Synthesis and optimization of a wide-bandgap Cu2ZnGe(S,Se)4 photovoltaic absorber using single-step sulfo-selenization: Effect of stacking order and annealing conditions
Source abstract
Abstract
Herein, we present a straightforward process for producing wide-bandgap Cu2ZnGe(S,Se)4 (CZGSSe) via single-step sulfo-selenization of a chalcogen-free sputtered Cu/Zn/Ge metallic stack. The influence of various annealing parameters on the structural and compositional properties of CZGSSe absorbers is investigated, and the solar cell performances are discussed. By analyzing the absorbers at critical points in the annealing profile through a combination of SEM imaging, X-ray diffraction, and Raman spectroscopy, we identified possible factors that constrain the growth and properties of the synthesized CZGSSe absorbers. The experimental observations revealed a strong correlation between the annealing conditions and the introduction of chalcogens (S and Se) into the final absorbers. However, the different thermodynamic properties of S and Se, as well as the position of the Ge layer in the metallic stack, have a significant impact on the obtained absorber properties. Altering the stacking order of the metallic precursor and optimizing the annealing parameters were found to be more beneficial, leading to better absorber properties. Additionally, the solar cells prepared using these absorbers demonstrated efficiencies close to those of the best-reported S-rich CZGSSe compounds. The results confirm the potential of the proposed process for producing CZGSSe solar cells through a simple and reliable method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
2. Pathways toward commercial perovskite/silicon tandem photovoltaics10.1126/science.adh3849 ↗
3. Solar cell efficiency tables (version 65)10.1002/pip.3867 ↗
4. Suppressing buried interface nonradiative recombination losses toward high‐efficiency antimony triselenide solar cells
5. Simultaneous band alignment modulation and carrier dynamics optimization enable highest efficiency in Cd‐free Sb2 Se3 solar cells
6. Perspective of environmentally friendly antimony selenide-based solar cell10.1063/5.0214349 ↗
7. Achieving over 4% efficiency for SnS/CdS thin-film solar cells by improving the heterojunction interface quality10.1039/D0TA06937J ↗
8. Na induction effects for J–V properties of Cu2SnS3 (CTS) solar cells and fabrication of a CTS solar cell over-5.2% efficiency10.1016/j.solmat.2021.111315 ↗
9. Progress and perspectives of thin film kesterite photovoltaic technology: a critical review10.1002/adma.201806692 ↗
10. Feasibility of exceeding 20% efficiency for kesterite/c-silicon tandem solar cells using an alternative buffer layer: optical and electrical analysis10.3390/nano14211722 ↗
11. Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells10.1038/s41560-022-01132-4 ↗
12. Sodium doping mechanism on sol-gel processed kesterite Cu2ZnSnS4 thin films10.1016/j.spmi.2018.05.018 ↗
13. Self‐powered broadband kesterite photodetector with ultrahigh specific detectivity for weak light applications10.1002/sus2.160 ↗
14. Charge separation enhancement enables record photocurrent density in Cu2 ZnSn(S,Se)4 photocathodes for efficient solar hydrogen production
15. Fabrication of monolithic CZTS/Si tandem cells by development of the intermediate connection10.1016/j.solener.2019.08.029 ↗
16. Voc deficit in kesterite solar cells10.1088/1674-4926/42/10/100201 ↗
17. Enhance the performance of CZTSSe solar cells through inhibiting the Cu2+ , tu, and (─COOH) association reaction
18. Mitigating Sn loss via anion substitution in the Cu2+ –Sn2+ precursor system for Cu2 ZnSn(S, Se)4 solar cells10.1039/D4TA04539D ↗
19. Suppressing element inhomogeneity enables 14.9% efficiency CZTSSe solar cells
20. Sn4+ precursor enables 12.4% efficient kesterite solar cell from DMSO solution with open circuit voltage deficit below 0.30 V10.1007/s40843-020-1408-x ↗
21. An effective precursor‐solutioned strategy for developing Cu2 ZnSn(S, Se)4 thin film toward high efficiency solar cell10.1002/aenm.202403950 ↗
22. Doping and alloying of kesterites
23. Potassium doping for grain boundary passivation and defect suppression enables highly-efficient kesterite solar cells
24. Unveiling the selenization reaction mechanisms in ambient air‐processed highly efficient kesterite solar cells10.1002/aenm.202300521 ↗
25. Control of the phase evolution of kesterite by tuning of the selenium partial pressure for solar cells with 13.8% certified efficiency10.1038/s41560-023-01251-6 ↗
26. Controllable double gradient bandgap strategy enables high efficiency solution‐processed kesterite solar cells
27. Introducing Bi2 S3 interlayer to synergistically modify Mo back contact and regulate bulk defects in kesterite solar cells10.1002/smll.202405382 ↗
28. Sputtering deposited and energy band matched ZnSnN2 buffer layers for highly efficient Cd‐free Cu2 ZnSnS4 solar cells10.1002/adfm.202402762 ↗
29. Cadmium‐free kesterite thin‐film solar cells with high efficiency approaching 12%10.1002/advs.202302869 ↗
30. Over 10% efficient Cu2 CdSnS4 solar cells fabricated from optimized sulfurization10.1002/adfm.202207470 ↗
31. Device postannealing enabling over 12% efficient solution‐processed Cu 2 ZnSnS 4 solar cells with Cd 2+ substitution10.1002/adma.202000121 ↗
32. Enhancing grain growth for efficient solution-processed (Cu,Ag)2 ZnSn(S,Se)4 solar cells based on acetate precursor10.1021/acsami.0c02629 ↗
33. Enhancement of open-circuit voltage of solution-processed Cu 2 ZnSnS 4 solar cells with 7.2% efficiency by incorporation of silver10.1021/acsenergylett.6b00509 ↗
34. Over 10% efficiency pure sulfide kesterite solar cells on transparent electrode with Cd–Ag Co‐alloying
35. Improved CZTSe solar cell efficiency via silver and germanium alloying10.1016/j.solener.2023.112247 ↗
36. Improving the performance of kesterite solar cells by solution germanium alloying10.1039/D4CP02398F ↗
37. Comprehensive study of photoluminescence and device properties in Cu2Zn(Sn1−xGex)S4 monograins and monograin layer solar cells10.1016/j.solmat.2024.113124 ↗
38. Setting the baseline for the modelling of Kesterite solar cells: the case study of tandem application10.1016/j.solmat.2022.112109 ↗
39. Investigation on limiting factors affecting Cu2ZnGeSe4 efficiency: effect of annealing conditions and surface treatment10.1016/j.solmat.2020.110701 ↗
40. Insights on the limiting factors of Cu2ZnGeSe4 based solar cells10.1016/j.solmat.2021.111106 ↗
41. Sn substitution by Ge: strategies to overcome the open-circuit voltage deficit of kesterite solar cells10.1021/acsaem.0c00763 ↗
42. Efficiency limits for single-junction and tandem solar cells10.1016/j.solmat.2006.06.002 ↗
43. Evaluation of different metal salt solutions for the preparation of solar cells with wide-gap Cu 2 ZnGeS x Se 4−x absorbers10.1039/C6RA23068G ↗
44. Routes to develop a [S]/([S]+[Se]) gradient in wide band-gap Cu2ZnGe(S,Se)4 thin-film solar cells10.1016/j.jallcom.2021.159253 ↗
45. Wide band gap Cu2ZnGe(S,Se)4 thin films and solar cells: influence of Na content and incorporation method10.1016/j.solener.2021.08.032 ↗
46. Evaluation of different metal salt solutions for the preparation of solar cells with wide-gap Cu 2 ZnGeS x Se 4−x absorbers10.1039/C6RA23068G ↗
47. Evaluation of different buffer materials for solar cells with wide-gap Cu 2 ZnGeS x Se 4−x absorbers10.1039/C7RA06438A ↗
48. Uncovering details behind the formation mechanisms of Cu 2 ZnGeSe 4 photovoltaic absorbers10.1039/C9TC06728K ↗
49. Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact10.1038/am.2017.103 ↗
50. The crystal structure of kesterite type compounds: a neutron and X-ray diffraction study10.1016/j.solmat.2011.01.002 ↗
51. Selenium and Sulphur replacement dynamics in CZTSSe and CZGSSe kesterite materials
52. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1−x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
53. First principles calculation of the electronic properties and lattice dynamics of Cu2ZnSn(S1−xSex)410.1063/1.4728232 ↗
54. The steady rise of kesterite solar cells10.1021/acsenergylett.7b00131 ↗
55. Limitation factors for the performance of kesterite Cu 2 ZnSnS 4 thin film solar cells studied by defect characterization10.1039/C5RA00069F ↗
56. Growth mechanism of Ge-doped CZTSSe thin film by sputtering method and solar cells10.1039/C6CP05671G ↗
57. ZnS grain size effects on near-resonant Raman scattering: optical non-destructive grain size estimation10.1039/c3ce42578a ↗
58. Controlling the anionic ratio and gradient in kesterite technology10.1021/acsami.1c21507 ↗
59. Sulfurization of co-evaporated Cu2ZnGeSe4 layers: influence of the precursor cation's ratios on the properties of Cu2ZnGe(S,Se)4 thin films10.1016/j.solmat.2023.112243 ↗
60. ChemInform abstract: copper‐containing group IV and group V chalcogenides10.1002/chin.199148289 ↗
61. Resonant Raman scattering of ZnS x Se 1−x solid solutions: the role of S and Se electronic states10.1039/C5CP04498G ↗
62. Energy band alignment and defect synergistic regulation enable air‐solution‐processed kesterite solar cells with the lowest VOC deficit
63. Compositional dependence of structural and electronic properties of Cu 2 ZnSn(S,Se) 4 alloys for thin film solar cells
64. CZTSSe solar cell efficiency improvement using a new band-gap grading model in absorber layer10.1007/s00339-017-1371-x ↗
65. Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells10.1038/s41560-022-01132-4 ↗