journal article·2016-08-05Open access

Effect of Sawing Velocity Variation on Chipping Damage of Semiconductor Wafers with Different Thicknesses

Seong-Min Lee

Abstract

This work details how the sawing velocity influences the chipping damage of semiconductor wafers with different thicknesses during wafer separation. The experimental result shows that at a sawing velocity higher than 60000 rpm, in thinner wafers the magnitude of chipping damage more strongly depends on the revolving velocity of the saw blade. It is also shown that the aspect ratio of the sawing-induced groove formed in a wafer is a key factor in determining the dependence of the chipping damage magnitude on wafer thickness. That is, at a sawing velocity higher than 60000 rpm, the saw blade thickness should be thin enough to allow the sawing-induced scribe (in the shape of a trench) in the wafer to have an aspect ratio larger than 2. Consequently, in order to prevent degradation in device reliability due to the mechanical dicing of a semiconductor wafer thinner than 3T (approximately 45 um), the sawing velocity or saw blade thickness should be reduced.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.