Improving the Corrosion Resistance of AISI 316L Steel for Semiconductor Piping by Controlled Delta-Ferrite Content
Source abstract
Abstract
This study evaluated changes in delta-ferrite content depending on the preheating of AISI 316L stainless steel. We also determined the reasons for the variation in delta-ferrite content, which affects corrosion resistance. Changes in delta-ferrite content after preheating was confirmed using a Feritscope, and the microstructure was analyzed using optical microscopy (OM). We found that the delta-ferrite microstructure size decreased when preheating time was increased at 1295 oC, and that the delta-ferrite content could be controlled through preheating. Potentiodynamic polarization test were carried out in NaCl (0.5 M) + H2SO4 (0.5 M) solution, and it was found that higher delta-ferrite content resulted in less corrosion potential and passive potential. To determine the cause, an analysis was conducted using energy-dispersive spectroscopy (EDS), which confirmed that higher delta-ferrite content led to weaker corrosion resistance, due to Cr degradation at the delta-ferrite and austenite boundaries. The degradation of Cr on the boundaries between austenite and delta-ferrite can be explained by the difference in the diffusion coefficient of Cr in the ferrite and austenite. A scanning electron microscopy (SEM) analysis of material used for actual semiconductor piping confirmed that corrosion begins at the delta-ferrite and austenite boundaries. These results confirm the need to control delta-ferrite content in AISI 316L stainless steel used for semiconductor piping.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. 10.1016/j.jallcom.2017.10.15410.1016/j.jallcom.2017.10.154 ↗
2. 10.1007/s12613-018-1610-y10.1007/s12613-018-1610-y ↗
3. 10.1361/10599490177034482710.1361/105994901770344827 ↗
4. Wang · 2010 · 13
5. Kožuh · 2013 · 53
6. 10.1016/j.msea.2010.01.08510.1016/j.msea.2010.01.085 ↗
7. 10.1007/s11661-015-3242-410.1007/s11661-015-3242-4 ↗
8. Kim · 1996 · 18
9. Kim · 2018 · 183
10. 10.1149/2.0561714jes10.1149/2.0561714jes ↗
11. 10.1007/BF0079822910.1007/BF00798229 ↗
12. 10.1016/S0022-3115(98)00200-110.1016/S0022-3115(98)00200-1 ↗
13. 10.4028/www.scientific.net/SSP.124-126.153310.4028/www.scientific.net/SSP.124-126.1533 ↗
14. Padilha · 2013 · 733
15. 10.1007/s10853-008-3200-210.1007/s10853-008-3200-2 ↗
16. 10.1016/S0924-0136(03)00785-410.1016/S0924-0136(03)00785-4 ↗
17. 10.1016/j.msea.2017.10.00210.1016/j.msea.2017.10.002 ↗
18. 10.1177/030932471349608610.1177/0309324713496086 ↗
19. 10.3365/KJMM.2019.57.6.34310.3365/KJMM.2019.57.6.343 ↗
20. 10.1016/j.jmrt.2018.12.00810.1016/j.jmrt.2018.12.008 ↗
21. 10.1016/j.corsci.2006.01.00310.1016/j.corsci.2006.01.003 ↗
22. 10.1080/23311916.2016.115054610.1080/23311916.2016.1150546 ↗
23. 10.1007/s11665-019-3862-810.1007/s11665-019-3862-8 ↗
24. 10.3365/KJMM.2019.57.2.10810.3365/KJMM.2019.57.2.108 ↗