Source abstract
Abstract
The hierarchical nacre-like three-dimensional (3D) assembly of porous and lightweight materials is in high demand for applications such as sensors, flexible energy storage and harvesting devices, electromagnetic interference shielding, and biomedical applications. However, designing such a biomimetic hierarchical architecture is highly challenging due to the lack of experimental approaches to achieve the necessary control over the materials’ microstructure on the multilength scale. Aerogels and foam-based materials have recently been developed as attractive candidates for pressure-sensing applications. However, despite recent progress, the bottleneck for these materials to achieve electrical conductivity combined with high mechanical flexibility and fast strain recovery remains. In this study, for the first time, inspired by the multiscale architecture of nacre, we fabricated a series of ultra-lightweight, flexible, electrically conductive, and relatively high-strength composite foams through hybridizing the cross-linked silk fibroin (SF) biopolymer, extracted from Bombyx mori silkworm cocoon, reinforced with two-dimensional graphene oxide (GO) and Ti3C2 MXene nanosheets. Nacre is a naturally porous material with a lightweight, mechanically robust network structure, thanks to its 3D interconnected lamella-bridge micromorphology. Inspired by this material, we assemble a cross-linked SF fibrous solution with MXene and GO nanosheets into nacre-like architecture using a bidirectional freeze-casting technique. Subsequent freeze-drying and gas-phase hydrophobization resulted in composite foams with 3D hierarchical porous architectures with a unique combination of mechanical resilience, electrical conductance, and ultra-lightness. The developed composite presented excellent performances as piezoresistive pressure-sensing devices and sorbents for oil/water separation, which indicated great potential in mechanically switchable electronics.
Source: openalex_inverted_index · Quality: baseline
Affiliations
GE Renewable Energy, General Electric, 48499 Salzbergen, Germany
Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne, Greinstraße 6, 50939 Cologne, Germany
University of Applied Sciences Upper Austria, Stelzhamerstraße 23, 4600 Wels, Austria
Aachen-Maastricht Institute for Biobased Materials (AMIBM), Faculty of Science and Engineering, Maastricht University, 6167 RD Geleen, The Netherlands
Department of Biohybrid and Medical Textiles (BioTex), AME-Helmholtz Institute for Biomedical Engineering, RWTH Aachen University, 52074 Aachen, Germany
Department of Mechanical and Energy Engineering and Integrated Nanosystems Development Institute, Purdue School of Engineering and Technology, Indiana University−Purdue University Indianapolis, Indianapolis, Indiana 46202, United States
Funding
European Regional Development Fund · Deutsches Zentrum f??r Luft- und Raumfahrt · Federal Government of Upper Austria · Chemical Industry Fund · Association of the Chemical Industry