A Flexible and High-Efficient Anti-Icing/Deicing Coating Based on Carbon Nanomaterials

Anti-icing/deicing coatings with low energy consumption and superior flexibility could better fit application requirements in practical engineering. In this paper, an active–passive-integrated anti-icing/deicing coating based on carbon nanomaterials is prepared, which not only possesses various functions of electrothermal conversion, photothermal conversion, and superhydrophobicity but also shows a large deformability to accommodate curved surfaces. The coating consists of a sandwich-structured bottom part and top layer, the former of which includes a core conductive layer made of densely mixed carbon nanotubes (CNTs) and graphene and two polydimethylsiloxane (PDMS) wrapping layers, while the latter is a polymeric composite filled with TiN and SiO 2 nanoparticles. Experimental studies show that, when the present coating works under an electric field alone, a 90% conversion of electric energy to thermal energy can be realized, only a 2 V voltage is enough to unfreeze the surface at minus 20 degrees within 400 s, and a slightly larger voltage of 2.5 V leads to a significant temperature increase of more than 100 °C within 200 s. Such required voltages are significantly smaller than their counterparts in existing electrothermal-based methods to achieve the same heating effects, which could be further diminished with the auxiliary action of sunlight illumination. A fast and complete deicing/defrosting can be consequently achieved with a small energy input. Furthermore, the water repellency function, electric property, and electrothermal conversion performance of the coating remain almost unchanged after either a large bending deformation or many bending cycles, thus ensuring an outstanding anti-icing/deicing effect on both flat and curved surfaces. All of the results demonstrate apparent advantages of the present coating including high efficiency, low energy consumption, all-weather adaptability, and excellent flexibility, which should be of great practical value for the freeze protection of differently shaped industrial equipment.