal permittivity due to electron trapping behaviors at the edge of double Schottky barrier
31. Grain boundary effect on the dielectric properties of CaCu3Ti4O12 ceramics10.1088/0022-3727/38/11/022 ↗
32. Enhancement of dielectric and non-ohmic properties of graded Co doped CaCu3Ti4O12 thin films10.1016/j.jallcom.2019.152582 ↗
33. Enhanced electrical behavior in Ca1-xSrxCu3Ti4O12 ceramics10.1016/j.ceramint.2019.04.141 ↗
34. Significantly improving the giant dielectric properties of CaCu3Ti4O12 ceramics by co-doping with Sr2+ and F− ions10.1016/j.materresbull.2020.111043 ↗
35. Embedding nanostructure and colossal permittivity of TiO2-covered CCTO perovskite materials by a hydrothermal route10.1016/j.jallcom.2021.160948 ↗
36. Tuning electrical heterogeneity in CaCu3Ti4O12-ZnO ceramics for high dielectric and nonlinear properties10.1016/j.materresbull.2023.112276 ↗
37. Diffusion-reaction model of positron annihilation for complex defect pattern10.1088/1361-648X/ad1279 ↗
38. Tunable photoluminescence of CaCu3Ti4O12 based ceramics modified with tungsten10.1016/j.jallcom.2020.156652 ↗
39. Interface matters: design of an efficient CaCu3Ti4O12-rGO photocatalyst10.1016/j.powtec.2022.117478 ↗
40. Unveiling photoluminescent response of Ce-doped CaCu3Ti4O12: an experimental-theoretical approach10.1016/j.jallcom.2022.166185 ↗
41. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
42. TOPAS and TOPAS-Academic: an optimization program integrating computer algebra and crystallographic objects written in C++10.1107/S1600576718000183 ↗
43. Shape identification and particles size distribution from basic shape parameters using ImageJ10.1016/j.compag.2008.02.007 ↗
44. The CARNAÚBA X-ray nanospectroscopy beamline at the Sirius-LNLS synchrotron light source: developments, commissioning, and first science at the TARUMÃ station10.1016/j.elspec.2023.147340 ↗
45. A new version of LT program for positron lifetime spectra analysis10.4028/www.scientific.net/MSF.666.138 ↗
46. Tracking of structural defects induced by Eu-doping in β-Ag2MoO4: their influences on electrical properties10.1039/D3DT03385F ↗
47. Disclosing the nature of vacancy defects in α-Ag2WO410.1016/j.materresbull.2023.112252 ↗
48. Influence of degradation on the electrical conduction process in ZnO and SnO2-based varistors10.1063/1.3490208 ↗
49. Impedance spectroscopy analysis of SnO2 thick-films gas sensors10.1007/s10854-007-9517-9 ↗
50. The effects of dopants on the properties of metal oxides10.1016/S0167-2738(99)00312-4 ↗
51. Moulson · Electroceramics: materials, properties, applications · 2003 · 557
52. Effect of doping ions on the structural defect and the electrical behavior of CaCu3Ti4O12 ceramics10.1016/j.materresbull.2015.12.020 ↗
53. Effect of nickel substitution on electrical and microstructural properties of CaCu3Ti4O12 ceramic10.1016/j.jallcom.2016.12.096 ↗
54. Dielectric and non-ohmic analysis of Sr2+ influences on CaCu3Ti4O12-based ceramic composites10.1016/j.materresbull.2020.111071 ↗
55. Microstructural evolution and strongly enhanced dielectric response in Sn-doped CaCu3Ti4O12/CaTiO3 ceramic composites10.1016/j.materresbull.2016.01.031 ↗
56. Effects of Cu stoichiometry on the microstructures, barrier-layer structures, electrical conduction, dielectric responses, and stability of CaCu3Ti4O1210.1016/j.actamat.2006.02.037 ↗
57. Pinning effect of coherent particles on moving planar grain boundary: theoretical models and molecular dynamics simulations10.1016/j.mtla.2019.100225 ↗
58. Morphology characterisation of inclusions to predict the breakdown strength in electro-ceramic materials: microstructure modelling10.1016/j.ceramint.2018.09.175 ↗
59. Mixture behavior and microwave dielectric properties of (1−x)CaWO4–xTiO210.1016/j.jeurceramsoc.2006.11.035 ↗
60. Effect of NiO-doping on the microstructure and the dielectric properties of CaCu3Ti4O12 ceramics10.1016/j.ceramint.2014.01.119 ↗
61. Ca2+- substitution effect on the electronic structure of CaCu3Ti4O12 studied by electron spectroscopy for chemical analysis10.1016/j.ceramint.2020.10.138 ↗
62. Conduction and polarization mechanisms and trends in dielectric10.1109/MEI.2006.1705854 ↗
63. Origin of the temperature stability of dielectric constant in CaCu3Ti4O1210.1016/j.ceramint.2019.03.229 ↗
64. A new additive-free microwave dielectric ceramic system for LTCC applications: (1−x)CaWO4− x(Li0.5Sm0.5)WO410.1007/s10854-019-02791-y ↗
65. Crystal structures, dielectric properties, and lattice vibrational characteristics of (1-x)CaWO4- xTiO2 composite ceramics10.1016/j.ceramint.2019.10.092 ↗
66. Effects of BaCu(B2O5) on sintering characteristics and microwave dielectric properties of CaWO4 ceramics10.1016/j.ceramint.2014.03.028 ↗
67. Optimizing giant dielectric performance in CCTO ceramics through Cr and Zn co-doping10.1016/j.ceramint.2024.11.422 ↗
68. Synthesis and characterization of new doped dielectric materials based on CaCu3Ti4O12 (CCTO) applied at high temperature10.1016/j.jssc.2023.124506 ↗
69. Dielectric properties of CaCu3Ti4O12 ceramics doped by La3+10.1016/j.ceramint.2019.05.023 ↗
70. Modulus spectroscopy of grain–grain boundary binary system10.1016/j.physb.2014.12.001 ↗
71. Fine representation of dielectric properties by impedance spectroscopy10.1016/j.jallcom.2018.01.018 ↗
72. Strong nonlinear current-voltage behaviour in perovskite-derivative calcium copper titanate10.1038/nmat1238 ↗
73. Effect of aluminum substitution on structural, electronic and dielectric properties of cubic CaCu3Ti4O12 ceramics: a first-principles study10.1016/j.jpcs.2022.110617 ↗
74. Structural and electrical properties of Zn1-xNixFe2O4 ferrite10.1016/j.physb.2015.03.019 ↗
75. Impedance spectroscopy: theory, experiment, and applications
76. Impedance study of giant dielectric permittivity in BaFe0.5Nb0.5O3 perovskite ceramic10.1016/j.cap.2009.04.006 ↗
77. Electrical behavior analysis of n-type CaCu3Ti4O12 thick films exposed to different atmospheres10.1016/j.jeurceramsoc.2014.08.041 ↗
78. Electrical behavior of BaSnO3 bulk samples formed by slip casting: effect of synthesis methods used for obtaining the ceramic powders10.1016/j.materresbull.2016.02.037 ↗
79. Bi-objective integrating sustainable order allocation and sustainable supply chain network strategic design with stochastic demand using a novel robust hybrid multi-objective metaheuristic10.1016/j.cor.2014.12.014 ↗
80. Improvement in varistor properties of CaCu3Ti4O12 ceramics by chromium addition10.1016/j.jmst.2019.08.055 ↗
81. Effect of thermal history on structural, microstructural properties and J – E characteristics of CaCu3Ti4O12 polycrystalline ceramic10.1016/j.matchemphys.2018.03.041 ↗
82. The physics of metal oxide varistors10.1063/1.321701 ↗
83. Voltage–Current nonlinearity of CaCu3Ti4O12 ceramics10.1111/j.1551-2916.2011.05025.x ↗
84. Giant dielectric response, electrical properties and nonlinear current-voltage characteristic of Al2O3-CaCu3Ti4O12 nanocomposites10.1016/j.apsusc.2019.01.136 ↗
85. Grain size effect on the dielectric and non-ohmic properties of CaCu3Ti4O12 ceramics prepared by the sol-gel process10.1016/j.jallcom.2018.11.200 ↗
86. A low leakage current (Co, Mn, Ta)-SnO2 varistor tailored by doping with chromium for power grids10.1016/j.rinp.2020.103314 ↗
87. Non-stoichiometry influence on dielectric properties of CaCu3Ti4O12 based ceramics10.1016/j.mseb.2023.117095 ↗
88. Dielectric properties of CaCu3Ti4O12 ceramics doped with aluminium and fluorine10.1016/j.jallcom.2021.159861 ↗
89. High dielectric performance of (Nb5+, Lu3+) co-doped TiO2 ceramics in a broad temperature range10.1016/j.matlet.2020.127838 ↗
90. Good dielectric performance and broadband dielectric polarization in Ag, Nb co-doped TiO210.1111/jace.17660 ↗
91. A novel strategy to improve the thermal stability of dielectric properties and reduce the dielectric loss tangent of Ca1-1.5xPrxCu3Ti4O12/TiO2 ceramics10.1016/j.ceramint.2019.04.199 ↗
92. Less temperature-dependent high dielectric and energy-storage properties of eco-friendly BiFeO3–BaTiO3-based ceramics10.1016/j.jallcom.2019.152878 ↗
93. Improved non-ohmic and dielectric properties of Cr3+ doped CaCu3Ti4O12 ceramics prepared by a polymer pyrolysis solution route10.1016/j.jeurceramsoc.2018.07.047 ↗
94. Liquid phase sintering of SnO2 varistors for stability improvement10.1016/j.matchemphys.2023.127967 ↗
95. The effect of doping Bi2O3 on sintering temperature, microstructure, electrical nonlinearity and stability of high-voltage SnO2 varistors
96. Effect of Mn on the ZnBiMnO varistor ceramics sintered at a low-temperature of 875 C10.1016/j.ceramint.2023.12.071 ↗
97. Influence of Ca-doping on the nonlinear properties of novel ZnO-Cr2O3-based varistor ceramics10.1016/j.jeurceramsoc.2021.12.064 ↗
98. An engineering design based on nano/micro-sized composite for CaTiO3/CaCu3Ti4O12 materials and its dielectric and non-ohmic properties10.1016/j.ceramint.2019.07.166 ↗
99. Microstructure and nonlinear electrical properties in Na2CO3-ZnO varistor ceramics10.1016/j.mseb.2023.117084 ↗
100. Effect of Co3O4-doping on the microstructure and electrical properties of novel ZnO–Cr2O3-based varistor ceramics10.1016/j.mssp.2023.107570 ↗