The effect of substituting La and Co with Ca and Ti in LaCoO3/KIT-6 on its properties and possible catalytic application in syngas conversion
Source abstract
Abstract
Abstract Perovskite-type samples La1-xCaxCo1-xTixO3/KIT-6 (x = 0–0.5) were synthesized by citrate method. KIT-6 is partially embedded in the perovskite structure. The complete reduction of cobalt in perovskites in the presence of KIT-6 occurs at a temperature of ca. 670 °C due to the formation of a cobalt silicate phase. With the substitution of titanium for cobalt cations, the complete reduction of cobalt occurs at temperatures above 720 °C. The proportion of cobalt that is reduced at temperatures below 500 °C increases with an increase in the ratio of Co3+/Co2+ cations. Partial substitution of cobalt cations with titanium cations decreases the selectivity ratios SCH3OH/SC2+OH and SCH4/SC2-8. The introduction of calcium cations leads, proportionally to its content, to a strong decrease in selectivity to methanol and an increase in selectivity for light hydrocarbons C2-8 in syngas conversion. It was shown that the maximum selectivity for higher alcohols with a low selectivity for methanol is observed at x = 0.3 on a sample containing calcium. A significant amount of the cobalt carbide phase Co2C in the used KIT-6-free sample of LaCoO3 is accompanied by the predominance of the methanation reaction (CH4 selectivity 58.7%). The synthesized samples on KIT-6 have higher selectivity to alcohols compared to a conventional CoAl oxide catalyst and somewhat lower activity in syngas conversion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Catalysts for Methane Reforming · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Synthesis and properties of the double perovskites La2NiVO6, La2CoVO6, and La2CoTiO610.1016/j.jssc.2006.09.013 ↗
2. The role of the Co2+/Co3+ redox-pair in the properties of La2−xSrxCoTiO6 (0 ≤ x ≤ 0.5) perovskites as components for solid oxide fuel cells10.1016/j.jpowsour.2012.11.066 ↗
3. Integrated process for the catalytic conversion of biomass-derived syngas into transportation fuels10.1039/C5GC02298C ↗
4. Tailoring the product selectivity of Co/SiO2 Fischer-Tropsch synthesis catalysts by lanthanide doping10.1016/j.cattod.2018.10.064 ↗
5. Kinetics and selectivity of the fischer–tropsch synthesis: a literature review10.1081/CR-100101170 ↗
6. Cobalt hybrid catalysts in Fischer-Tropsch synthesis10.1515/revce-2018-0012 ↗
7. Kinetics and selectivity study of fischer–tropsch synthesis to C5+ hydrocarbons: a review10.3390/catal11030330 ↗
8. New perovskite materials of the La2−xSrxCoTiO6 series10.1039/c1dt10196j ↗
9. Effects of alkali promoters on tri-metallic Co-Ni-Cu-based perovskite catalyst for higher alcohol synthesis from syngas10.1016/j.cattod.2019.06.061 ↗
10. Structural evolution of bimetallic Co-Cu catalysts in CO hydrogenation to higher alcohols at high pressure10.1016/j.jcat.2020.01.004 ↗
11. Syngas conversion over perovskite-like LaCuxTi1-xO3/KIT-6 catalysts10.1016/j.apcata.2020.117834 ↗
12. Direct imaging of surface topology and pore system of ordered mesoporous silica (MCM-41, SBA-15, and KIT-6) and nanocast metal oxides by high resolution scanning electron microscopy10.1021/ja803362s ↗
13. Nanocasted synthesis of mesoporous LaCoO3 perovskite with extremely high surface area and excellent activity in methane combustion10.1021/jp8048394 ↗
14. Principles and measurement techniques in diffuse reflectance spectroscopy10.3367/UFNr.0085.196502f.0365 ↗
15. Structure evolution with Sr content of the perovskite-like materials La2-xSrxCoTiO6 (0 ≤ x ≤ 0.5)10.1107/S1600576714004907 ↗
16. Crystal structure, morphology and physical properties of LaCo1−xTixO3±δ perovskites prepared by a citric acid assisted soft chemistry synthesis10.1016/j.actamat.2009.09.046 ↗
17. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
18. δ-Alumina supported cobalt catalysts promoted by ruthenium for Fischer-Tropsch synthesis10.1016/j.apcata.2017.04.003 ↗
19. The role of defects in microwave and conventionally synthesized LaCoO3 perovskite10.1016/j.jeurceramsoc.2015.12.014 ↗
20. Cobalt-containing catalysts supported by synthetic Zn- and Mg-stevensites and their performance in the Fischer–Tropsch synthesis10.1016/S1381-1169(00)00530-6 ↗
21. formation of lanthanum hydroxide and oxide via precipitation10.4028/www.scientific.net/SSP.135.23 ↗
22. Temperature programme reduction (TPR) studies of cobalt phases in γ-alumina supported cobalt catalysts10.5897/JPTAF2015.0122 ↗
23. Neutron structural characterization and transport properties of the oxidized and reduced LaCo0.5Ti0.5O3 perovskite oxide10.1088/1742-6596/549/1/012022 ↗
24. Evidence for the excited triplet of Co3+ in LaCoO310.1103/PhysRevB.66.094404 ↗
25. Two spin-state transitions in LaCoO310.1143/JPSJ.67.290 ↗
26. Origin of the orbital polarization of Co2+ in La2CoTiO6 and (LaCoO3)1+(LaTiO3)1: a DFT+U and DFMT study10.1103/PhysRevB.103.125105 ↗
27. Lever · 1984 · vol. 33 · 420
28. Electronic state, and particle size stabilization of nanoparticulate [Co(OH)2(H3O)δ+]δ+10.1134/S0020168509120097 ↗
29. Physico-chemical study on the state of cobalt in a precipitated cobalt-aluminum oxide system10.1039/b201967a ↗
30. Yurieva
31. Khasin
32. Status and prospects in higher alcohols synthesis10.1039/C6CS00324A ↗
33. Synthesis of mixed alcohols from syngas over Cs-modified Cu/Ce1-xZrxO2 catalysts10.1627/jpi.53.153 ↗
34. Cu–Zn synergy for CO hydrogenation to ethanol and methanol on CuZnO catalysts
35. A simple and low cost method for the synthesis of metallic cobalt nanoparticles without further reduction as an effective catalyst for Fischer–Tropsch Synthesis10.1007/s11144-021-02046-0 ↗
36. A novel and facile strategy to decorate Al2O3 as an effective support for Co-based catalyst in Fischer-Tropsch synthesis10.1016/j.fuel.2020.119780 ↗
37. Impurity control in catalyst design: the role of sodium in promoting and stabilizing Co and Co2C for syngas conversion10.1002/cctc.202001703 ↗
38. Enhanced alcohol production over binary Mo/Co carbide catalysts in syngas conversion10.1016/j.jcat.2020.09.003 ↗