Comparison of Electromagnetic Shielding with Polyaniline Nanopowders Produced in Solvent-Limited Conditions

Nanoparticle synthesis (~10-50 nm) of HCl-doped polyaniline elucidates the impact of limiting solvent (water) and oxidizing agent (ammonium peroxydisulfate) on morphology (XRD and TEM), chemical structure (FTIR), conductivity (two-point DC) and electromagnetic shielding effectiveness (SE) in microwave frequencies (i.e., X-band S-parameter measurements). Detailed comparison of these properties with respect to three distinct polymerization environments indicate that a solvent-free or limited solvent polymerization accomplished through a wet grinding solid-phase reaction produces superior conductivity (27 S/cm) with intermediate crystallinity (66%) for the highest EM shielding-an order of magnitude improvement over conventional polymerization with respect to EM power transmission reduction for all loadings per shielding area (0.04 to 0.17 g/cm(2)). By contrast, the classic oxidation of aniline in a well-dispersed aqueous reaction phase with an abundance of available oxidant in free solution yielded low conductivity (3.3 S/cm), crystallinity (54%), and SE, whereas similar solvent-rich reactions with limiting oxidizer produced similar conductivity (2.9 S/cm) and significantly lower SE with the highest crystallinity (72%). This work is the first to demonstrate that limiting solvent and oxidizer enhances electromagnetic interactions for shielding microwaves in polyaniline nanopowders. This appears connected to having the highest overall extent of oxidation achieved in the wet solid-phase reaction.