journal article·2026-08Open access

Electrodeposition growth of multiphase metal telluride thin films: Structural, optical, electrical properties, and DFT calculations

Panupat Chaiworn, Pensri Pramukkul, Prayoonsak Pluengphon, Ekasiddh Wongrat, Phathaitep Raksa, Piyanooch Nedkun, Auttasit Tubtimtae

Abstract

This study investigated the effects of applied electrodeposition potentials on the structural, optical, and electrical properties of multiphase metal telluride thin films for optoelectronic applications. The rhombohedral Sb 2 Te 3 , Bi 2 Te 3 , Al 7 Te 10 , and Bi 4 Te 3 phases were identified and incorporated into thin films containing hexagonal Bi 2 Te, BiTe, and monoclinic Al 2 Te 3 . Variations in the crystallographic parameters are attributed to recrystallization and phase transformation processes driven by the energy stored in the parent Bi 2 Te 3 phase. Scanning electron microscopy (SEM ) images showed a compact inner surface covered with residuals dispersed across the film surface at the applied potentials of 4 and 6 V. At an applied potential of 8 V, crack formation accompanied by a reduction in surface residuals was observed, whereas films deposited at 10 V exhibited more pronounced cracking with no noticeable residuals. Energy-dispersive X-ray spectroscopy ( EDS ) confirmed the presence of Al, Sb, Te, and Bi in all the deposited films, indicating the successful incorporation of binary multiphase metal chalcogenide compounds. The band gaps of the deposited films are decreased with increasing electrodeposition potential, highlighting the tunability of the electronic properties of multiphase metal telluride thin films. A significant decline in the activation energy (E ac ) was observed between 6 and 8 V, suggesting that this range is the optimal applied voltage window for device applications due to enhanced thermally activated conduction. Finally, density functional theory ( DFT ) calculations of the photoabsorption coefficient indicated that Bi 2 Te 3 and Sb 2 Te 3 exhibited higher absorption coefficients than Al 2 Te 3 and Al 7 Te 10 . Among these materials, Bi 2 Te 3 exhibited the strongest absorption coefficient at higher photon energies, whereas the other phases exhibited enhanced absorption in the red-light region.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Advanced Thermoelectric Materials and Devices · Advanced Semiconductor Detectors and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Enhanced optical properties of V2O5 thin films through rare earth co-doping for optoelectronic applications10.1016/j.physb.2024.416881 ↗
2. Mechanism of chemical bath deposition of CdS thin films: influence of sulphur precursor concentration on microstructural and optoelectronic characterizations10.3390/coatings12101400 ↗
3. Structural and optoelectronic properties of electrodeposited CdSe thin films: effect of Cu-dopant10.1016/j.physb.2023.415623 ↗
4. Zinc sulfide thin films deposited by chemical bath: tuning consideration of structural, optical band gap, and electrical properties for CIGS solar cells application10.1016/j.ceramint.2024.01.082 ↗
5. Photoconductive PbSe thin films and the role of potassium iodide10.1016/j.jallcom.2022.164155 ↗
6. Microstructure and optical properties of CdTe thin films prepared by close spaced sublimation method at various growth temperatures10.1016/j.jlumin.2022.119372 ↗
7. Synthesis of copper telluride thin films by electrodeposition and their electrical and thermoelectric properties10.3389/fchem.2022.799305 ↗
8. Structural, optical and morphological characterization of Sb2S3 thin films grown by physical vapor deposition
9. Fabrication of metal chalcogenide thin films by a facile thermolysis process under air ambient using metal-3-mercaptopropionic acid complex10.1016/j.materresbull.2021.111346 ↗
10. Two distinctive regimes in the charge transport of a magnetic topological ultra thin film10.1088/1367-2630/abc989 ↗
11. Synthesis of nanocrystalline Mn-doped Bi2Te3 thin films via magnetron sputtering10.3390/cryst15010054 ↗
12. Effect of chromium doping on the thermoelectric properties of Bi2Te3: CrxBi2Te3 and CrxBi2xTe310.1007/s11664-013-2670-4 ↗
13. Synthesis of heavily Cu-doped Bi2Te3 nanoparticles and their thermoelectric properties10.1016/j.jssc.2018.11.024 ↗
14. Effect of doped indium into Bi2Te3 matrix on the microstructure and thermoelectric transport properties10.1039/C6RA09767G ↗
15. High-pressure synthesis, crystal chemistry and physics of perovskites with small cations at the A site10.1088/0953-8984/26/16/163201 ↗
16. Unexpectedly strong binding of a large metal ion (Bi3+) to human serum transferrin10.1074/jbc.271.16.9483 ↗
18. SILAR growth of pure CdO and copper-doped CdO thin films: structural, optical and electrical properties10.1016/j.matchemphys.2025.131320 ↗
19. Enhanced electrical property of nanostructured Sb-doped SnO2 thin film processed by soft chemical method10.1016/j.tsf.2003.10.101 ↗
20. Sb3+ doped Cs3YCl6 metal halides with highly efficient broad-band green emission for light-emitting diode and X-ray imaging
21. Impact of Sb-insertion on structural, optical, and dielectric characteristics of the PbI2 thin film10.1016/j.optmat.2022.113180 ↗
22. Intrinsic oxygen vacancy and extrinsic aluminum dopant interplay: a route to the restoration of defective TiO210.1021/jp407736f ↗
23. High figure-of-merit in Al-doped ZnO thin films grown by ALD through the Al content adjustment10.1016/j.mtla.2023.101863 ↗
24. Exploring Burstein–Moss type effects in nickel doped hematite dendrite nanostructures for enhanced photo-electrochemical water splitting10.1039/C9CP04132J ↗
25. Defect-induced Burstein–Moss shift in reduced V2O5 nanostructures10.1103/PhysRevB.94.245305 ↗
26. Effect of immersion time in simulated body fluid on adhesion strength of hydrothermally treated hydroxyapatite–titanium nitride films on polyetheretherketones
27. The impact of iron concentration on the structural and optical properties of iron lead sulphide thin films10.1016/j.jics.2025.102085 ↗
28. Theoretical DFT and experimental investigation of the effect of Co doping in electrochemically deposited ZnSe films10.1016/j.optmat.2024.115893 ↗
29. Relationship between microstrain and lattice parameter change in nanocrystalline materials10.1080/09500830701840155 ↗
30. Comparative study of crystallite size using Williamson–hall and debye–scherrer plots for ZnO nanoparticles10.1088/2043-6254/ab52f7 ↗
31. Particle size effects on dislocation density, microstructure, and phase transformation for high-entropy alloy powders10.1016/j.mtla.2021.101161 ↗
32. Si-doping-induced reversal of surface energies in nonpolar (1010) and (1120) planes of AlN crystal
33. Effect of surface morphology and elemental composition on the magnetization behaviour of electrodeposited NiFe films
34. Effect of deposition temperature on the properties of copper–zinc sulphide thin films using mixed copper and zinc dithiocarbamate precursors10.35378/gujs.887025 ↗
35. Effect of 3 MeV proton ion irradiation on optical properties of Se70Te20Sn10 thin films for photonic applications10.1016/j.physb.2025.416930 ↗
36. Tuning linear and nonlinear optical properties of Se70Te20Sb10 thin films via 3 MeV proton irradiation for photonic applications10.1016/j.mssp.2025.110040 ↗
37. The impact of proton ion irradiation on Se70Te20In10 thin films: Linear and non-linear optical properties for photonic applications10.1016/j.physb.2024.416663 ↗
38. Simple fabrication of visible light-responsive Bi–BiOBr/BiPO4 heterostructure with enhanced photocatalytic activity10.1155/2021/4835596 ↗
39. Synthesis and X-ray photoelectron spectroscopy (XPS) and thermoelectric studies of ternary Bi2(Te0.5Se0.5)3 mixed-metal chalcogenide thin films by the arrested precipitation technique10.1139/v11-107 ↗
40. Intrinsic surface passivation of CdTe10.1063/1.4933186 ↗
41. A study on the properties of tellurium-oxide thin films based on the variable sputtering gas ratio10.3938/jkps.66.1744 ↗
42. Oxidation precursor dependence of atomic layer deposited Al2O3 films in a-Si:H(i)/Al2O3 surface passivation stacks10.1186/s11671-015-0798-2 ↗
43. High rate roll-to-roll atmospheric atomic layer deposition of Al2O3 thin films towards gas diffusion barriers on polymers10.1016/j.matlet.2014.07.186 ↗
44. XPS study on calcining mixtures of brucite with titania10.3390/ma15093117 ↗
45. Synthesis and purple-blue emission of antimony trioxide single-crystalline nanobelts with elliptical cross section10.1007/s12274-009-9014-y ↗
46. Surface characterization at CERN of photocathodes for photoinjector applications
47. Sb2Se3 assembling Sb2O3@attapulgite as an emerging composite for catalytic hydrogenation of p-nitrophenol10.1038/s41598-017-03281-z ↗
48. An antimonate pyrochlore (H1.23Sr0.45SbO3.48) for photocatalytic oxidation of benzene: effective oxygen usage and excellent activity10.1039/C6TA08652G ↗
49. Microwave synthesis of antimony oxide graphene nanoparticles – a new electrode material for supercapacitors10.1039/D3NA00514C ↗
50. Exploration of the impact of indium-doping on the microstructural, dispersion, linear, and nonlinear optical properties of the ZnS thin films10.1016/j.physb.2025.417271 ↗
51. Preparation and characterization of innovative VSbO4 thin films via nebulized spray pyrolysis technique10.1007/s11082-023-05486-1 ↗
52. Influence of potassium doping on the microstructural, electrical, and optical properties of V2O5 thin films prepared by nebulizer spray pyrolysis10.1016/j.physb.2025.418053 ↗
53. Post-annealing effect on the structural and optical properties of tungsten trioxide thin films prepared by thermal evaporation10.1016/j.matchemphys.2025.130670 ↗
54. Investigation of the effect of K-doping on the structural, dispersion, optical, and electrical properties of the Mn2VO4 thin films10.1007/s10854-025-15873-x ↗
55. Characterizations and optical discussions of thermally evaporated titanium dioxide thin films10.1007/s12596-024-02207-z ↗
56. Impact of Pd2+ and Sn4+ co-doping ZnO nanoflakes toward high-performing schottky diode based on the generation of intermediate bands within the energy gap10.1007/s10854-024-13398-3 ↗
57. Fabricating high refractive index titanium dioxide film using electron beam evaporation for all-dielectric metasurfaces10.1557/mrc.2016.13 ↗
58. Ultrastructural changes in the fat body of desert locust, Schistocerca gregaria (Orthoptera: Acrididae) treated with zinc chromium oxide nanostructures via chemical co-precipitation approach10.1186/s13065-023-00914-5 ↗
59. Effect of tin concentrations on the elemental and optical properties of zinc oxide thin films10.1016/j.heliyon.2023.e23190 ↗
60. Band gap opening and semiconductor–metal phase transition in (n,n) single-walled carbon nanotubes with distinctive boron–nitrogen line defect10.1039/C5CP06853C ↗
61. Amorphous effect on the advancing of wide-range absorption and structural-phase transition in γ-In2Se3 polycrystalline layers10.1038/srep04764 ↗
62. Band gap widening and narrowing in moderately and heavily doped n-ZnO films10.1016/j.sse.2006.07.001 ↗
63. ZnTe thin films: deposition methods, physical properties, and device prospects
64. Effect of post-annealing temperature on microstructural, morphological and optical properties of sol–gel spin coated Cu doped SnO2 thin films10.1007/s13538-024-01620-w ↗
65. High-performance photothermal conversion of narrow-bandgap Ti2O3 nanoparticles
66. CLEO collaboration, two-dimensional P3m1 Ca3N2, Ba3P2, and Ba3As2: promising stable narrow-gap semiconductors for infrared and broadband photodetectors10.1103/PhysRevApplied.22.034013 ↗
67. High electrical conductivity-induced enhancement effect of electrochemical performance in mesoporous NiCo2S4 nanorod-based supercapacitor10.1016/j.est.2019.100955 ↗
68. Tunability of structural, optical, and electrical properties of pristine MnSe thin film by gradually changing temperature for optoelectronic applications10.1016/j.physb.2021.413600 ↗
69. Electronic structure of Bi-activated luminescent compounds and pure bismuth photocatalytic compounds10.1149/2162-8777/ac19c6 ↗
70. Processing effects on the stability of amorphous indium gallium zinc oxide thin-film transistors10.1016/j.jnoncrysol.2007.10.105 ↗
71. The influence of RF power on the electrical properties of sputtered amorphous In–Ga–Zn–O thin films and devices10.1088/1674-4926/34/8/084003 ↗
72. Oxide semiconductor thin-film transistors: a review of recent advances10.1002/adma.201103228 ↗
73. Origin of threshold voltage instability in amorphous indium–gallium–zinc oxide thin film transistors10.1063/1.2990657 ↗
74. Impact of the applied electrode system on properties of electrodeposited calcium phosphate coatings
75. Temperature dependence of the electrical resistivity and the anisotropic magnetoresistance (AMR) of electrodeposited Ni–Co alloys10.1140/epjb/e2010-00132-4 ↗
76. Influence of grain boundary scattering on the field-effect mobility of solid-phase crystallized hydrogenated polycrystalline In2O3 (In2O3:H)10.3390/nano12172958 ↗
77. Suppression of grain boundary contributions on carrier mobility in thin Al-doped ZnO epitaxial films10.1016/j.apsusc.2023.157133 ↗
78. Atoms, molecules, solids, and surfaces: applications of the generalized gradient approximation for exchange and correlation10.1103/PhysRevB.46.6671 ↗
79. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
80. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗