Ultrahigh Elastic Polymer Electrolytes for Solid-State Lithium Batteries with Robust Interfaces
Source abstract
Abstract
Solid polymer electrolytes (SPEs) are promising for solid-state lithium batteries, but their practical application is significantly impeded by their low ionic conductivity and poor compatibility. Here, we report an ultrahigh elastic SPE based on cross-linked polyurethane (PU), succinonitrile (SN), and lithium bistrifluoromethanesulfonimide (LiTFSI). The resulting electrolyte (PU-SN-LiTFSI) exhibits an ionic conductivity of 2.86 × 10–4 S cm–1, a tensile strength of 3.8 MPa, and a breaking elongation exceeding 3000% at room temperature. A solid-state lithium battery using the electrolyte exhibits a high specific capacity of 150 mAh g–1 at 0.2C and a long cycling life of up to 700 cycles at 0.5C at room temperature, showing one of the best performances among its counterparts. The excellent performances are attributed to the fact that its ultrahigh elasticity, good ionic conductivity, tensile strength, and electrochemical stability contribute to robust electrode/electrolyte interfaces, thus greatly decreasing the charge-transfer resistance in charge/discharge processes. Our investigations provide a novel strategy to address the intrinsic interfacial issue of solid-state batteries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China
Funding
China Postdoctoral Science Foundation · State Key Laboratory of Robotics and System · National Natural Science Foundation of China · Foundation Enhancement Program Technical Field Fund Projects
References (36)
Show source-provided references
1. 10.1002/advs.20200330110.1002/advs.202003301 ↗
2. 10.1016/j.ensm.2019.05.02310.1016/j.ensm.2019.05.023 ↗
3. 10.1002/adfm.20200144410.1002/adfm.202001444 ↗
4. 10.1038/natrevmats.2016.10310.1038/natrevmats.2016.103 ↗
5. 10.1039/D0SE01065K10.1039/D0SE01065K ↗
6. 10.3389/fchem.2019.0052210.3389/fchem.2019.00522 ↗
7. 10.1002/aenm.20200080210.1002/aenm.202000802 ↗
8. 10.1016/j.chempr.2019.05.00910.1016/j.chempr.2019.05.009 ↗
9. 10.1021/acsami.9b2012810.1021/acsami.9b20128 ↗
10. 10.1039/D0TA02098B10.1039/D0TA02098B ↗
11. 10.1149/1945-7111/ab7c7210.1149/1945-7111/ab7c72 ↗
12. 10.1080/15421406.2020.172388910.1080/15421406.2020.1723889 ↗
13. 10.1016/j.ceramint.2020.01.17010.1016/j.ceramint.2020.01.170 ↗
14. 10.1016/j.ssi.2020.11543710.1016/j.ssi.2020.115437 ↗
15. 10.1016/j.cej.2019.12366510.1016/j.cej.2019.123665 ↗
16. 10.1073/pnas.170848911410.1073/pnas.1708489114 ↗
17. 10.1016/j.ensm.2019.11.01810.1016/j.ensm.2019.11.018 ↗
18. 10.1016/j.cej.2020.12675410.1016/j.cej.2020.126754 ↗
19. 10.1016/j.memsci.2020.11901810.1016/j.memsci.2020.119018 ↗
20. 10.1002/adfm.20200717210.1002/adfm.202007172 ↗
21. 10.1002/advs.20190103610.1002/advs.201901036 ↗
22. 10.1038/s41578-021-00320-010.1038/s41578-021-00320-0 ↗
23. 10.1002/adma.20200072110.1002/adma.202000721 ↗
24. 10.1002/aenm.20190337610.1002/aenm.201903376 ↗
25. 10.1002/adma.20200039910.1002/adma.202000399 ↗
26. 10.1002/open.20200010710.1002/open.202000107 ↗
27. 10.1002/smm2.100710.1002/smm2.1007 ↗
28. 10.1016/j.jechem.2019.09.03410.1016/j.jechem.2019.09.034 ↗
29. 10.3390/polym1206132410.3390/polym12061324 ↗
30. 10.1021/acsaem.0c0187210.1021/acsaem.0c01872 ↗
31. 10.1016/j.jelechem.2020.11415610.1016/j.jelechem.2020.114156 ↗
32. 10.1002/advs.20200337010.1002/advs.202003370 ↗
33. 10.1016/j.ensm.2020.07.03710.1016/j.ensm.2020.07.037 ↗
34. 10.1021/acsaem.0c0201810.1021/acsaem.0c02018 ↗
35. 10.1016/j.electacta.2017.04.13210.1016/j.electacta.2017.04.132 ↗
36. 10.1002/aenm.20200245510.1002/aenm.202002455 ↗