Time-effective synthesis of rhombohedral CuAlO2 from mesoporous alumina substrate
Source abstract
Abstract
Abstract The development of p-type transparent semiconductors with large optical bandgaps and high electrical conductivity is needed for a wide range of applications in optoelectronics and solar cell technologies. The experimental techniques currently used are limited to complex procedures and time consuming processing. In this work, we propose a versatile, simple and reproducible method of rapid reactive dip-coating using a mesoporous network of highly aligned γ-alumina nanofibers for synthesis of delafossite CuAlO2 by a time-effective process of 2 h duration. The rhombohedral CuAlO2 was densified with the help of spark plasma sintering in vacuum. Electrical conductivity improves with increase in annealing temperature while its room temperature value for a sample annealed at 1100 °C was 0.07 S m−1 measured with four-probe method. Direct optical bandgap of 3.79 eV was estimated with the help of diffuse reflection data for the sample sintered at optimal temperature. Both Seebeck coefficient and Hall measurements confirmed the p-type conductivity of the material. Novelty The major number of CuAlO2 synthesis approaches require complex instrumentation, templating, and long processing time. Therefore, scalable and cost-effective production of CuAlO2 remains a challenge. Herein, we report a rapid synthesis of CuAlO2, in a straightforward and scalable approach, which reduces the processing cost and overal energy consumption of the process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Nanomaterials for catalytic reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Recent progress in transparent oxide semiconductors: materials and device application10.1016/j.tsf.2006.12.125 ↗
2. p-Type electrical conduction in transparent thin films of CuAlO210.1038/40087 ↗
3. Luminescence of delafossite-type CuAlO2 fibers with Eu substitution for Al cations10.1080/14686996.2016.1172024 ↗
4. Reinvestigation thermoelectric properties of CuAlO210.1016/j.egypro.2014.07.132 ↗
5. Fabrication of bipolar CuInO2 with delafossite structure10.1016/S0022-3697(03)00071-4 ↗
6. N-type electrical conduction in transparent thin films of delafossite-type AgInO210.1063/1.120957 ↗
7. p-Type transparent conducting oxides10.1088/0953-8984/28/38/383002 ↗
8. Transparent conducting p-type NiO thin films prepared by magnetron sputtering10.1016/0040-6090(93)90636-4 ↗
9. p-Type conductivity in CuCr1−xMgxO2 films and powders10.1063/1.1372636 ↗
10. Structural optical and electrical transport properties of ALD-fabricated CuCrO2 films10.1016/j.phpro.2015.12.061 ↗
11. Electronic structure and optoelectronic properties of transparent p-type conducting CuAlO210.1063/1.1308103 ↗
12. Synthesis and characterization of p-type transparent conducting CuAlO2 thin film by DC sputtering10.1016/S0040-6090(03)00817-4 ↗
13. SrCu2O2: a p-type conductive oxide with wide band gap10.1063/1.121761 ↗
14. Bipolarity in electrical conduction of transparent oxide semiconductor CuInO2 with delafossite structure10.1063/1.1355673 ↗
15. Synthesis of CuAlO2 nanofibrous mats by electrospinning10.1016/j.matchemphys.2009.05.009 ↗
16. Synthesis of delafossite CuAlO2 p-type semiconductor with a nanoparticle-based Cu(I) acetate-loaded boehmite precursor10.1016/j.materresbull.2011.07.047 ↗
17. Scalable synthesis of delafossite CuAlO2 nanoparticles for p-type dye-sensitized solar cells applications10.1016/j.jallcom.2013.12.199 ↗
18. Coupled thermal analysis of novel alumina nanofibers with ultrahigh aspect ratio10.1016/j.tca.2013.10.010 ↗
19. CuAlO2 thermoelectric compacts by SPS and thermoelectric performance improvement by orientation control10.1016/j.ceramint.2017.06.073 ↗
20. Fabrication of thermoelectric CuAlO2 and performance enhancement by high density10.1016/j.jallcom.2015.08.013 ↗
21. An experimental setup for the simultaneous measurement of thermoelectric power of two samples from 77K to 500K10.1063/1.4891631 ↗
22. Delafossite-CuAlO2 films prepared by annealing of amorphous Cu-Al-O films at high temperature under controlled atmosphere10.1016/j.tsf.2011.03.041 ↗
23. The interaction between CuO and Al2O3 and the reactivity of copper aluminates below 1000°C and their implication on the use of the Cu–Al–O system for oxygen storage and production10.1039/C6RA22712K ↗
24. Novel interpenetrating Cu–Al2O3 structures by controlled reduction of bulk CuAlO210.1007/s10853-014-8744-8 ↗
25. Thermodynamics of CuAlO2 and CuAl2O4 and phase equilibria in the system Cu2O-CuO-Al2O310.1111/j.1151-2916.1975.tb11441.x ↗
26. Thermal decomposition of Cu(NO3)2∗3H2O at reduced pressures10.1016/S0040-6031(03)00057-1 ↗
27. Thermal decomposition of hydrated copper nitrate on activated carbon fibers
28. Synthesis and characterization of CuAlO2 and AgAlO2 delafossite oxides through low-temperature hydrothermal methods10.1021/ic500090g ↗
29. Rapid synthesis and electrical transition in p-type delafossite CuAlO210.1039/C4TC01349B ↗
30. Synthesis of Cu2O from CuO thin films: optical and electrical properties10.1063/1.4919323 ↗
31. Sol–gel synthesis and characterization of the delafossite CuAlO210.1007/s10971-015-3737-x ↗
32. Wolpert · 2012
33. Identification and design principles of low hole effective mass p-type transparent conducting oxides10.1038/ncomms3292 ↗
34. Wang · 2004
35. Band-gap energy estimation from diffuse reflectance measurements on sol–gel and commercial TiO2: a comparative study10.1007/s10971-011-2582-9 ↗
36. Robertson · 2011