journal article·2022-03

Twelve modified figures of merit of 2–2-type composites based on relaxor-ferroelectric single crystals

A.N. Isaeva, V.Yu. Topolov, C.R. Bowen, J.I. Roscow

Publisher page

Abstract

Twelve modified figures of merit are studied for the first time for 2–2-type composites based on relaxor-ferroelectric single crystals such as [001]-poled (1 – x)Pb(A1/3Nb2/3)O3 – xPbTiO3, where A = Mg or Zn. These modified figures of merit are related to the piezoelectric coefficients d3j* of the composite (j = 1, 2 and 3) and characterise the effectiveness of energy harvesting and transduction along the three co-ordinate axes OXj of a piezoelectric composite under a constant mechanical stress or strain. The volume-fraction dependencies of the modified figures of merit are analysed for parallel-connected 2–2 and 2–2–0 composites, and the effect of porosity (i.e. the volume fraction and shape of air pores in each polymer layer) on these figures of merit is considered for 2–2–0 composites. Linkages between the modified figures of merit and traditional energy-harvesting figures of merit d3j*g3j* are discussed for the studied 2–2-type composites. New diagrams are developed to indicate important volume-fraction ranges that correspond to a large anisotropy of exemplar modified figures of merit. Due to the large effective parameters and large anisotropy of specific figures of merit, the studied composites are of interest in piezoelectric sensor, transducer and energy-harvesting applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · Acoustic Wave Phenomena Research · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Single crystal PZN/PT-polymer composites for ultrasound transducer applications, IEEE Trans. Ultrason., Ferroelectr10.1109/58.852060 ↗
2. Single crystal 0.7Pb(Mg1/3Nb2/3)O3–0.3PbTiO3/epoxy 1–3 piezoelectric composites prepared by the lamination technique10.1016/j.matchemphys.2007.04.060 ↗
3. Elastic, piezoelectric, and dielectric properties of multidomain 0.67Pb(Mg1/3Nb2/3)O3–0.33PbTiO3 single crystals10.1063/1.1390494 ↗
4. Advantages and challenges of relaxor-PbTiO3 ferroelectric crystals for electroacoustic transducers – a review10.1016/j.pmatsci.2014.10.002 ↗
5. Single crystal PMN–PT/epoxy 1–3 composite for energy-harvesting application, IEEE Trans. Ultrason., Ferroelectr10.1109/TUFFC.2006.1610572 ↗
6. Bowen · 2016
7. Piezoelectric energy harvesting systems – essentials to successful developments10.1002/ente.201700785 ↗
8. Relations between the piezoelectric performance and quality factors in a corundum-containing composite10.1016/j.matchemphys.2019.05.019 ↗
9. Modified energy harvesting figures of merit for stress- and strain-driven piezoelectric systems10.1140/epjst/e2019-800143-7 ↗
10. Technology and electrophysical parameters of piezocomposites with a connection type 2–0–210.1007/978-3-030-19894-7_8 ↗
11. Longitudinal piezoelectric effect and hydrostatic response in novel laminar composites based on ferroelectric ceramics10.1016/j.ceramint.2019.07.248 ↗
12. A flexible, sandwich structure piezoelectric energy harvester using PIN-PMN-PT/epoxy 2-2 composite flake for wearable application10.1016/j.sna.2017.07.059 ↗
13. An effective flexible wireless energy harvester/sensor based on porous electret piezoelectric polymer10.1016/j.matchemphys.2016.11.003 ↗
14. Enhancement in energy storage and piezoelectric performance of three phase (PZT/MWCNT/PVDF) composite10.1016/j.matchemphys.2020.122639 ↗
15. Connectivity and piezoelectric-pyroelectric composites10.1016/0025-5408(78)90161-7 ↗
16. Modeling of highly loaded 0–3 piezoelectric composites using a matrix method, IEEE Trans. Ultrason., Ferroelectr10.1109/58.738289 ↗
17. Micromechanics determination of the effective properties of piezoelectric composites containing spatially oriented short fibers10.1016/S1359-6454(96)00090-0 ↗
18. Electromechanical properties of porous piezoelectric ceramics10.1111/j.1151-2916.1993.tb06637.x ↗
19. Ikeda · 1990
20. Analysis and experimental validation of the figure of merit for piezoelectric energy harvesters10.1039/C8MH00097B ↗
21. R. Zhang, W. Jiang, B. Jiang, W. Cao, Elastic, dielectric and piezoelectric coefficients of domain engineered 0.70Pb(Mg1/3Nb2/3)O3–0.30PbTiO3 single crystal. Fundamental Physics of Ferroelectrics, ed. by R.E. Cohen (American Institute of Physics, Melville, 2002) p. 188–197.10.1063/1.1499567 ↗
22. Characterization of Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 ferroelectric crystal with enhanced phase transition temperatures10.1063/1.2978333 ↗
23. Electromechanical properties and anisotropy of single and multi-domain 0.72Pb(Mg1/3Nb2/3)O3–0.28PbTiO3 single crystals10.1063/1.3652703 ↗
24. Complete set of material constants of 0.93Pb(Zn1/3Nb2/3)O3-0.07PbTiO3 domain engineered single crystal10.1023/A:1021573431692 ↗
25. Structure and high-piezoelectricity in lead oxide solid solutions10.1016/S1359-0286(02)00015-3 ↗
26. Modified reception parameters of 1–3 composites based on ferroelectric crystals10.1134/S1063784221060207 ↗
27. High-performance 1–3-type composites based on (1 − x)Pb(A1/3 Nb2/3)O3–xPbTiO3 single crystals (A = Mg, Zn)10.1088/0022-3727/39/9/029 ↗
28. Scaling effects of relaxor-PbTiO3 crystals and composites for high frequency ultrasound10.1063/1.3437068 ↗
29. Advantages and challenges of relaxor-PbTiO3 ferroelectric crystals for electroacoustic transducers – a review10.1016/j.pmatsci.2014.10.002 ↗
30. High performance ferroelectric relaxor-PbTiO3 single crystals: status and perspective10.1063/1.3679521 ↗
31. E.K. Akdoğan, A. Safari, Development of 2–2 piezoelectric ceramic/polymer composites by direct-write technique10.1007/s10832-009-9561-3 ↗