journal article·2026-03Open access

Robust adhesion between solid-state hydroxyapatite and bone tissue through surface demineralization

Shichao Xie, Masahiro Okada, Haruyuki Aoyagi, Akihisa Otaka, Xiaofeng Yang, Takayoshi Nakano, Takuya Matsumoto

Abstract

Current bone adhesives typically lack adequate mechanical strength, long-term stability, or biocompatibility. To address these limitations, we designed a new adhesion strategy using a solid-state hydroxyapatite (HAp) adhesive in combination with bone surface demineralization. Solid-state HAp adhesives were synthesized via wet chemical precipitation and heat treatment. Cortical bone specimens were partially demineralized with phosphoric acid (H 3 PO 4 ) or ethylenediaminetetraacetic acid (EDTA), and characterized using scanning electron microscopy (SEM) and attenuated total reflectance–Fourier transform infrared spectroscopy (ATR-FTIR). Shear adhesion strength of HAp to demineralized bone was measured over time. In vivo fixation was assessed in rats using micro-computed tomography and histology. Statistical analysis used Tukey-Kramer tests after normality and variance checks. Although the HAp adhesive failed to adhere to non-demineralized bone, effective adhesion was achieved on the surface-demineralized bone tissue. Shear adhesion strength was significantly higher in EDTA-treated samples (238.4 kPa at 10 h) compared to H 3 PO 4 -treated samples (102.9 kPa at 1 h), with performance correlating with demineralization depth. ATR-FTIR and SEM analyses revealed that EDTA preserved collagen's triple-helix structure and free water content, both enhancing adhesion. Animal experiments confirmed stable fixation of HAp adhesive to demineralized bone tissue. Surface demineralization enabled strong adhesion of the solid-state HAp adhesive to bone by exposing collagen swollen with water. Adhesion strength was influenced by structural changes in the demineralized layer, and the adhesive provided stable in vivo fixation, supporting its potential for bone-anchored biomedical applications. • Porous hydroxyapatite (HAp) adhered directly to surface-demineralized bone tissue. • Shear adhesion strength reached 102.9 kPa under optimal in vitro H 3 PO 4 demineralization conditions. • Stable adhesion of HAp adhesive to rat femurs was confirmed in vivo . • Adhesion depended on demineralization depth and collagen matrix structure. • Hydrating water structure on bone surfaces also influenced adhesive performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Polymer Surface Interaction Studies · Surgical Sutures and Adhesives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Design of a biodegradable plate for femoral shaft fracture fixation10.1016/j.medengphy.2020.05.010 ↗
2. Development of an implantable sensor system for in vivo strain, temperature, and pH monitoring: comparative evaluation of titanium and resorbable magnesium plates
3. Biomechanical assessment and quantification of femur healing process using fibre bragg grating strain sensors10.1016/j.sna.2022.113930 ↗
4. Additive manufacturing-based design approaches and challenges for orthopaedic bone screws: a state-of-the-art review10.1007/s40430-021-03331-8 ↗
5. Bone adhesive materials: from bench to bedside
6. Kirillova
7. A biodegradable supramolecular adhesive with robust instant wet adhesion for urgent hemostasis and wound repair10.1002/adfm.202401529 ↗
8. Mechanical and bioactive properties of PMMA bone cement: a review10.1021/acsbiomaterials.4c00779 ↗
9. Poly (methyl methacrylate) in orthopedics: strategies, challenges, and prospects in bone tissue engineering10.3390/polym16030367 ↗
10. Effect of collagen sponge and fibrin glue on bone repair10.1590/1678-775720150374 ↗
11. An in vitro and in vivo analysis of fibrin glue use to control bone morphogenetic protein diffusion and bone morphogenetic protein–stimulated bone growth10.1016/j.spinee.2005.11.006 ↗
12. Overcoming the dilemma of in vivo stable adhesion and sustained degradation by the molecular design of polyurethane adhesives for bone fracture repair10.1002/adhm.202301870 ↗
13. High-strength bone polyurethane adhesive with rapid curing for bone tissue injury repair10.1039/D4TB02390K ↗
14. Viscoelastic and biological performance of low-modulus, reactive calcium phosphate-filled, degradable, polymeric bone adhesives10.1016/j.actbio.2011.08.008 ↗
15. Bone‐adhesive hydrogels based on dual crosslinked poly (2‐Oxazoline)s10.1002/mabi.202100257 ↗
16. Elastic mechanical properties of 45S5-Based bioactive glass–ceramic scaffolds10.3390/ma12193244 ↗
17. Calcium phosphate-based biomaterials for bone repair10.3390/jfb13040187 ↗
18. Bioceramics and bone healing10.1302/2058-5241.3.170056 ↗
19. Biocompatible nanostructured solid adhesives for biological soft tissues10.1016/j.actbio.2017.05.014 ↗
20. Water-mediated On-Demand detachable solid-state adhesive of porous hydroxyapatite for internal organ retractions10.1002/adhm.202304616 ↗
21. Biopolymeric nanocomposite scaffolds for bone tissue engineering applications–A review
22. Bone: an outstanding composite material10.3390/app12073381 ↗
23. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review10.1016/j.biomaterials.2016.01.012 ↗
24. Dermal architecture and collagen type distribution10.1007/BF00562732 ↗
25. State of the art etch-and-rinse adhesives10.1016/j.dental.2010.10.016 ↗
26. Comparison of different protocols for demineralization of cortical bone10.1038/s41598-021-86257-4 ↗
27. A method for rapid demineralization of teeth and bones10.2174/1874210601004010223 ↗
28. Respiratory effects of occupational exposure to low concentration of hydrochloric acid among exposed workers10.4103/2045-9912.273958 ↗
29. Formic acid burn—Local and systemic effects report of a case10.1016/0305-4179(83)90084-0 ↗
30. Validity of the use of porcine bone in forensic cut mark studies10.1111/1556-4029.14599 ↗
31. Adhesion between a viscoelastic material and a solid surface10.1021/ma021759t ↗
32. Use of a new adhesive film for the preparation of multi-purpose fresh-frozen sections from hard tissues, whole-animals, insects and plants10.1679/aohc.66.123 ↗
33. Real-time synchronous measurement of curing characteristics and polymerization stress in bone cements with a cantilever-beam based instrument10.1063/1.5025476 ↗
34. Temporal analysis of rat growth plates: cessation of growth with age despite presence of a physis10.1177/002215540305100312 ↗
35. A comparison of mechanical properties derived from multiple skeletal sites in mice10.1016/j.jbiomech.2004.04.020 ↗
36. Stress analysis of adhesive-bonded lap joints10.1243/03093247V093185 ↗
37. Effect of the geometry in the strength of single-lap adhesive joints of composite laminates under uniaxial tensile load10.1016/j.ijadhadh.2016.10.009 ↗
38. Structural mechanisms in soft fibrous tissues: a review
39. Characterisation of the tensile properties of demineralised cortical bone when used as an anterior cruciate ligament allograft10.1016/j.jmbbm.2020.103981 ↗
40. Demineralized bone matrix in bone repair: history and use10.1016/j.addr.2012.06.008 ↗
41. The effect of hydrochloric acid on microstructure of porcine (sus scrofa domesticus) cortical bone tissue10.1016/j.forsciint.2018.08.030 ↗
42. X-ray diffraction studies of a partially demineralized oriented cortical bone with the controlled depth of analysis10.1016/j.heliyon.2023.e17809 ↗
43. Kinetic studies of bone demineralization at different HCl concentrations and temperatures10.1016/j.msec.2010.11.003 ↗
44. Biochemical bone metabolism markers and morphometric, densitometric and biomechanical properties of femur and tibia in female and gonadectomised Male Polish landrace pigs
45. Deriving tissue density and elastic modulus from microCT bone scans10.1016/j.bone.2011.07.021 ↗
46. Physicochemical properties of buffers used in simulated biological fluids with potential application for in vitro dissolution testing: a mini-review, dissolut
47. Effects of acid concentration and the UHP pretreatment on the gelatinisation of collagen and the properties of extracted gelatins10.1111/ijfs.13089 ↗
48. Fabrication of films with tailored properties by regulating the swelling of collagen fiber through pH adjustment10.1016/j.foodhyd.2020.106016 ↗
49. Nanoscale characterization of acid and thermally treated collagen fibrils10.1016/j.actbio.2012.05.029 ↗
50. Biomimetic intrafibrillar mineralization of type I collagen with intermediate precursors-loaded mesoporous carriers
51. Host-derived loss of dentin matrix stiffness associated with solubilization of collagen10.1002/jbm.b.31295 ↗
52. Analysis of type I and IV collagens by FT-IR spectroscopy and imaging for a molecular investigation of skeletal muscle connective tissue10.1007/s00216-006-0828-0 ↗
53. Mineralization generates megapascal contractile stresses in collagen fibrils10.1126/science.abm2664 ↗
54. Effects of mineralization on the hierarchical organization of Collagen—a synchrotron X-ray scattering and polarized second harmonic generation study10.1098/rsfs.2023.0046 ↗
55. In vitro mineralization of collagen in demineralized fish bone10.1002/macp.200400066 ↗
56. Structural changes in collagen fibrils across a mineralized interface revealed by cryo-TEM10.1016/j.bone.2015.04.020 ↗
57. The consequences of dehydration-hydration on bone anisotropy and implications on the sublamellar organization of mineralized collagen fibrils10.1016/j.jbiomech.2020.109737 ↗
58. The roles of water molecules at the biointerface of medical polymers10.1038/pj.2012.229 ↗
59. Infrared spectroscopy of proteins10.1016/j.bbabio.2007.06.004 ↗
60. Heterogeneous structure and dynamics of water in a hydrated collagen microfibril10.1021/acs.biomac.4c00183 ↗
61. Water retention capabilities of collagen, gelatin and peptide as studied by IR/QCM/RH system10.1016/j.saa.2020.118619 ↗
62. On the role of water in regulating the mechanics of collagen fibers10.1016/j.colsurfa.2024.134957 ↗
63. Bonding ability of 4-META self-etching primer used with 4-META/MMA-TBB resin to enamel and dentine: primary vs permanent teeth10.1016/j.jdent.2014.01.007 ↗
64. Phosphate toxicity: new insights into an old problem10.1042/CS20100377 ↗
65. Metabolic abnormalities associated with phosphoric acid ingestion10.1016/S0196-0644(87)80532-2 ↗
66. Viscosity of aqueous solutions of phosphoric acid at 25°C10.1021/i460003a028 ↗
67. A method to screen and evaluate tissue adhesives for joint repair applications10.1186/1471-2474-13-175 ↗
68. Creating a box-cavity defect model in the cortical bone of Rat Femora
69. Et, al., Osteoblast/fibroblast coculture derived bioactive ECM with unique matrisome profile facilitates bone regeneration
70. The periosteum: what is it, where is it, and what mimics it in its absence?10.1007/s00256-009-0849-9 ↗
71. Comparison of bone-to-implant contact and bone volume around implants placed with or without site preparation: a histomorphometric study in rabbits10.1038/s41598-020-69455-4 ↗
72. A review of fibrin and fibrin composites for bone tissue engineering10.2147/IJN.S124671 ↗