journal article·2022-06Open access

Fabrication of 3D metallic glass architectures by a mold-strain-set method

Yupeng Wu, Yongping Kang, Yiling Xie, Xiaojian Xiang, Langquan Shui, Jan Schroers, Ze Liu

Materials & Design· Volume 218

Abstract

Metallic glasses (MGs) are considered as promising materials for microelectromechanical systems (MEMS) due to their excellent mechanical properties combined with unique net shape formability. However, the prevalent fabrication of MG MEMS is based on semiconductor micro-manufacturing technology which is limited to 2D. This work introduces a mechanically guided manufacturing method which enables facile fabrication of free-standing 3D MG structures with predictable complex and high-aspect-ratio configuration. As examples, 3D MG architectures with out-of-plane aspect ratio up to three and MG microhelices arrays are fabricated. Most critically, we show the prepared architectures exhibit super-elasticity. Such unprecedented elasticity originates from the near-ideal elastic limit of MGs, combining with geometric optimization. Finally, we demonstrate that the microstructure of the MG 3D architectures can be tuned over a wide range, which is desirable in a wide range of applications such as sensing and energy harvesting devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Surface Roughness and Optical Measurements · Photonic Crystals and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. A universal criterion for plastic yielding of metallic glasses with a (T/T g) 2/3 temperature dependence10.1103/PhysRevLett.95.195501 ↗
2. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
3. Effect of addition of Be on glass-forming ability, plasticity and structural change in Cu–Zr bulk metallic glasses10.1016/j.actamat.2008.02.044 ↗
4. Corrosion and related mechanical properties of bulk metallic glasses10.1557/jmr.2007.0051 ↗
5. Wear resistivity of super-precision microgear made of Ni-based metallic glass10.1016/j.msea.2006.02.300 ↗
6. The fracture of bulk metallic glasses10.1016/j.pmatsci.2015.05.002 ↗
7. Bulk metallic glass: the smaller the better10.1002/adma.201002148 ↗
8. Approaching the ideal elastic limit of metallic glasses10.1038/ncomms1619 ↗
9. Effect of ion irradiation on tensile ductility, strength and fictive temperature in metallic glass nanowires10.1016/j.actamat.2014.04.002 ↗
10. Thermoplastic blow molding of metals10.1016/S1369-7021(11)70018-9 ↗
11. Thermoplastic extrusion of bulk metallic glass10.1016/j.scriptamat.2009.02.052 ↗
12. Nanomoulding with amorphous metals10.1038/nature07718 ↗
13. Processing of bulk metallic glass10.1002/adma.200902776 ↗
14. Thermoplastic micro-forming of bulk metallic glasses: a review10.1007/s11837-016-1844-y ↗
15. Thermoplastic forming of bulk metallic glass—a technology for MEMS and microstructure fabrication10.1109/JMEMS.0007.892889 ↗
16. Recent advances in metallic glass nanostructures: synthesis strategies and electrocatalytic applications10.1002/adma.201802120 ↗
17. Atomically smooth surfaces through thermoplastic forming of metallic glass10.1063/1.3485298 ↗
18. A criterion of ideal thermoplastic forming ability for metallic glasses10.1016/j.scriptamat.2020.06.021 ↗
19. 2008
20. Bulk metallic glass micro fuel cell10.1002/smll.201201647 ↗
21. Thermoplastic forming of bulk metallic glass - A technology for MEMS and microstructure fabrication10.1109/JMEMS.0007.892889 ↗
22. Metallic glass hemispherical shell resonators10.1109/JMEMS.2014.2363581 ↗
23. Fabrication and nano-imprintabilities of Zr-, Pd- and Cu-based glassy alloy thin films10.1088/0957-4484/22/10/105302 ↗
24. 3D metallic glass cellular structures10.1016/j.actamat.2015.11.057 ↗
25. Surface tension-powered self-assembly of microstructures-the state-of-the-art10.1109/JMEMS.2003.811724 ↗
26. Silicon micro-machines for fun and profit10.1007/s10909-012-0654-z ↗
27. Metallic glass as a mechanical material for microscanners10.1002/adfm.201502456 ↗
28. New bulk metallic glasses for applications as magnetic-sensing, chemical, and structural materials10.1557/mrs2007.128 ↗
29. Bulk Metallic Glasses: At the Cutting Edge of Metals Research10.1557/mrs2007.121 ↗
30. Fabrication of thin film metallic glass and its application to microactuators
31. Semiconductor nanomembrane tubes: three-dimensional confinement for controlled neurite outgrowth10.1021/nn103618d ↗
32. Three-dimensional mesostructures as high-temperature growth templates, electronic cellular scaffolds, and self-propelled microrobots10.1073/pnas.1713805114 ↗
33. Deterministic integration of biological and soft materials onto 3D microscale cellular frameworks10.1002/adbi.201700068 ↗
34. Ductile Bulk Metallic Glass Foams10.1002/adma.200400897 ↗
35. Origami lithium-ion batteries10.1038/ncomms4140 ↗
36. 3D porous sponge-inspired electrode for stretchable lithium-ion batteries10.1002/adma.201505299 ↗
37. Topology-optimized bulk metallic glass cellular materials for energy absorption10.1016/j.scriptamat.2021.114361 ↗
38. Two-dimensional materials in functional three-dimensional architectures with applications in photodetection and imaging10.1038/s41467-018-03870-0 ↗
39. Digital cameras with designs inspired by the arthropod eye10.1038/nature12083 ↗
40. 25th anniversary article: Ordered polymer structures for the engineering of photons and phonons10.1002/adma.201303456 ↗
41. Nanofabrication approaches for functional three-dimensional architectures10.1016/j.nantod.2019.100825 ↗
42. Direct 2D-to-3D transformation of pen drawings10.1126/sciadv.abf3804 ↗
43. Processing metallic glasses by selective laser melting10.1016/j.mattod.2013.01.018 ↗
44. 3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness10.1016/j.matdes.2018.01.061 ↗
45. Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study10.1016/j.matdes.2015.07.145 ↗
46. 3D printing metals like thermoplastics: Fused filament fabrication of metallic glasses10.1016/j.mattod.2018.07.001 ↗
47. Concurrent formation of metallic glass during laser forward transfer 3D printing10.1002/adfm.202001260 ↗
48. Glass blowing on a wafer level10.1109/JMEMS.2007.892887 ↗
49. Three-Dimensional Shell Fabrication Using Blow Molding of Bulk Metallic Glass10.1109/JMEMS.2010.2090495 ↗
50. Assembly of micro/nanomaterials into complex, three-dimensional architectures by compressive buckling10.1126/science.1260960 ↗
51. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗