Bioactivation of titanium dioxide scaffolds by ALP-functionalization
Source abstract
Abstract
Three dimensional TiO2 scaffolds are receiving renewed attention for bone tissue engineering (TE) due to their biocompatibility and attractive mechanical properties. However the bioactivity of these scaffolds is comparatively lower than that of bioactive glass or hydroxyapatite (HA) scaffolds. One strategy to improve bioactivity is to functionalize the surface of the scaffolds using biomolecules. Alkaline phosphatase (ALP) was chosen in this study due to its important role in the bone mineralization process. The current study investigated the ALP functionalization of 3D titanium dioxide scaffolds using self-polymerization of dopamine. Robust titanium scaffolds (compressive strength∼2.7 ± 0.3 MPa) were produced via foam replica method. Enzyme grafting was performed by dip-coating in polydopamine/ALP solution. The presence of ALP was indirectly confirmed by contact angle measurements and enzymatic activity study. The influence of the enzyme on the bioactivity, e.g. hydroxyapatite formation on the scaffold surface, was measured in simulated body fluid (SBF). After 28 days in SBF, 5 mg ALP coated titania scaffolds exhibited increased hydroxyapatite formation. It was thus confirmed that ALP enhances the bioactivity of titania scaffolds, converting an inert bioceramic in an attractive bioactive system for bone TE.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthodontics and Dentofacial Orthopedics · Calcium Carbonate Crystallization and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Synergy between myogenic and non-myogenic cells in a 3D tissue-engineered craniofacial skeletal muscle construct10.1002/term.112 ↗
2. Loadable TiO2 scaffolds—a correlation study between processing parameters, micro CT analysis and mechanical strength10.1016/j.jeurceramsoc.2009.03.017 ↗
3. Physical and biocompatibility studies of novel titanium dioxide doped phosphate-based glasses for bone tissue engineering applications10.1007/s10856-007-3079-5 ↗
4. The potential impact of bone tissue engineering in the clinic10.2217/rme-2016-0042 ↗
5. Ultra-porous titanium oxide scaffold with high compressive strength10.1007/s10856-010-4142-1 ↗
6. Bioresorbable and bioactive polymer/Bioglass® composites with tailored pore structure for tissue engineering applications10.1016/S0266-3538(03)00275-6 ↗
7. 17 Grundlagen des tissue engineering
8. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
9. Third-generation biomedical materials10.1126/science.1067404 ↗
10. Biomaterials for bone tissue engineering10.1016/S1369-7021(08)70086-5 ↗
11. Functionalized ceramics for biomedical, biotechnological and environmental applications10.1016/j.actbio.2013.03.036 ↗
12. Surface characteristics of a self-polymerized dopamine coating deposited on hydrophobic polymer films10.1021/la202877k ↗
13. Gentamicin and bone morphogenic protein-2 (BMP-2)-delivering heparinized-titanium implant with enhanced antibacterial activity and osteointegration10.1016/j.bone.2012.01.007 ↗
14. 1-Step versus 2-step immobilization of alkaline phosphatase and bone morphogenetic Protein-2 onto implant surfaces using polydopamine10.1089/ten.tec.2012.0313 ↗
15. In vitro response to alkaline phosphatase coatings immobilized onto titanium implants using electrospray deposition or polydopamine-assisted deposition10.1002/jbm.a.34776 ↗
16. Mussel-inspired surface chemistry for multifunctional coatings10.1126/science.1147241 ↗
17. Ovid: externer link
18. Alkaline phosphatase grafting on bioactive glasses and glass ceramics10.1016/j.actbio.2009.06.025 ↗
19. Alkaline phosphatase activity in the periodontal ligament and gingiva of the rat molar: its relation to cementum formation10.1177/00220345950740070901 ↗
20. Electrosprayed enzyme coatings as bioinspired alternatives to bioceramic coatings for orthopedic and oral implants10.1002/adfm.200800819 ↗
21. Effects of alkaline phosphatase on bone healing around plasma-sprayed titanium implants: a pilot study in rabbits10.1016/0142-9612(96)87288-7 ↗
22. 45S5 Bioglass®-derived glass–ceramic scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.11.025 ↗
23. TiO2 foams with poly-(d,l-lactic acid) (PDLLA) and PDLLA/Bioglass® coatings for bone tissue engineering scaffolds10.1007/s10853-008-2858-9 ↗
24. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
25. Haugen · J. Eur. Ceram. Soc. · 2004 · 24 · 66110.1016/S0955-2219(03)00255-3 ↗
26. Formation and adhesion of biomimetic hydroxyapatite deposited on titanium substrates10.1016/j.actbio.2007.03.006 ↗
27. Anatase TiO2 nanoparticles on rutile TiO2 nanorods: a heterogeneous nanostructure via layer-by-layer assembly10.1021/la7018023 ↗
28. Yuan · Surf. Sci. Tech. · 2013 · 51
29. The use and misuse of FTIR spectroscopy in the determination of protein structure10.3109/10409239509085140 ↗
30. Surface modification of Ti-6Al-4V alloy for biomineralization and specific biological response: Part I, inorganic modification10.1007/s10856-011-4246-2 ↗
31. An in vitro evaluation of the Ca/P ratio for the cytocompatibility of nano-to-micron particulate calcium phosphates for bone regeneration10.1016/j.actbio.2008.02.025 ↗
32. The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering10.1016/j.biomaterials.2009.09.063 ↗
33. A novel ultra-porous titanium dioxide ceramic with excellent biocompatibility10.1177/0885328209354925 ↗
34. Ceramic TiO2-foams: characterisation of a potential scaffold10.1016/S0955-2219(03)00255-3 ↗
35. Simulation of tissue differentiation in a scaffold as a function of porosity, Young's modulus and dissolution rate: application of mechanobiological models in tissue engineering10.1016/j.biomaterials.2007.09.003 ↗
36. Optimising bioactive glass scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.07.017 ↗
37. Titanium dioxide (TiO2) nanoparticles filled poly(d,l lactic acid) (PDLLA) matrix composites for bone tissue engineering10.1007/s10856-006-0062-5 ↗
38. Electrically active and 3D porous TiO2-x ceramic scaffolds for bone tissue regeneration10.1016/j.jeurceramsoc.2016.09.032 ↗
39. Bioactive materials10.1016/0272-8842(95)00126-3 ↗
40. The role of alkaline phosphatase in cartilage mineralization10.1016/0169-6009(92)90750-8 ↗
41. Improvement of mechanical and biological properties of porous CaSiO3 scaffolds by poly(d,l-lactic acid) modification10.1016/j.actbio.2007.08.010 ↗
42. UV-enhanced bioactivity and cell response of micro-arc oxidized titania coatings10.1016/j.actbio.2008.03.005 ↗
43. Mussel-inspired polydopamine coating as a universal route to hydroxyapatite crystallization10.1002/adfm.200902347 ↗