Enhanced Electrical Performance and Bias Stability of a-IGZO Thin-Film Transistor by Ultrasonicated Pre-annealing
Source abstract
Abstract
Vacuum-processed oxide semiconductors have enabled incredible recent advances in the scientific research of metal oxide thin-film transistors (TFTs) and their introduction in commercial displays. Developing metal oxide transistors with low processing temperatures, on the other hand, remains a challenge. Metal oxide transistors are commonly produced at high processing temperatures (over 500°C) and have a high working voltage (30~50 V). Here, we introduce amorphous indium-gallium-zinc-oxide (a-IGZO) TFTs that show enhanced electrical characteristics, environmental stability, and switching behavior, prepared using ultrasonicated pre-annealing. Before post-annealing, the ultrasonication treatment was given at 40 kHz for 20 minutes. The improved electrical characteristics of this ultrasonicated a-IGZO TFTs were: 10.78 cm2/Vs; 1.2×107 on/off current ratio. The a-IGZO TFTs with ultrasonicated pre-annealing were also extremely stable under a variety of stresses. For an ultrasonicated a-IGZO TFT, the threshold voltage (Vth) shifted by +0.82 V in a positive bias stress test and -0.30 V in a negative bias stress test. This means that the sonication treatment improves both electrical and surface morphological qualities, while also lowering faults by eliminating contaminants from the a-IGZO channel layer's surface and preventing atomic rearrangement. Furthermore, the dynamic response characteristics were measured according to frequency. A dynamic inverter test was carried out at 1 kHz frequency, with the load resistance of the circuit set to 10 MW and the drain supply voltage set to 5 V (VDD).
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Electrical and Thermal Properties of Materials · CCD and CMOS Imaging Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. 10.1038/s41598-018-32233-410.1038/s41598-018-32233-4 ↗
2. 10.3365/KJMM.2021.59.3.16210.3365/KJMM.2021.59.3.162 ↗
3. 10.1007/s42341-020-00275-z10.1007/s42341-020-00275-z ↗
4. 10.1007/s13391-021-00274-z10.1007/s13391-021-00274-z ↗
5. 10.1007/s13391-021-00296-710.1007/s13391-021-00296-7 ↗
6. 10.1080/15980316.2010.966584510.1080/15980316.2010.9665845 ↗
7. 10.1109/LED.2017.277629610.1109/LED.2017.2776296 ↗
8. 10.1002/adhm.20140054610.1002/adhm.201400546 ↗
9. 10.1063/1.278396110.1063/1.2783961 ↗
10. 10.1002/aelm.20170055010.1002/aelm.201700550 ↗
11. 10.1021/acsami.8b0695610.1021/acsami.8b06956 ↗
12. 10.1109/LED.2018.283959510.1109/LED.2018.2839595 ↗
13. 10.1109/JSEN.2016.263952510.1109/JSEN.2016.2639525 ↗
14. 10.1109/LED.2015.242289510.1109/LED.2015.2422895 ↗
15. 10.1109/LED.2009.203339210.1109/LED.2009.2033392 ↗
16. 10.1063/1.502208810.1063/1.5022088 ↗
17. 10.1063/1.500366210.1063/1.5003662 ↗
18. 10.1109/TED.2020.301771810.1109/TED.2020.3017718 ↗
19. 10.1109/TED.2017.271744410.1109/TED.2017.2717444 ↗
20. 10.1063/1.500719110.1063/1.5007191 ↗
21. 10.1016/j.sse.2016.09.01010.1016/j.sse.2016.09.010 ↗
22. 10.1016/j.ultsonch.2018.07.04210.1016/j.ultsonch.2018.07.042 ↗
23. 10.1016/j.ultsonch.2021.10573510.1016/j.ultsonch.2021.105735 ↗
24. 10.1103/PhysRevResearch.2.02335010.1103/PhysRevResearch.2.023350 ↗
25. 10.1103/PhysRevE.88.02300610.1103/PhysRevE.88.023006 ↗
26. 10.1039/C6CP07456A10.1039/C6CP07456A ↗
27. 10.1021/cm404194n10.1021/cm404194n ↗
28. 10.1063/1.10870910.1063/1.108709 ↗
29. 10.1063/1.240324110.1063/1.2403241 ↗
30. 10.1063/1.492709810.1063/1.4927098 ↗
31. 10.1063/1.487901510.1063/1.4879015 ↗
32. 10.1063/1.283032910.1063/1.2830329 ↗
33. 10.1109/LED.2018.279166410.1109/LED.2018.2791664 ↗
34. 10.1063/1.487331610.1063/1.4873316 ↗
35. 10.1109/TDMR.2010.209650810.1109/TDMR.2010.2096508 ↗