journal article·2014-09-05

Degradation of a nano-thick Cu/Pt bilayered catalytic layer with an electrolyte in dye sensitized solar cells

Ohsung Song, Yunyoung Noh

Publisher page

Abstract

Abstract A 0.45 cm 2 DSSC device with a glass/FTO/blocking layer/TiO 2 /N719(dye)/electrolyte/50 nm-Pt/50 nm-Au/FTO/glass was prepared to examine the stability of the Au/Pt bilayered counter electrode (CE) with electrolyteand the energy conversion efficiency (ECE) of dye-sensitized solar cells (DSSCs). For comparison, a 100 nm-thick Pt only CE DSSC was also prepared using the same method. The photovoltaic properties, such as the short circuitcurrent density (J sc ), open circuit voltage (V oc ), fill factor (FF), and ECE, were checked using a solar simulator andpotentiostat with time after assembling the DSSC. The microstructure of the Au/Pt bilayer was examined by optical microscopy after 0∼25 minutes. The ECE of the Pt only CE-employed DSSC was 4.60 %, which did not show timedependence. On the other hand, for the Au/Pt CE DSSC, the ECEs after 0, 5 and 15 minutes were 5.28 %, 3.64% and 2.09 %, respectively. The corrosion areas of the Au/Pt CE determined by optical microscopy after 0, 5, and25 minutes were 0, 21.92 and 34.06 %. These results confirmed that the ECE and catalytic activity of Au/Pt CE decreased drastically with time. Therefore, a Au/Pt CE-employed DSSC may be superior to the Pt only CE-employedone immediately after integration of the device, but it would degrade drastically with time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Chalcogenide Semiconductor Thin Films · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.