journal article·2019-08

Broadened temperature range of high-performance in 0.5Ba(Zr0.2Ti0.8)O3–0.5(Ba0.7Ca0.3)TiO3 ceramics prepared by pre-sintering (Ba0.7Ca0.3)TiO3 gel method

Yang Yang, Wenfeng Wang, Guowu Wang, Tao Wang, Desheng Xue

Publisher page

Abstract

Abstract High-performance temperature range of the morphotropic phase boundary in the 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 series of ceramics is broadened by sintering the green ceramic discs formed from the mixture of pre-sintering (Ba0.7Ca0.3)TiO3 gel and Ba(Zr0.2Ti0.8)O3 gel. The morphotropic phase boundary occurring at room temperature with x = 0.5 is found out in the series of the (1-x)Ba(Zr0.2Ti0.8)O3-x(Ba0.7Ca0.3)TiO3 ceramics sintered at 1250 C o by measuring ferroelectric properties and crystal structure. The optimum performance of 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 is obtained by pre-sintering (Ba0.7Ca0.3)TiO3 gel at 300 C o , and its high-performance temperature range from −77 to 40 C o is about 1.7 times broader than that of the 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 ceramic sintered directly at 1250 C o . It is found that the contents of phase composition in the optimum sample are 63% for morphotropic phase boundary with x = 0.5, 18% for Rhombohedral phase, and 19% for Tetragonal phase. The pre-sintering approach not only maintains the excellent ferroelectric properties induced by the morphotropic phase boundary, but also broadens the applicable high-performance temperature range of the samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Recent developments on high Curie temperature PIN–PMN–PT ferroelectric crystals10.1016/j.jcrysgro.2010.11.043 ↗
2. Ceramic and single-crystal (1-x)PMN-xPT constitutive behavior under combined stress and electric field loading10.1016/j.actamat.2007.11.025 ↗
3. Analytical calculation of saturated strain near morphotropic phase boundary of polycrystalline ferroelectrics by the generalized inverse-pole-figure model10.1140/epjb/e2019-90559-2 ↗
4. Recent development in lead-free perovskite piezoelectric bulk materials10.1016/j.pmatsci.2018.06.002 ↗
5. Synthesis, structure and piezo-/ferroelectric properties of a novel bismuth-containing ternary complex perovskite solid solution10.1039/C7TC00571G ↗
6. Acoustic anomalies and phase transition behaviors of lead-free piezoelectric (Na1/2Bi1/2)TiO3-xBaTiO3 single crystals as revealed by BrillouinLight scattering10.3390/ma11061000 ↗
7. Evolution from successive phase transitions to “morphotropic phase boundary” in BaTiO3-based ferroelectrics10.1063/1.5028302 ↗
8. Enhanced ferroelectric and piezoelectric properties of (Bi1-xLax)FeO3-BaTiO3 ceramics near Morphotropic phase boundary10.1007/s10832-018-0155-9 ↗
9. Electrical properties of zirconium-modified BiScO3 -PbTiO3 piezoelectric ceramics at re-designed phase boundary10.1016/j.matlet.2017.12.036 ↗
10. Multiferroic nature of microwave-processed and sol-gel synthesized nano Pb1-xCoxTiO3 (x = 0.2–0.8) ceramics10.1002/crat.201800139 ↗
11. Structural, morphological, electrical, impedance and ferroelectric properties of BaO-ZnO-TiO2 ternary system10.1007/s41779-018-0225-0 ↗
12. Sol-gel synthesized and microwave heated Pb0.8-yLayCo0.2TiO3 (y = 0.2–0.8) nanoparticles: structural, morphological and dielectric properties10.1016/j.ceramint.2018.07.027 ↗
13. Structural and functional properties of sol-gel synthesized and microwave heated Pb0.8Co0.2-zLazTiO3 (z = 0.05–0.2) nanoparticles10.1016/j.ceramint.2018.07.176 ↗
14. Non-equilibrium strain relaxation noise in the relaxor ferroelectric (PbMg1/3Nb2/3O3)1-x(PbTiO3)x10.1063/1.5049816 ↗
15. Controlling mobility in perovskite oxides by ferroelectric modulation of atomic-scale interface structure10.1021/acs.nanolett.7b04715 ↗
16. A facile hot plate annealing at low temperature of Pb(Zr0.52Ti 0.48)O3 thin films by sol–gel method and their ferroelectric properties10.1007/s10854-018-8535-0 ↗
17. Complex morphotropic domain structure and piezo-/ferroelectric properties in high-TC ferroelectric single crystals of a ternary perovskite solid solution
18. Lead-free piezoceramics10.1038/nature03028 ↗
19. Polarization alignment, phase transition, and piezoelectricity development in polycrystalline 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO310.1103/PhysRevB.90.014103 ↗
20. Current status and prospects of lead-free piezoelectric ceramics10.1016/j.jeurceramsoc.2005.03.125 ↗
21. Large piezoelectric effect in Pb-free ceramics10.1103/PhysRevLett.103.257602 ↗
22. Phase transitions and the piezoelectricity around morphotropic phase boundary in Ba(Zr0.2Ti0.8)O3-x(Ba0.7Ca0.3)TiO3 lead-free solid solution10.1063/1.4899125 ↗
23. Exceptionally high piezoelectric coefficient and low strain hysteresis in grain-oriented (Ba, Ca)(Ti, Zr)O3 through integrating crystallographic texture and domain engineering10.1021/acsami.7b08160 ↗
24. Diffused phase transition boosts thermal stability of high-performance lead-free piezoelectrics10.1002/adfm.201504256 ↗
25. Major contributor to the large piezoelectric response in (1-x)Ba(Zr0.2Ti0.8)O3-x(Ba0.7Ca0.3)TiO3 ceramics: domain wall motion10.1063/1.4885675 ↗
26. Thermodynamics of ferroelectric solid solutions with morphotropic phase boundaries10.1111/jace.12979 ↗
27. Large strain and temperature-insensitive piezoelectric effect in high-temperature piezoelectric ceramics10.1039/C7TC04975G ↗
28. Synthesis and characterization of sol–gel derived (Ba,Ca)(Ti,Zr)O3 nanoparticles10.1007/s10854-011-0484-9 ↗
29. Effect of poling process on piezoelectric properties of sol–gel derived BZT–BCT ceramics10.1016/j.jeurceramsoc.2014.12.010 ↗
30. Triple-point-type morphotropic phase boundary based large piezoelectric Pb-free material—Ba(Ti0.8Hf0.2)O3-(Ba0.7Ca0.3)TiO310.1063/1.4724216 ↗
31. Ferroelectric domain structures near the MPB in (1-x)Pb(Zn 1/3Nb2/3)O3-xPbTiO310.1080/00150190601186890 ↗
32. Symmetry determination on Pb-free piezoceramic 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 using convergent beam electron diffraction method10.1063/1.4864130 ↗
33. Unique single-domain state in a polycrystalline ferroelectric ceramic10.1103/PhysRevB.89.100104 ↗
34. Domain disruption and defect accumulation during unipolar electric fatiguein a BZT-BCT ceramic10.1063/1.5008619 ↗
35. Optical, magnetic and ferroelectric properties of Ba 0.2Cu0.8-xLaxFe2O4 (x= 0.2–0.6) nanoparticles10.1016/j.ceramint.2019.01.044 ↗
36. Structural, morphological and optical properties of Ba1-xCuxTiO3 (X = 0.2, 0.4, 0.6, 0.8) nanoparticles synthesizedby hydrothermal method10.1016/j.matchemphys.2018.05.052 ↗
37. Barium titanate microspheres by low temperature hydrothermal method: studies on structural, morphological, and optical properties10.1080/21870764.2018.1439607 ↗