Ice Adhesion Properties on Micropillared Superhydrophobic Surfaces

In this work, we investigate the freezing behavior and ice adhesion properties of sessile drops on micropillared superhydrophobic surfaces (SHSs) with various sizes, which are of practical importance for anti/deicing. First of all, it is demonstrated that the recalescence is related only to the supercooling degree of drops but not to the geometrical parameters of micropillars. The freezing time of sessile drops first increases and then decreases with the area fraction of the SHSs, which demonstrates the nonmonotonic dependence of the icing time on the area fraction. Moreover, the influence of the geometrical parameters of the micropillars on the ice adhesion is discussed. With the decrease of the substrate temperature, the wetting state of the adhesive ice can be transformed from the Cassie ice to the Wenzel ice. For the Cassie ice, the adhesive force is proportional to the area fraction of the SHSs. Interestingly, experimental results show that there exist two interfacial debonding modes of the Wenzel ice: translational debonding and rotational debonding. Furthermore, it is found that the rotational debonding mode contributes to a much lower adhesive force between the ice and the micropillared surface compared to that of the translational debonding mode. By analyzing the critical interfacial energy release rate of the two modes, we deduce the threshold between the two modes, which is quantified as the geometrical parameters of the micropillars. In addition, quantitative relations between the geometrical parameters and the adhesion strengths of the two modes are also obtained. We envision that this work would shed new light on the design optimization of anti/deicing materials.