Facile and reliable route to ensure chemical-environmental stability of pen-printed organic transistors with blended polymer Semiconductor–Insulator
Source abstract
Abstract
Abstract We have introduced an efficient pen-printing method for solution-process fabrication of organic field-effect transistors (OFETs). Although polymer semiconductors used in this method are promising materials that provide electrical properties with mechanical flexibility, they have drawbacks such as poor long-term driving stability or dramatically decreased electrical performance under chemical environments. Herein we applied the spontaneous phase separation in blended polymers of poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) and polystyrene (PS) as model semiconducting and protective polymers, respectively. A protective PS layer spontaneously formed on top of the PTAA layer, preventing direct exposure to chemical molecules and thus greatly improving long-term driving stability under ambient, high-humidity, and even ethanol vapor conditions. Even under the harshest ethanol vapor condition, the average field-effect mobility (μFET) of the PTAA + PS-blend FETs were maintained at 76% or more, and the threshold voltage showed only a small change of ±1.1 V over the range of vacuum, ambient, 75% humidity, and ethanol vapor conditions. Furthermore, μFETs of the PTAA + PS-blend FETs showed a low range of variation of about ±10% during 50 repeated measurements over 100 min under all conditions. The result suggests an efficient way forming a protective layer without an additional deposition step to secure the chemical and environmental stabilities of practical electronics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Insight into high-performance conjugated polymers for organic field-effect transistors
2. Organic crystalline materials in flexible electronics10.1039/C8CS00406D ↗
3. Recent progress in printable organic field effect transistors10.1039/C8TC05485A ↗
4. Development of high-performance printed organic field-effect transistors and integrated circuits10.1039/C4CP02413C ↗
5. Advanced materials for printed wearable electrochemical devices: a review10.1002/aelm.201600260 ↗
6. Anisotropy of charge transport in a uniaxially aligned fused electron-deficient polymer processed by solution shear coating10.1002/adma.202000063 ↗
7. Flexible and printed organic transistors: from materials to integrated circuits10.1016/j.orgel.2019.105432 ↗
8. Solution-processable organic and hybrid gate dielectrics for printed electronics10.1016/j.mser.2018.02.004 ↗
9. Inkjet-printing: a new fabrication technology for organic transistors10.1002/admt.201700063 ↗
10. Gravure printed ultrathin dielectric for low voltage flexible organic field-effect transistors10.1002/admi.201900173 ↗
11. Design strategies in the pen-printing technique toward elaborated organic electronics10.1021/acs.jpcc.8b12091 ↗
12. Fully drawn all-organic flexible transistors prepared by capillary pen printing on flexible planar and curvilinear substrates10.1002/aelm.201500301 ↗
13. Tuning conformation, assembly, and charge transport properties of conjugated polymers by printing flow10.1126/sciadv.aaw7757 ↗
14. High operational and environmental stability of high-mobility conjugated polymer field-effect transistors through the use of molecular additives10.1038/nmat4785 ↗
15. Performance improvements in conjugated polymer devices by removal of water-induced traps10.1002/adma.201801874 ↗
16. Air effect on the ideality of p-type organic field-effect transistors: a double-edged sword10.1002/adfm.201906653 ↗
17. Trends in molecular design strategies for ambient stable n-channel organic field effect transistors10.1039/C6TC05467F ↗
18. High-performance, air-stable field-effect transistors based on heteroatom-substituted naphthalenediimide-benzothiadiazole copolymers exhibiting ultrahigh electron mobility up to 8.5 cm V−1 s−110.1002/adma.201602410 ↗
19. Using molecular design to increase hole transport: backbone fluorination in the benchmark material poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]-thiophene(pBTTT)10.1002/adfm.201502826 ↗
20. Highly reliable superhydrophobic protection for organic field-effect transistors by fluoroalkylsilane-coated TiO2 nanoparticles10.1021/acsnano.8b05224 ↗
21. Simultaneous protection of organic p- and n-channels in complementary inverter from aging and bias-stress by DNA-base Guanine/Al2O3 double layer10.1021/am507354p ↗
22. Identifying orthogonal solvents for solution processed organic transistors10.1016/j.orgel.2015.12.008 ↗
23. Organic semiconductor/polymer blend films for organic field-effect transistors10.1002/admt.201900104 ↗
24. Conjugated polymer/paraffin blends for organic field-effect transistors with high environmental stability10.1039/C9NR02425E ↗
25. Alignment and charge transport of one-dimensional conjugated polymer nanowires in insulating polymer blends10.1021/acs.macromol.6b01721 ↗
26. Enhanced gate-bias stress stability of organic field-effect transistors by introducing a fluorinated polymer in semiconductor/insulator ternary blends10.1016/j.apsusc.2019.03.090 ↗
27. Improving charge carrier mobility of polymer blend field effect transistors with majority insulating polymer phase10.1021/acs.jpcc.7b09775 ↗
28. Organic thin-film transistors based on blends of poly(3-hexylthiophene) and polystyrene with a solubility-induced low percolation threshold10.1021/cm900628j ↗
29. Bar-coated ultrathin semiconductors from polymer blend for one-step organic field-effect transistors10.1021/acsami.8b07118 ↗
30. Tailoring morphology and structure of inkjet-printed liquid-crystalline semiconductor/insulating polymer blends for high-stability organic transistors10.1002/adfm.201504786 ↗
31. Influences of energetically controlled dielectric functionality on polymer field-effect transistor performance10.1021/acs.jpcc.9b09913 ↗
32. Microstructural control over soluble pentacene deposited by capillary pen printing for organic electronics10.1021/am401698c ↗
33. Morphology and optoelectronic characteristics of organic field-effect transistors based on blends of polylactic acid and poly(3-hexylthiophene)10.1038/s41428-018-0087-x ↗
34. Coordinated optical matching of a texture interface made from demixing blended polymers for high-performance inverted perovskite solar cells10.1021/acsnano.9b07594 ↗
35. Organic semiconductor/insulator polymer blends for high-performance organic transistors10.3390/polym6041057 ↗
36. Surficial marangoni flow-induced growth of ultrathin 2D molecular crystals on target substrates10.1002/admi.201901753 ↗
37. High-mobility, solution-processed organic field-effect transistors from C8-BTBT:polystyrene blends10.1002/aelm.201800076 ↗
38. High mobility organic field-effect transistors from majority insulator blends10.1021/acs.chemmater.5b04774 ↗
39. Engineering asymmetric charge injection/extraction to optimize organic transistor performances10.1021/acsami.9b01658 ↗
40. Charge carrier traps in organic semiconductors: a review on the underlying physics and impact on electronic devices10.1039/C9TC05695E ↗
41. Enhanced environmental stability induced by effective polarization of a polar dielectric layer in a trilayer dielectric system of organic field-effect transistors: a quantitative study10.1021/am507636k ↗