Hydrothermally Modified 3D Porous Loofah Sponges with MoS₂ Sheets and Carbon Particles for Efficient Solar Steam Generation and Seawater Desalination

Although the emerging interfacial solar steam generation technology is sustainable and eco-friendly for generating clean water by desalinating seawater and purifying wastewaters, salt deposition on the evaporation surface during solar-driven evaporation severely degrades the purification performances and adversely affect the long-term performance stability of solar steam generation devices. Herein, to construct solar steam generators for efficient solar steam generation and seawater desalination, three-dimensional (3D) natural loofah sponges with both macropores of the sponge and microchannels of the loofah fibers are hydrothermally decorated with molybdenum disulfide (MoS 2 ) sheets and carbon particles. Benefiting from fast upward transport of water, rapid steam extraction, and effective salt-resistant capacity, the 3D hydrothermally decorated loofah sponge with MoS 2 sheets and carbon particles (HLMC) with an exposed height of 4 cm can not only obtain heat by its top surface under the downward solar light irradiation based on the solar–thermal energy conversion but also gain environmental energy by its porous sidewall surface, achieving a competitive water evaporation rate of 3.45 kg m –2 h –1 under 1 sun irradiation. Additionally, the 3D HLMC evaporator exhibits long-term desalination stability during the solar-driven desalination of an aqueous salt solution with 3.5 wt % NaCl for 120 h without apparent salt deposition because of its dual type of pores and uneven structure distribution.