Enhanced electrical properties in low-temperature sintering PNN – PMW –PZT ceramics by Yb2O3 doping
Source abstract
Abstract
Abstract Low-temperature (900°C) sintering PNN – PMW –PZT ceramics were prepared via the solid-state reaction method. The samples added with different Yb2O3 contents were compared in terms of the phase structure, microstructure, dielectric properties, piezoelectric properties, and ferroelectric properties. The tetragonal and rhombohedral phases coexist in the samples. The tetragonal phase content (TPC) first increases and then decreases as the Yb2O3 doping content increases. The Yb2O3 doping can enhance the electrical properties of the samples. The ceramics without Yb2O3 only have a d33 of 322 pC/N, while the ceramics doped with 0.10 mol% Yb2O3 have the largest tetragonal phase content and the largest d33 of 623 pC/N. The relationship between the Yb2O3-doping and electrical properties was also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Effect of MnO2 doping on piezoelectric, dielectric and ferroelectric properties of PNN–PZT ceramics10.1016/j.ceramint.2015.05.094 ↗
2. Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: effect of mechanical load and temperature10.1016/j.jeurceramsoc.2009.08.013 ↗
3. Enhanced electrical properties of co-firing 0.7Pb(Zr0.46Ti0.54)O3–0.1Pb(Zn1/3Nb2/3)O3–0.2Pb(Ni1/3Nb2/3)O3 multilayer thick films prepared by screen-printing method10.1016/j.matlet.2015.06.077 ↗
4. Achieving both high d33 and high TC in low-temperature sintering Pb(Ni1/3Nb2/3)O3–Pb(Mg1/2W1/2)O3–Pb(Zr0.5Ti0.5)O3 ceramics using Li2CO310.1016/j.materresbull.2016.08.010 ↗
5. Phase structure–electrical property relationships in Pb(Ni1/3Nb2/3)O3 – Pb(Zr,Ti)O3-based ceramics10.1063/1.4945108 ↗
6. Influence of sintering temperature on phase structure and electrical properties of 0.55Pb(Ni1/3Nb2/3)O3–0.45Pb(Zr0.3Ti0.7)O3 ceramics10.1016/j.materresbull.2017.04.015 ↗
7. Effects of Li2CO3 and Sm2O3 additives on low-temperature sintering and piezoelectric properties of PZN–PZT ceramics10.1016/j.jeurceramsoc.2013.07.028 ↗
8. Low temperature sintering and piezoelectric properties of 0.6Pb(Zr1-xTix)O3–0.4Pb(Zn1/6Ni1/6Nb1/3)O3 ceramics10.1007/s10832-014-9918-0 ↗
9. High-power properties of piezoelectric hard materials sintered at low temperature for multilayer ceramic actuators10.1016/j.jeurceramsoc.2013.02.014 ↗
10. Low-temperature sintering and piezoelectric properties of 0.65Pb(Zr1-xTix)O3–0.35Pb(Ni0.33Nb0.67)O3 ceramics10.1111/j.1551-2916.2011.04538.x ↗
11. Low-temperature sintered Pb(Zr,Ti)O3–Pb(Mn,Sb)O3–Pb(Zn,Nb)O3 for multilayer ceramic actuators10.1143/JJAP.49.071503 ↗
12. Piezoelectric properties of MnO2 doped low temperature sintering Pb(Mn1/3Nb2/3)O3–Pb(Ni1/3Nb2/3)O3–Pb(Zr0.50Ti0.50)O3 ceramics10.1007/s10832-008-9483-5 ↗
13. Influence of spark plasma sintering temperature on piezoelectric properties of PZT-PMnN piezoelectric ceramics
14. Impedance spectroscopy and piezoelectric property of LiF-doped PZN–PZT low-temperature sintering piezoelectric ceramics
15. Structural and piezoelectric properties of <001>textured PZT–PZNN piezoelectric ceramics10.1111/jace.15113 ↗
16. Properties of [Pb(Zn1/3Nb2/3)O3]x- [Pb(Zr0.48Ti0.52)O3](1-x) ceramics with low sintering temperature and their 1-3 piezocomposites10.1109/TUFFC.2016.2554319 ↗
17. Material and device design for the high performance low temperature co-fired multilayer piezoelectric transformer10.1016/j.sna.2018.12.017 ↗
18. The influence of Yb and Nd substituents on high-power piezoelectric properties of PMS–PZT ceramics10.1016/j.ceramint.2007.08.008 ↗
19. Effect of Yb addition on the sintering behavior and high power piezoelectric properties of Pb(Zr,Ti)O3–Pb(Mn,Nb)O310.1143/JJAP.42.1307 ↗
20. Time dependence of the mechanical quality factor in “hard” lead zirconate titanate ceramics: development of an internal dipolar field and high power origin10.1143/JJAP.45.9119 ↗
21. Phase evolution and relaxor behavior of BiScO3–PbTiO3–0.05Pb(Yb1/2Nb1/2)O3 ternary ceramics10.1007/s10853-019-03851-8 ↗
22. Fabrication and properties of PYN–PMN–PZT quaternary piezoelectric ceramics for high-power, high-temperature applications10.1016/j.matlet.2009.12.020 ↗
23. Relaxor behavior of piezoelectric Pb(Yb1/2Nb1/2)O3–PbTiO3 ceramics sintered at low temperature10.1007/s10832-011-9629-8 ↗
24. Effect of Pb(Yb1/2Nb1/2)O3 on structural and piezoelectric properties of Pb(Zr0.52Ti0.48)O3 ceramics10.1063/1.1288222 ↗
25. Processing and electrical properties of 0.5Pb(Yb1/2Nb1/2)O3–0.5PbTiO3 ceramics10.1023/A:1024080008850 ↗
26. Comparative study of microstructure, electric properties and conductivity for NiO and PNN modified Pb(Zn1/3Nb2/3)O3–PbZrO3–PbTiO3 ceramics10.1016/j.materresbull.2013.12.061 ↗
27. The phase structure, electrical properties, and correlated characterizations of (Mn,Sb) co-tuned PZMnNS–PZT ceramics with relaxation behavior near the morphotropic phase boundary10.1016/j.ceramint.2014.03.185 ↗
28. Effect of simultaneous addition of BiFeO3 and Ba (Cu0.5W0.5)O3 on lowering of sintering temperature of Pb(Zr,Ti)O3 ceramics10.1111/j.1151-2916.1998.tb02439.x ↗
29. Coarsening of Mo grains in the molten NiFe matrix of a low volume fraction10.1016/0001-6160(85)90146-4 ↗
30. Grain boundary migration with precipitation and dissolution of a liquid phase in MoNi alloy10.1016/0956-7151(93)90177-T ↗
31. A mechanism for low-temperature sintering10.1016/j.jeurceramsoc.2005.06.026 ↗
32. High piezoelectric d31 coefficient and high Tc in PMW-PNN-PZT ceramics sintered at low temperature10.1016/j.sna.2016.12.020 ↗
33. Effect of CoO additive on structure and electrical properties of (Na0.5Bi0.5)0.93Ba0.07TiO3 ceramics prepared by the citrate method10.1016/j.actamat.2007.10.014 ↗
34. Effect of valence state and incorporation site of cobalt dopants on the microstructure and electrical properties of 0.2PZN–0.8PZT ceramics10.1016/j.actamat.2012.11.026 ↗
35. Effects of ZnO on the dielectric, conductive and piezoelectric properties of low-temperature-sintered PMnN-PZT based hard piezoelectric ceramics10.1016/j.jeurceramsoc.2011.04.022 ↗
36. Low-temperature sintering and enhanced piezoelectric properties of random and textured PIN–PMN–PT ceramics with Li2CO310.1111/jace.14657 ↗
37. Eu and Yb substituent effects on the properties of Pb(Zr0.52Ti0.48)O3–Pb(Mn1/3Sb2/3)O3 ceramics10.1143/JJAP.40.687 ↗
38. Microstructure and ferroelectric properties of MnO2-doped bismuth-layer (Ca,Sr)Bi4Ti4O15 ceramics10.1063/1.2058174 ↗
39. Properties of (1–x)PZT–xSKN ceramics sintered at low temperature using Li2CO310.1111/j.1551-2916.2008.02403.x ↗
40. MnO2-doped (Ca0.4,Sr0.6)Bi4Ti4O15 high-temperature piezoelectric ceramics with improved thermal stability10.1007/s10853-016-9813-y ↗
41. Piezoelectric properties of Pb(Ni1/3,Sb2/3)O3–PbTiO3–PbZrO3 ceramics modified with MnO2 additive10.1016/j.jeurceramsoc.2005.03.075 ↗
42. High antiferroelectric stability and large electric field-induced strain in MnO2-doped Pb0.97La0.02(Zr0.63Sn0.26Ti0.11)O3 ceramics10.1177/1045389X13498319 ↗
43. Origin of high piezoelectricity in low-temperature sintering PZT-based relaxor ferroelectric ceramics10.1016/j.jallcom.2020.157930 ↗