Copper(0) Nanoparticles Supported on Silica-Coated Cobalt Ferrite Magnetic Particles: Cost Effective Catalyst in the Hydrolysis of Ammonia-Borane with an Exceptional Reusability Performance

Herein we report the development of a new and cost-effective nanocomposite catalyst for the hydrolysis of ammonia-borane (NH(3)BH(3)), which is considered to be one of the most promising solid hydrogen carriers because of its high gravimetric hydrogen storage capacity (19.6% wt) and low molecular weight. The new catalyst system consisting of copper nanoparticles supported on magnetic SiO(2)/CoFe(2)O(4) particles was reproducibly prepared by wet-impregnation of Cu(II) ions on SiO(2)/CoFe(2)O(4) followed by in situ reduction of the Cu(II) ions on the surface of magnetic support during the hydrolysis of NH(3)BH(3) and characterized by ICP-MS, XRD, XPS, TEM, HR-TEM and N(2) adsorption-desorption technique. Copper nanoparticles supported on silica coated cobalt(II) ferrite SiO(2)/CoFe(2)O(4) (CuNPs@SCF) act as highly active catalyst in the hydrolysis of ammonia-borane, providing an initial turnover frequency of TOF = 2400 h(-1) at room temperature, which is not only higher than all the non-noble metal catalysts but also higher than the majority of the noble metal based homogeneous and heterogeneous catalysts employed in the same reaction. More importantly, they were easily recovered by using a permanent magnet in the reactor wall and reused for up to 10 recycles without losing their inherent catalytic activity significantly, which demonstrates the exceptional reusability of the CuNPs@SCF catalyst.