Performance investigation of experimentally fabricated lead iodide perovskite solar cell via numerical analysis

[EN] A fabricated perovskite solar cell structure Spiro- OMeTAD/MAPbI(3)/TiO(2 )showing a maximum efficiency of 14.7%, employing a cost-effective single-step spin-coating method, with controlled humidity of 35% under ambient conditions, is reported. In the same controlled conditions, eight set of devices with the same structure sequence were fabricated with distinctive performance parameters varying from 10.14% to 14.7%. All devices were fabricated under the same operating conditions and in a controlled humidity environment. To further augment the device performance, the photovoltaic parameters were numerically calculated and equated with experimental values. A detailed analysis was conducted to propose a novel efficient device structure having efficiency of 27.13%. Results were obtained through a stepwise procedure by performing numerical analysis on the experimentally fabricated device. The experimental findings were first replicated in solar cell capacitance simulator software, and validation was carried out by fitting the JV curve of a best fabricated device under the influence of distinct factors such as the active layer and the interface defects. Different compound materials were also applied as an alternative HTL as a substitute of Spiro OMeTAD in a primary optimized device. Detailed analysis gives CZTSe kesterite as most suitable HTL layer for the lead iodide-based perovskite device. Finally, the appropriate band offset engineering was applied to select the electron transport layer, and the best novel structure CZTSe/MAPbI(3)/Cd1-xZnxS/FTO was proposed, which can be easily and economically manufactured. The functional parameters taken by the proposed device configuration were PCE, FF, J(sc) and V-oc set as 27.13%, 88.90%, 26.45mA/cm(2), and 1.12 V respectively. The presented concepts and guidelines will perform a significant role and will categorically project feasible fabrication approaches for economical and efficient devices.