Excellent Biofouling Alleviation of Thermoexfoliated Vermiculite Blended Poly(ether sulfone) Ultrafiltration Membrane

Flux and antifouling properties of mixed matrix membranes (MMMs) are yet to attain satisfactory status. The objective of this study is to find a method for mitigating the biofouling of poly(ether sulfone) (PES) ultrafiltration membranes via blending of thermoexfoliated vermiculite (VMT). Flow cytometry analysis shows that the behaviors of Bacillus subtilis 168 as a Gram-positive bacterium and Escherichia coli DH5 alpha as a Gram-negative bacterium were different. Hence, cell property is a suspected contributory factor in biofilm formation. Accordingly, considering the local predominant bacterial strains, a regionally customized membrane could scientifically be an expert solution for biofouling mitigation. Fabricated composite membranes have shown a higher flux compared to control PES membrane. Among all composite membranes, the PES-VMT0.10 had the highest flux of 476.4 L/(m 2 h) (LMH) before fouling, and the highest flux of 210.7 LMH after three cycles of usage. In addition, the rejection rate of the PES-VMT0.15 The bovine serum albumin (BSA) sample was >77%, while that of the PES-VMT0.10 was >84%. The results of the static BSA adsorption test and the bacterial attachment test indicated that the membranes with macro-roughness on their surface showed better antibiofouling resistance. The antifouling properties of the modified membranes were also improved, because of their optimal wettability. On one hand, the hydrophilicity of membranes caused damaging both Gram-positive and Gram-negative bacteria and bacteriocidal effect. On the other hand, BSA adsorption and bacterial attachment on the membrane surface were affected by pore diameter.