Sintering Behavior and Thermal Properties of Cu-Graphite Materials by a Spark Plasma Sintering Method
Source abstract
Abstract
The use of heat dissipation materials in various field such as power semiconductor device, LED and microelectronic system. Therefore, there is a need for heat dissipation materials using copper (Cu) and graphite (Gr). These materials have high thermal conductivity. In particular, graphite has high thermal stability with a low coefficient of thermal expansion. This study was conducted to enhance the thermal properties of Cu for use in heat dissipation materials, using a spark plasma sintering method. Cu-Gr powders were mixed by a shaking mixer and fabricated with volume fractions of 7:3, 6:4, 5:5, 4:6 and 3:7. The spark plasma sintering method is a uniaxial pressurization process, which can control the direction of Gr. The Cu-Gr powders were sintered at a temperature of 850 oC at a heating rate of 30 oC/min and a sintering pressure of 40MPa. Consequently, as the Gr contents were increased, the relative densities of the Cu-Gr composites decreased from 99.25 to 94.85%. Gr has high resistance to high-temperature deformation, which contributed to a decrease in shrinkage and relative density. The highest thermal conductivity was measured at 539.7 W/ m·K for a Cu-Gr volume ratio of 5:5. The thermal conductivity of the directionally controlled Gr was measured to be about 20-30 W/m·K higher than the uncontrolled sample. Furthermore, the TDP (Thermal distortion parameter), for which a lower value indicates better thermal stability, was systematically investigated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. 10.1016/j.applthermaleng.2003.12.02910.1016/j.applthermaleng.2003.12.029 ↗
2. 10.1002/er.607810.1002/er.6078 ↗
3. Pietraico · 2009 · 1911
4. 10.1063/1.474830710.1063/1.4748307 ↗
5. 10.1007/s10854-013-1138-x10.1007/s10854-013-1138-x ↗
6. 10.1016/j.microrel.2017.10.00710.1016/j.microrel.2017.10.007 ↗
7. 10.1016/j.compositesa.2019.10547410.1016/j.compositesa.2019.105474 ↗
8. Dewidar · 2010 · 25
9. 10.1016/j.progpolymsci.2010.11.00310.1016/j.progpolymsci.2010.11.003 ↗
10. 10.3390/met1011150610.3390/met10111506 ↗
11. 10.1016/j.ceramint.2016.10.06710.1016/j.ceramint.2016.10.067 ↗
12. Klein · 2011 · 29
13. 10.1016/s1003-6326(15)63715-310.1016/s1003-6326(15)63715-3 ↗
14. Lee · 2017 · 783
15. 10.1007/s10853-006-6555-210.1007/s10853-006-6555-2 ↗
16. 10.2320/matertrans.42.184610.2320/matertrans.42.1846 ↗
17. Ohjiand · 1994 · 1685
18. 10.3365/kjmm.2022.60.1.5310.3365/kjmm.2022.60.1.53 ↗
19. 10.4150/kpmi.2016.23.3.19510.4150/kpmi.2016.23.3.195 ↗
20. 10.1016/j.triboint.2021.10709410.1016/j.triboint.2021.107094 ↗
21. Eriksson · 2010
22. 10.1016/j.calphad.2013.12.00210.1016/j.calphad.2013.12.002 ↗
23. 10.1016/j.compositesb.2019.10773510.1016/j.compositesb.2019.107735 ↗
24. Kumar · 2018 · 196
25. 10.1016/s0008-6223(97)00189-910.1016/s0008-6223(97)00189-9 ↗
26. 10.1016/j.carbon.2019.04.05510.1016/j.carbon.2019.04.055 ↗
27. 10.1016/j.jallcom.2018.11.13110.1016/j.jallcom.2018.11.131 ↗
28. Zareiand · 2021 · 108273
29. 10.1007/bf0271714110.1007/bf02717141 ↗