journal article·2026-02Open access

Intelligent porosity control in hydroxyapatite using fuzzy logic and electronic doping tuning for advanced biofunctional materials

P. Veeraragavan, M. Sridevi, P. Madhavasarma

Abstract

Hydroxyapatite (HAp), Ca 10 (PO 4 ) 6 (OH) 2 , closely resembles natural bone and is a bioactive ceramic, making it ideal for use as a scaffold in orthopaedic applications. The strength of the scaffold depends on porosity and sintering conditions. In this study, HAp was prepared and sintered up to 750 °C, resulting in a colour change from yellow to white. Further heating above this temperature provided no significant benefit. To avoid unnecessary high-temperature tests, a Mamdani-type fuzzy logic controller in MATLAB was used to predict porosity based on sintering temperature, grain size, and compressive strength. Simulation results showed that after HAp was fully densified at 1150 °C, the estimated porosity was 24.2 %. Electrical and chemical analyses of the samples were performed at 750 °C. Band energy analysis revealed that undoped HAp acts as an insulator with a ∼5.3 eV band gap. When doped with transition metals (Fe 2+ , Ti 4+ , Zn 2+ , Mg 2+ , Sr 2+ ), the band gap decreased to 2.5–3.5 eV, indicating semiconductor properties. This suggests the material could serve a dual purpose: as a biomedical scaffold and as a semiconductor platform when doped. Although natural bone was used as the initial material, it is not suitable for chip-scale processing. Future research should explore bio-derived options such as eggshell, coral, and bovine bone, which have similar calcium phosphate structures. These materials could provide scalable and renewable options for scaffold development and electronic applications. This preliminary work provides a foundation for dual-functional ceramic materials with tunable electronic and structural features.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Hydrogels: synthesis, properties, applications · Aerogels and thermal insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. The role of three-dimensional printing in healthcare and medicine
2. Engineering biomaterials to 3D-print scaffolds for bone regeneration: practical and theoretical considerations
3. Cumming · 2017
4. A review of process development steps for new material systems in three-dimensional printing (3DP)10.1016/j.jmapro.2009.03.002 ↗
5. IOT monitoring system of medical waste based on artificial intelligence
6. Experimental studies on 3D printing of automatically designed customized wrist-hand orthoses10.3390/ma13184091 ↗
7. Applications of machine learning in bone and mineral research10.3803/EnM.2021.1111 ↗
8. 3D printing applications in orthopaedic surgery: clinical experience and opportunities10.3390/app12073245 ↗
9. Solvent-cast 3D printing of magnesium scaffolds10.1016/j.actbio.2020.08.002 ↗
10. Application of 3D-printed orthopedic cast for the treatment of forearm fractures: finite element analysis and comparative clinical assessment
11. A study on 3D deep learning-based automatic diagnosis of nasal fractures10.3390/s22020506 ↗
12. A rapid and intelligent designing technique for patient-specific and 3D-printed orthopedic cast10.1186/s41205-016-0007-7 ↗
13. The use of low-intensity pulsed ultrasound bone stimulators for fractures of the hand and upper extremity10.1016/j.jhsa.2011.08.037 ↗
14. The effects of low-intensity pulsed ultrasound on fresh fracture: a meta-analysis
15. Polylactic acid (PLA) biocomposite: processing, additive manufacturing and advanced applications10.3390/polym13081326 ↗
16. 3D printing based on imaging data: review of medical applications10.1007/s11548-010-0476-x ↗
17. Custom design and fabrication of 3D printed cast for ankle immobilisation
18. Internet of things (IoT) applications in orthopaedics10.1016/j.jcot.2019.07.003 ↗
19. Tibia fracture healing prediction using first-order mathematical model
20. Determination of optimum voltage for tibia fracture across limb in patients treated using DC electric stimulation
21. Classification of tibia fracture across limb in patients treated using DC electric stimulation based on observed healing pattern
22. On electrical conduction in living bone10.1097/00003086-197501000-00045 ↗
23. Electrical properties of bone: a review10.1097/00003086-198406000-00042 ↗
24. Electrical and dielectric properties of wet human cortical bone as a function of frequency10.1109/10.184706 ↗
25. Assessing the impact of electrolyte conductivity and viscosity on the reactor cost and pressure drop of redox-active polymer flow batteries10.1016/j.jpowsour.2017.06.052 ↗
26. J.M.A. characterisation of natural hydroxyapatite extracted from bovine cortical bone ash
27. The application of fourier transform infrared spectroscopy to the analysis of burned bone10.1016/j.jas.2008.11.013 ↗
28. Significant precision in crystal structural details: Holly springs hydroxyapatite10.1107/S0567740869004298 ↗
29. Tibia fracture healing diagnosis: a review
30. Identification of time constant for healing process of limb with fractured tibia bone using step response techniques
31. An electrical stimulation data-based model to predict the healing period of fractured limb10.1080/13873954.2019.1651341 ↗
32. Artificial intelligence in fracture healing diagnosis
33. Tibia fracture healing prediction using adaptive neuro-fuzzy inference system
34. Comparative analysis of fracture healing predicted using mathematical model and soft computing technique
35. Bone mineral change during experimental heating: an X-ray scattering investigation10.1016/S0142-9612(03)00427-7 ↗
36. Collagen cross-links in mineralizing tissues: a review of their chemistry, function, and clinical relevance10.1016/S8756-3282(97)00279-2 ↗
37. Studies on physiochemical modifications on biologically important hydroxyapatite materials and their characterization for medical applications10.1016/j.bpc.2020.106474 ↗
38. Emerging liquid crystal displays based on the kerr effect10.1080/15421406.2010.486600 ↗
39. Studies on hall effect and conductivity measurement of natural human bones
40. Evaluating the effect of capacitance model on tibia fractured limb healing diagnosis
41. Classification of tibia fracture across limb in patients treated using DC electric stimulation based on observed healing pattern
42. Identification of time constant for healing process of limb with fractured tibia bone using step response techniques
43. Model-based tuning of controller for nonlinear hemispherical tank processes10.1080/10739140701653892 ↗
44. Model-based tuning for a nonlinear spherical tank with time delay process10.1080/10739140802151739 ↗
45. Electro conductivity of bone in vitro and in vivo10.1097/00003086-198310000-00041 ↗
46. Acceleration of fracture healing distal to a venous tourniquet10.2106/00004623-197456040-00008 ↗
47. Biomaterials, current strategies, and novel nanotechnological approaches for periodontal regeneration10.3390/jfb10010003 ↗
48. Pre-vascularization in fibrin gel/PLGA microsphere scaffolds designed for bone regeneration10.1038/s41427-018-0076-8 ↗
49. Effects of sintering temperature on structure of hydroxyapatite studied with Rietveld method10.1023/A:1025048724330 ↗
50. Nanotechnology and nanomaterials in dentistry
51. Biologically important non-linear optics crystal substitute for tibia fracture healing diagnosis
52. The impact of hydroxyapatite crystal structures and protein interactions on bone's mechanical properties10.1038/s41598-024-60701-7 ↗
53. Additive manufacturing of biomimetic porous hydroxyapatite scaffolds with hierarchical pore structures
54. Fabrication of chitosan–PLA hybrid scaffolds with controlled dual-scale porosity for bone tissue regeneration
55. Functionalization of 3D printed PLA/PEG composite scaffolds for enhanced cell adhesion and mechanical response
56. Bredigite-doped hydroxyapatite scaffolds prepared by DLP for controlled degradation and bioactivity
57. Hierarchical ceramic composites fabricated via additive manufacturing: microstructure–property correlation
58. 3D printed TPMS-based PLA/graphene oxide scaffolds: mechanical optimization and biological performance