journal article·2019-07-05Open access

Properties of Perovskite Solar Cells with GO Addition on TiO2 Layer

Hyeryeong Lee, Kwangbae Kim, Ohsung Song

Abstract

The photovoltaic properties of perovskite solar cells (PSCs) were investigated by adding graphene oxide (GO) to the electron transport layer of TiO 2 . The PSCs were fabricated with a glass/FTO/BL-TiO 2 /meso-TiO 2 + GO/perovskite/HTL/Au electrode structure by adding various contents of GO (0.0, 0.3, 0.5 and 0.7 wt%) to the TiO 2 layer. To analyze the photovoltaic characteristics and transmittance of the TiO 2 layer of the PSCs according to the GO content, solar simulator and ultraviolet-visible-near-infrared spectroscopy were used, respectively. Atomic force microscopy and field emission scanning electron microscope were used to analyze the microstructures of both the TiO 2 layer and the perovskite layer. The results of the photovoltaic characteristics indicated that energy conversion efficiency (ECE) was gradually increased to 12.70%, 13.13%, 14.19%, and 12.63% for 0.0, 0.3, 0.5, and 0.7 wt% GO contents, respectively. The highest ECE was observed at a GO content of 0.5 wt%, and a decrease in the ECE was confirmed at higher levels. The increase in ECE was confirmed by measuring short circuit current density (J sc ) and shunt resistance which increased with the GO addition. However, when an excessive amount of GO content was added, a decrease in the ECE was observed, due to the decrease in J sc by the reduction in transmittance. In particular, an increase in the perovskite crystal size caused an increase in the ECE, due to the increased rms of TiO 2 at 0.5 wt% GO. With the 0.7 wt% GO TiO 2 layer, the perovskite grain size was decreased by the reduction in rms, and this resulted in a decrease in J sc and ECE. These results suggest that we might improve the efficiency of perovskite solar cells by adding the proper amount of GO to the TiO 2 layer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. 10.1038/nphoton.2014.13410.1038/nphoton.2014.134 ↗
2. 10.1016/j.jpowsour.2019.01.04110.1016/j.jpowsour.2019.01.041 ↗
3. 10.1039/C6NR02276F10.1039/C6NR02276F ↗
4. 10.1039/C6TA00679E10.1039/C6TA00679E ↗
5. Jalebi · 2017 · e55307
6. 10.1039/C5TA06041A10.1039/C5TA06041A ↗
7. 10.3389/fchem.2019.0005010.3389/fchem.2019.00050 ↗
8. 10.1002/adfm.20160091010.1002/adfm.201600910 ↗
9. Bati
10. 10.1021/acsami.5b0617110.1021/acsami.5b06171 ↗
11. Kim · 2018 · 321
12. Bowden · 2019
13. 10.1021/acsomega.7b0194410.1021/acsomega.7b01944 ↗
14. 10.1016/j.jallcom.2019.01.37210.1016/j.jallcom.2019.01.372 ↗
15. 10.1016/j.electacta.2017.12.10810.1016/j.electacta.2017.12.108 ↗
16. 10.1039/C8RA03175D10.1039/C8RA03175D ↗
17. Morlta · 2010 · 041213
18. 10.1016/j.solmat.2017.04.03810.1016/j.solmat.2017.04.038 ↗
19. 10.1038/srep4614110.1038/srep46141 ↗