Strategic TCO selection: Insights from MTO/TCO bilayer coupling analysis
Source abstract
Abstract
Doped metal oxides are versatile materials with diverse applications, particularly as transparent conducting oxides (TCOs) and window layers in solar cells. While TCOs exhibit electronic conduction, window layers act as semiconductors. Despite significant advancements in the study of metal-semiconductor junctions, the interplay between homologous doped metal oxides fulfilling these dual roles remains largely unexplored. Magnesium-doped tin oxide (MTO), recognized for its wide bandgap, has emerged as a promising window layer material. However, the optoelectronic coupling between MTO and various TCOs remains insufficiently understood. This study investigates three MTO/TCO bilayer configurations: MTO/FTO (fluorine-doped tin oxide), MTO/AZO (aluminum-doped zinc oxide), and MTO/ITO (indium tin oxide). Through comprehensive structural, chemical, morphological, optical, and electrical characterizations, the influence of coupling MTO with different TCOs was evaluated. The results provide valuable insights into the mutual interactions between these materials, guiding the selection of optimal TCO. These findings hold promise for improving the efficiency and stability of next-generation photovoltaic devices. • MTO/TCO bilayers were studied focusing on structural compatibility. • MTO/FTO shows minimal lattice mismatch, improving junction properties. • Chemical analysis reveals Mg diffusion enhances interface stability in MTO/FTO. • MTO/FTO shows lowest interfacial resistance among bilayers. • MTO/FTO emerges as the most suitable bilayer for photovoltaic applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Role of defects on the transparent conducting properties of binary metal oxide thin film electrodes
2. Band‐offset engineering for enhanced open‐circuit voltage in polymer–oxide hybrid solar cells10.1002/adfm.200600215 ↗
3. Interrelation of the CdTe grain size, postgrowth processing, and window layer selection on solar cell performance10.1021/acsami.2c07609 ↗
4. A study of CdTe solar cells using Ga-doped MgxZn1-xO buffer/TCO layers: simulation and performance analysis10.1016/j.jsamd.2018.12.001 ↗
5. In 2 O 3 − Ga 2 O 3 alloys as potential buffer layers in Cd Te thin-film solar cells10.1103/PhysRevApplied.15.034028 ↗
6. Metal oxide semiconductors and conductors
7. Enabling high performance n-type metal oxide semiconductors at low temperatures for thin film transistors10.1039/D0QI00038H ↗
8. Effect of doping on the structural and optical properties of SnO 2 thin films fabricated by aerosol assisted chemical vapor deposition10.1088/1742-6596/439/1/012013 ↗
9. Crystal structure, raman spectroscopy and optical property study of Mg-Doped SnO2 compounds for optoelectronic devices10.3390/cryst13060932 ↗
10. Synthesis and magnetic properties of Mg doped SnO2 thin films: experimental and Ab-initio study10.1007/s11082-017-0990-y ↗
11. Influence of substrates on the structural and optical properties of chemically deposited CdS films10.1016/j.tsf.2006.12.097 ↗
12. Mg-doped SnO2 properties modulation applied to all-sputtered CdTe solar cells10.1016/j.solener.2024.112549 ↗
13. A study on low cost-high conducting fluorine and antimony-doped tin oxide thin films10.1016/j.apsusc.2004.11.074 ↗
14. XPS and X-ray diffraction studies of aluminum-doped zinc oxide transparent conducting films10.1016/0040-6090(95)08239-5 ↗
15. Effect of film thickness on the properties of indium tin oxide thin films10.1063/1.1318368 ↗
16. Characterization of aluminium doped zinc oxide thin films deposited on polymeric substrates10.1016/S0042-207X(01)00319-0 ↗
17. Klug · 1976
18. Misfit dislocations in lattice-mismatched epitaxial films10.1080/10408439208244585 ↗
19. The scherrer formula for X-Ray particle size determination10.1103/PhysRev.56.978 ↗
20. Grain growth following recrystallization
21. The effect of post annealing temperature on grain size of indium-tin-oxide for optical and electrical properties improvement10.1016/j.rinp.2019.102159 ↗
22. Polycrystalline growth and recrystallization processes in sputtered ITO thin films10.1016/j.tsf.2005.12.273 ↗
23. Effect of substrate temperature on the structural, electrical and optical properties of ITO films prepared by RF magnetron sputtering10.1002/(SICI)1521-396X(200002)177:2<445::AID-PSSA445>3.0.CO;2-N ↗
24. Influence of target-to-substrate distance on the properties of AZO films grown by RF magnetron sputtering10.1016/j.tsf.2003.09.031 ↗
25. Impact of RF sputtering power on AZO thin films for flexible electro‐optical applications10.1002/crat.202000144 ↗
26. Optical and electrical characterization of gradient AZO thin film by magnetron sputtering10.1007/s10854-016-5115-z ↗
27. Electrical and optical properties of fluorine doped tin oxide thin films prepared by magnetron sputtering10.3390/coatings4040732 ↗
28. First principle study on the electronic structure of fluorine-doped SnO210.1016/j.ssc.2009.01.010 ↗
29. The principles determining the structure of complex IONIC crystals10.1021/ja01379a006 ↗
30. Initial stages of ITO/Si interface formation: in situ x-ray photoelectron spectroscopy measurements upon magnetron sputtering and atomistic modelling using density functional theory10.1063/1.4866991 ↗
31. The complementary nature of X-Ray photoelectron spectroscopy and angle-resolved X-Ray diffraction part I: background and theory10.1361/105994998770347765 ↗
32. Lattice mismatch at the heterojunction of perovskite solar cells
33. Origin of characteristic grain-subgrain structure of tin-doped indium oxide films10.1016/0040-6090(94)06390-7 ↗
34. Influence of post-annealing temperature on the properties exhibited by ITO, IZO and GZO thin films10.1016/j.tsf.2007.03.126 ↗
35. Influence of dc magnetron sputtering parameters on surface morphology of indium tin oxide thin films10.1016/S0169-4332(03)00862-6 ↗
36. A comparison of transmittance properties between ZnO: al films for transparent conductors for solar cells deposited by sputtering of AZO and cosputtering of AZO/znO10.1016/S1001-0521(07)60054-0 ↗
37. Physicochemical characteristics of fluorine doped tin oxide films10.1088/0022-3727/39/23/029 ↗
38. Deposition-temperature effects on AZO thin films prepared by RF magnetron sputtering and their physical properties
39. Optical and electrical properties of SnO 2 :F thin films obtained by R.F. sputtering with various targets, act10.1155/1991/85965 ↗
40. Methods of determining the refractive index of thin solid films
41. Characterization of transparent conducting oxides10.1557/mrs2000.152 ↗
42. Transmission spectra without interference fringes10.1366/000370277774464165 ↗
43. Electronic and optical properties of fluorine-doped tin oxide films10.1063/1.366796 ↗
44. Structural, electrical and optical properties of aluminum doped zinc oxide films prepared by radio frequency magnetron sputtering10.1063/1.365556 ↗
45. Microstructure and optical properties of nano multilayers of CeO2/ZrO2 and Gd2O3/CeO2 prepared by pulsed laser deposition10.1166/jnn.2016.12836 ↗
46. A review of the optical band gap of thin film CdSxTe1−x10.1016/j.solmat.2005.07.003 ↗
47. Models of electric transport in bilayer Ni/Cu and in a trilayer ni/pd/cu thin films10.18576/ijtfst/060303 ↗
48. Advantages of thin interfaces in step-graded buffer structures10.1016/S0921-5107(96)01757-6 ↗
49. Interdiffusion in oxides (A,B)O (I): a numerical study of point-defect relaxation phenomena10.1080/01418619008231942 ↗