High Thermal Conductivity of Silicon Nitride Ceramics: A Review
Source abstract
Abstract
Silicon-nitride ceramic substrates exhibit high thermal conductivity, high electrical insulation, high mechanical strength, low expansion. The Cu-clad ceramic substrate is the key material for the encapsulation of insulated gate bipolar transistor modules. In this review, we divide the research of high thermal conductivity silicon nitride ceramics into four stages: 1) exploration of thermal conductivity with different sintering additives; 2) using the anisotropy of silicon nitride grains to improve the thermal conductivity, through the addition of silicon nitride grain seeds combined with tape casting technology, sintered to obtain a thermal conductivity of 155W/(m·K) silicon nitride, and with the development of the strong magnetic field alignment technology in the later stage, the thermal conductivity can be increased to 176W/(m·K); 3) using sintered of reaction-bonded silicon nitride technology to improve thermal conductivity, thermal conductivity can be increased to about 180W/(m·K); 4) the application of high thermal conductivity silicon nitride ceramic substrate. Finally, future preparation methods and applications of high thermal conductivity silicon nitride ceramics are envisioned.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal properties of materials · Advanced ceramic materials synthesis · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of High Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences, China
University of Chinese Academy of Sciences, China
Engineering & Technology Center for Aerospace Materials, Wuzhen Laboratory, China
Funding
National Natural Science Foundation of China · Shanghai Sailing Program · State Key Laboratory of High Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences, China
References (100+)
Show source-provided references
1. Abe O., Sintering of silicon nitride with alkaline-earth nitrides, Ceramics International, 16 (1990) 53–60. https://doi.org/10.1016/0272-8842(90)90063-L10.1016/0272-8842(90)90063-L ↗
2. Akimune Y., Munakata F., Matsuo K., Hirosaki N., Okamoto Y., Misono K., Raman spectroscopic analysis of structural defects in hot isostatically pressed silicon nitride, Journal of the Ceramic Society of Japan, 107 (1999) 339–342. https://doi.org/10.2109/JCERSJ.107.33910.2109/jcersj.107.339 ↗
3. Becher P.F., Painter G.S., Shibata N., Waters S.B., Lin H.-T., Effects of rare-earth (RE) intergranular adsorption on the phase transformation, microstructure evolution, and mechanical properties in silicon nitride with RE2O3 + MgO additives: RE = La, Gd, and Lu, Journal of the American Ceramic Society, 91 (2008) 2328–2336. https://doi.org/10.1111/j.1551-2916.2008.02448.x10.1111/j.1551-2916.2008.02448.x ↗
4. Becher P.F., Sun E.Y., Plucknett K.P., Alexander K.B., Kang E.-S., Hirao K., Brito M.E., Microstructural design of silicon nitride with improved fracture toughness: I, effects of grain shape and size, Journal of the American Ceramic Society, 81 (1998) 2821–2830. https://doi.org/10.1111/j.1151-2916.1998.tb02702.x10.1111/j.1151-2916.1998.tb02702.x ↗
5. Chang F.-W., Liou T.-H., Tsai F.-M., The nitridation kinetics of silicon powder compacts, Thermochimica Acta, 354 (2000) 71–80. https://doi.org/10.1016/s0040-6031(00)00432-910.1016/S0040-6031(00)00432-9 ↗
6. Chen H., Wang W., Yu X., Zuo K.-h., Xia Y., Yin J., Liang H., Yao D., Zeng Y.-P., The effect of annealing temperature on flexural strength, dielectric loss and thermal conductivity of Si3N4 ceramics, Journal of Alloys and Compounds, 813 (2020) 152203. https://doi.org/10.1016/j.jallcom.2019.15220310.1016/j.jallcom.2019.152203 ↗
7. Duan Y., Liu N., Zhang J., Zhang H., Li X., Cost effective preparation of Si3N4 ceramics with improved thermal conductivity and mechanical properties, Journal of the European Ceramic Society, 40 (2020) 298–304. https://doi.org/10.1016/j.jeurceramsoc.2019.10.00310.1016/j.jeurceramsoc.2019.10.003 ↗
8. Duan Y., Zhang J., Li X., Bai H., Sajgalik P., Jiang D., High thermal conductivity silicon nitride ceramics prepared by pressureless sintering with ternary sintering additives, International Journal of Applied Ceramic Technology, 16 (2019) 1399–1406. https://doi.org/10.1111/ijac.1322010.1111/ijac.13220 ↗
9. Duan Y., Zhang J., Li X., Huang M., Shi Y., Xie J., Jiang D., Rare earth oxides on properties of pressureless sintered Si3N4 ceramics, Journal of Inorganic Materials, 32 (2017) 1275–1279. https://doi.org/10.15541/jim2017005610.15541/jim20170056 ↗
10. Duan Y., Zhang J., Li X., Shi Y., Xie J., Jiang D., Low temperature pressureless sintering of silicon nitride ceramics for circuit substrates in powder electronic devices, Ceramics International, 44 (2018) 4375–4380. https://doi.org/10.1016/j.ceramint.2017.12.03310.1016/j.ceramint.2017.12.033 ↗
11. Duan Y., Zhang J., Zhou B., Li X., Wang Q., Liu N., Li Z., Wang L., Fabrication of high performance silicon nitride ceramics with TiO2 additive by annealing process, Ceramics International, 49 (2023) 9035–9041. https://doi.org/10.1016/j.ceramint.2022.11.05910.1016/j.ceramint.2022.11.059 ↗
12. Feng T., Ruan X., Prediction of spectral phonon mean free path and thermal conductivity with applications to thermoelectrics and thermal management: A review, Journal of Nanomaterials, 2014 (2014) 206370. https://doi.org/10.1155/2014/20637010.1155/2014/206370 ↗
13. Fu S., Yang Z., Li H., Wang L., Li Y., Li J., Effects of Gd2O3 and MgSiN2 sintering additives on the thermal conductivity and mechanical properties of Si3N4 ceramics, International Journal of Applied Ceramic Technology, 20 (2022) 1855–1864. https://doi.org/10.1111/ijac.1427910.1111/ijac.14279 ↗
14. Golla B.R., Ko J.W., Kim J.-M., Kim H.-D., Effect of particle size and oxygen content of Si on processing, microstructure and thermal conductivity of sintered reaction bonded Si3N4, Journal of Alloys and Compounds, 595 (2014) 60–66. https://doi.org/10.1016/j.jallcom.2014.01.13110.1016/j.jallcom.2014.01.131 ↗
15. Guo W.-M., Wu L.-X., Ma T., You Y., Lin H.-T., Rapid fabrication of Si3N4 ceramics by reaction-bonding and pressureless sintering, Journal of the European Ceramic Society, 36 (2016) 3919–3924. https://doi.org/10.1016/j.jeurceramsoc.2016.06.00710.1016/j.jeurceramsoc.2016.06.007 ↗
16. Gutiérrez C.A., Moreno R., Tape casting of non-aqueous silicon nitride slips, Journal of the European Ceramic Society, 20 (2000) 1527–1537. https://doi.org/10.1016/S0955-2219(99)00216-210.1016/S0955-2219(99)00216-2 ↗
17. Haggerty J., Lightfoot A., Opportunities for enhancing the thermal conductivities of SiC and Si3N4 ceramics through improved processing, Ceramic Engineering & Science Proceedings, (1995) 475–487. https://doi.org/10.1002/9780470314715.ch5210.1002/9780470314715.ch52 ↗
18. Haggerty J.S., Lightfoot A., Ritter J.E., Gennari P.A., Nair S.V., Oxidation and fracture strength of high-purity reaction-bonded silicon nitride, Journal of the American Ceramic Society, 72 (1989) 1675–1679. https://doi.org/10.1111/j.1151-2916.1989.tb06302.x10.1111/j.1151-2916.1989.tb06302.x ↗
19. Hayashi H., Hirao K., Kitayama M., Yamauchi Y., Kanzaki S., Effect of oxygen content on thermal conductivity of sintered silicon nitride, Journal of the Ceramic Society of Japan, 109 (2001a) 1046–1050. https://doi.org/10.2109/jcersj.109.1276_104610.2109/jcersj.109.1276_1046 ↗
20. Hayashi H., Hirao K., Toriyama M., Kanzaki S., Itatani K., MgSiN2 addition as a means of increasing the thermal conductivity of β-silicon nitride, Journal of the American Ceramic Society, 84 (2001b) 3060–3062. https://doi.org/10.1111/j.1151-2916.2001.tb01141.x10.1111/j.1151-2916.2001.tb01141.x ↗
21. Hirao K., Watari K., Brito M.E., Toriyama M., Kanzaki S., High thermal conductivity in silicon nitride with anisotropic microstructure, Journal of the American Ceramic Society, 79 (1996) 2485–2488. https://doi.org/10.1111/j.1151-2916.1996.tb09002.x10.1111/j.1151-2916.1996.tb09002.x ↗
22. Hirao K., Watari K., Hayashi H., Kitayama M., High thermal conductivity silicon nitride ceramic, MRS Bulletin - Materials Research Society, 26 (2001) 451–457. https://doi.org/10.1557/mrs2001.11510.1557/mrs2001.115 ↗
23. Hirao K., Zhou Y., Miyazaki H., Hyuga H., Improvement in thermal conductivity of silicon nitride ceramics via microstructural control and their application to heat dissipation substrates, Journal of the Japan Society of Powder and Powder Metallurgy, 64 (2017) 439–444. https://doi.org/10.2497/jjspm.64.43910.2497/jjspm.64.439 ↗
24. Hirosaki N., Ogata S., Kocer C., Kitagawa H., Nakamura Y., Molecular dynamics calculation of the ideal thermal conductivity of single-crystal α- and β-Si3N4, Physical Review B, 65 (2002) 134110. https://doi.org/10.1103/PhysRevB.65.13411010.1103/PhysRevB.65.134110 ↗
25. Hirosaki N., Okamoto Y., Ando M., Munakata F., Akimune Y., Thermal conductivity of gas-pressure-sintered silicon nitride, Journal of the American Ceramic Society, 79 (1996) 2878–2882. https://doi.org/10.1111/j.1151-2916.1996.tb08721.x10.1111/j.1151-2916.1996.tb08721.x ↗
26. Hu F., Zhao L., Xie Z.P., Silicon nitride ceramics with high thermal conductivity and excellent mechanical properties fabricated with MgF2 sintering aid and post-sintering heat treatment, Journal of Ceramic Science and Technology, 07 (2016) 423–428. https://doi.org/10.4416/JCST2016-00065
27. Hu F., Zhu T., Xie Z., Liu J., Effect of composite sintering additives containing non-oxide on mechanical, thermal and dielectric properties of silicon nitride ceramics substrate, Ceramics International, 47 (2021) 13635–13643. https://doi.org/10.1016/j.ceramint.2021.01.22410.1016/j.ceramint.2021.01.224 ↗
28. Huang M., Huang Y., Ou J., Wu Y., Wang J., Wu S., Effect of a new nonoxide additive, Y3Si2C2, on the thermal conductivity and mechanical properties of Si3N4 ceramics, International Journal of Applied Ceramic Technology, 19 (2022) 3403–3409. https://doi.org/10.1111/ijac.1413210.1111/ijac.14132 ↗
29. Imamura H., Hirao K., Brito M.E., Toriyama M., Kanzaki S., Further improvement in mechanical properties of highly anisotropic silicon nitride ceramics, Journal of the American Ceramic Society, 83 (2000) 495–500. https://doi.org/10.1111/j.1151-2916.2000.tb01223.x10.1111/j.1151-2916.2000.tb01223.x ↗
30. Jennings H.M., Review on reactions between silicon and nitrogen: part 1 mechanisms, Journal of Materials Science, 18 (1983) 951–967. https://doi.org/10.1007/bf0055196110.1007/BF00551961 ↗
31. Jiang G.J., Xu J.Y., Peng G.H., Zhuang H.R., Li W.L., Xu S.Y., Mao Y.J., Sintering of silicon nitride ceramics with magnesium silicon nitride and yttrium oxide as sintering aids, Materials Science and Engineering, 18 (2011) 202017. https://doi.org/10.1088/1757-899X/18/20/20201710.1088/1757-899X/18/20/202017 ↗
32. Kaidash O.N., Fesenko I.P., Kryl Y.A., Heat Conductivity, Physicomechanical properties and interrelations of them and structures of pressureless sintered composites produced of Si3N4–Al2O3–Y2O3(–ZrO2) nanodispersed system, Journal of Superhard Materials, 36 (2014) 96–104. https://doi.org/10.3103/S106345761402004X10.3103/S106345761402004X ↗
33. Kim J.-M., Ko S.-I., Kim H.-N., Ko J.-W., Lee J.-W., Kim H.-D., Park Y.-J., Effects of microstructure and intergranular glassy phases on thermal conductivity of silicon nitride, Ceramics International, 43 (2017) 5441–5449. https://doi.org/10.1016/j.ceramint.2017.01.03710.1016/j.ceramint.2017.01.037 ↗
34. Kingery W.D., Densification during sintering in the presence of a liquid phase: I. theory, Journal of Applied Physics, 30 (1959) 301–306. https://doi.org/10.1063/1.173515510.1063/1.1735155 ↗
35. Kingery W.D., Narasimhan M.D., Densification during sintering in the presence of a liquid phase: II. experimental, Journal of Applied Physics, 30 (1959) 307–310. https://doi.org/10.1063/1.173515610.1063/1.1735156 ↗
36. Kitayama M., Hirao K., Kanzaki S., Effect of rare earth oxide additives on the phase transformation rates of Si3N4, Journal of the American Ceramic Society, 89 (2006) 2612–2618. https://doi.org/10.1111/j.1551-2916.2006.01106.x10.1111/j.1551-2916.2006.01106.x ↗
37. Kitayama M., Hirao K., Toriyama M., Kanzaki S., Modeling and simulation of grain growth in Si3N4: I. anisotropic Ostwald ripening, Acta Materialia, 46 (1998a) 6541–6550. https://doi.org/10.1016/S1359-6454(98)00290-010.1016/S1359-6454(98)00290-0 ↗
38. Kitayama M., Hirao K., Toriyama M., Kanzaki S., Modeling and simulation of grain growth in Si3N4: II. the α–β transformation, Acta Materialia, 46 (1998b) 6551–6557. https://doi.org/10.1016/S1359-6454(98)00291-210.1016/S1359-6454(98)00291-2 ↗
39. Kitayama M., Hirao K., Toriyama M., Kanzaki S., Control of β-Si3N4 crystal morphology and its mechanism (part 1), Journal of the Ceramic Society of Japan, 107 (1999a) 930–934. https://doi.org/10.2109/JCERSJ.107.93010.2109/jcersj.107.930 ↗
40. Kitayama M., Hirao K., Toriyama M., Kanzaki S., Thermal conductivity of β-Si3N4: I, effects of various microstructural factors, Journal of the American Ceramic Society, 82 (1999b) 3105–3112. https://doi.org/10.1111/j.1151-2916.1999.tb02209.x10.1111/j.1151-2916.1999.tb02209.x ↗
41. Kitayama M., Hirao K., Tsuge A., Watari K., Toriyama M., Kanzaki S., Thermal conductivity of β-Si3N4: II, effect of lattice oxygen, Journal of the American Ceramic Society, 83 (2000) 1985–1992. https://doi.org/10.1111/j.1151-2916.2000.tb01501.x10.1111/j.1151-2916.2000.tb01501.x ↗
42. Kitayama M., Hirao K., Watari K., Toriyama M., Kanzaki S., Thermal conductivity of β-Si3N4: III, effect of rare-earth (RE = La, Nd, Gd, Y, Yb, and Sc) oxide additives, Journal of the American Ceramic Society, 84 (2001) 353–358 https://doi.org/10.1111/j.1151-2916.2001.tb00662.x10.1111/j.1151-2916.2001.tb00662.x ↗
43. Kong J.H., Ma H.J., Jung W.K., Hong J., Jun K., Kim D.K., Self-reinforced and high-thermal conductivity silicon nitride by tailoring α-β phase ratio with pressureless multi-step sintering, Ceramics International, 47 (2021) 13057–13064. https://doi.org/10.1016/j.ceramint.2021.01.16910.1016/j.ceramint.2021.01.169 ↗
44. Krause Jr R.F., Wiederhorn S.M., Li C.-W., Tensile creep behavior of a gas-pressure-sintered silicon nitride containing silicon carbide, Journal of the American Ceramic Society, 84 (2001) 2394–2400. https://doi.org/10.1111/j.1151-2916.2001.tb01020.x10.1111/j.1151-2916.2001.tb01020.x ↗
45. Kumar K., Park Y.-J., Kim M.-J., Kim H.-N., Jin Ma H., Lee J.-W., Ko J.-W., Influence of ternary oxide additives on thermal conductivity of pressureless sintered Si3N4, Materials Letters, 328 (2022) 133189. https://doi.org/10.1016/j.matlet.2022.13318910.1016/j.matlet.2022.133189 ↗
46. Kusano D., Hyuga H., Zhou Y., Hirao K., Effect of aluminum content on mechanical properties and thermal conductivities of sintered reaction-bonded silicon nitride, International Journal of Applied Ceramic Technology, 11 (2014) 534–542. https://doi.org/10.1111/ijac.1203510.1111/ijac.12035 ↗
47. Kusano D., Noda Y., Shibasaki H., Hyuga H., Zhou Y., Hirao K., Effects of impurity iron content on characteristics of sintered reaction-bonded silicon nitride, International Journal of Applied Ceramic Technology, 10 (2013) 690–700. https://doi.org/10.1111/j.1744-7402.2012.02767.x10.1111/j.1744-7402.2012.02767.x ↗
48. Lee H.M., Lee E.B., Kim D.L., Kim D.K., Comparative study of oxide and non-oxide additives in high thermal conductive and high strength Si3N4 ceramics, Ceramics International, 42 (2016) 17466–17471. https://doi.org/10.1016/j.ceramint.2016.08.05110.1016/j.ceramint.2016.08.051 ↗
49. Lee S.-H., Densification, mass loss, and mechanical properties of low-temperature pressureless-sintered Si3N4 with LiYO2 additive: the effects of additive content and annealing, International Journal of Applied Ceramic Technology, 7 (2010) 881–888. https://doi.org/10.1111/j.1744-7402.2009.02402.x10.1111/j.1744-7402.2009.02402.x ↗
50. Lee S.-K., Yamada I., Kume S., Nakano H., Hatori K., Matsui G., Watari K., Thermal conductivity measurement at the micrometer scale of ceramics using thermoreflectance technique—High-thermal-conductivity AlN with reduced amount of grain boundary phase, Journal of the Ceramic Society of Japan, 116 (2008) 1260–1264. https://doi.org/10.2109/jcersj2.116.126010.2109/jcersj2.116.1260 ↗
51. Legut D., Wdowik U.D., Kurtyka P., Vibrational and dielectric properties of α-Si3N4 from density functional theory, Materials Chemistry and Physics, 147 (2014) 42–49. https://doi.org/10.1016/j.matchemphys.2014.03.05810.1016/j.matchemphys.2014.03.058 ↗
52. Li B., Pottier L., Roger J.P., Fournier D., Watari K., Hirao K., Measuring the anisotropic thermal diffusivity of silicon nitride grains by thermoreflectance microscopy, Journal of the European Ceramic Society, 19 (1999) 1631–1639. https://doi.org/10.1016/S0955-2219(98)00258-110.1016/S0955-2219(98)00258-1 ↗
53. Li J., Jiang Q., Pan Z., Lv D., Wu S., Fabrication of silicon nitride with high thermal conductivity and flexural strength by hot-pressing flowing sintering, International Journal of Applied Ceramic Technology, 21 (2024) 2841–2849. https://doi.org/10.1111/ijac.1474110.1111/ijac.14741 ↗
54. Li Y., Kim H.-N., Wu H., Kim M.-J., Ko J.-W., Kim J.-M., Park Y.-J., Huang Z., Kim H.-D., Improved thermal conductivity of sintered reaction-bonded silicon nitride using a BN/graphite powder bed, Journal of the European Ceramic Society, 37 (2017) 4483–4490. https://doi.org/10.1016/j.jeurceramsoc.2017.05.04510.1016/j.jeurceramsoc.2017.05.045 ↗
55. Li Y., Kim H.-N., Wu H., Kim M.-J., Ko J.-W., Park Y.-J., Huang Z., Kim H.-D., Enhanced thermal conductivity in Si3N4 ceramic with the addition of Y2Si4N6C, Journal of the American Ceramic Society, 101 (2018) 4128–4136. https://doi.org/10.1111/jace.1554410.1111/jace.15544 ↗
56. Li Y., Kim H.-N., Wu H., Kim M.-J., Ko J.-W., Park Y.-J., Huang Z., Kim H.-D., Enhanced thermal conductivity in Si3N4 ceramic by addition of a small amount of carbon, Journal of the European Ceramic Society, 39 (2019) 157–164. https://doi.org/10.1016/j.jeurceramsoc.2018.10.00610.1016/j.jeurceramsoc.2018.10.006 ↗
57. Li Y., Kim H.-N., Wu H., Kim M.-J., Ko J.-W., Park Y.-J., Huang Z., Kim H.-D., Microstructure and thermal conductivity of gas-pressure-sintered Si3N4 ceramic: the effects of Y2O3 additive content, Journal of the European Ceramic Society, 41 (2021) 274–283. https://doi.org/10.1016/j.jeurceramsoc.2020.08.03510.1016/j.jeurceramsoc.2020.08.035 ↗
58. Liang H., Zeng Y., Zuo K., Xia Y., Yao D., Yin J., Mechanical properties and thermal conductivity of Si3N4 ceramics with YF3 and MgO as sintering additives, Ceramics International, 42 (2016) 15679–15686. https://doi.org/10.1016/j.ceramint.2016.07.02410.1016/j.ceramint.2016.07.024 ↗
59. Liao S., Zhou L., Jiang C., Wang J., Zhuang Y., Li S., Thermal conductivity and mechanical properties of Si3N4 ceramics with binary fluoride sintering additives, Journal of the European Ceramic Society, 41 (2021) 6971–6982. https://doi.org/10.1016/j.jeurceramsoc.2021.07.03510.1016/j.jeurceramsoc.2021.07.035 ↗
60. Liu Y., Liu R., Zheng Y., Zhao J., Sui T., Li X., Lin B., Effect of the ratio of Y2O3 and MgSiN2 sintering additives on the microstructure, thermal and mechanical properties of Si3N4 ceramics, Ceramics International, 49 (2023) 36490–36496. https://doi.org/10.1016/j.ceramint.2023.08.33210.1016/j.ceramint.2023.08.332 ↗
61. Lu T., Wang T., Jia Y., Ding M., Shi Y., Xie J., Lei F., Zhang L., Fan L., Fabrication of high thermal conductivity silicon nitride ceramics by pressureless sintering with MgO and Y2O3 as sintering additives, Ceramics International, 46 (2020) 27175–27183. https://doi.org/10.1016/j.ceramint.2020.07.19810.1016/j.ceramint.2020.07.198 ↗
62. Luo C., Zhang Y., Deng T., Pressureless sintering of high performance silicon nitride ceramics at 1620 °C, Ceramics International, 47 (2021) 29371–29378. https://doi.org/10.1016/j.ceramint.2021.07.10410.1016/j.ceramint.2021.07.104 ↗
63. Matovic B., Boskovic S., Thermal conductivity of pressureless sintered Si3N4 ceramics with Li-exchanged zeolite, Journal of the Serbian Chemical Society, 69 (2004) 705–710. https://doi.org/10.2298/JSC0409705M10.2298/JSC0409705M ↗
64. Matovic B., Rixecker G., Golczewski J., Aldinger F., Thermal conductivity of pressureless sintered silicon nitride materials with LiYO2 additive, Science of Sintering, 36 (2004) 3–9. https://doi.org/10.2298/SOS0401003M10.2298/SOS0401003M ↗
65. Moulson A.J., Review, reaction-bonded silicon nitride its formation and properties, Journal of Materials Science, 14 (1979) 1017–1051. https://doi.org/10.1007/bf0056128710.1007/BF00561287 ↗
66. Niihara K., Hirai T., Chemical vapour-deposited silicon nitride, Journal of Materials Science, 12 (1977) 1243–1252. https://doi.org/10.1007/BF0120944310.1007/BF02426863 ↗
67. Ogata S., Hirosaki N., Kocer C., Shibutani Y., A comparative ab initio study of the ‘ideal’ strength of single crystal α- and β-Si3N4, Acta Materialia, 52 (2004) 233–238. https://doi.org/10.1016/j.actamat.2003.09.00810.1016/j.actamat.2003.09.008 ↗
68. Ohashi M., Nakamura K., Hirao K., Kanzaki S., Hampshire S., Formation and properties of Ln-Si-O-N glasses (Ln = Lanthanides or Y), Journal of the American Ceramic Society, 78 (1995) 71–76. https://doi.org/10.1111/j.1151-2916.1995.tb08362.x10.1111/j.1151-2916.1995.tb08362.x ↗
69. Okumura H., Present status and future prospect of widegap semiconductor high-power devices, Japanese Journal of Applied Physics, 45 (2006) 7565. https://doi.org/10.1143/jjap.45.756510.1143/JJAP.45.7565 ↗
70. Park C., Bang K.-S., Park D.-S., Kim H.-D., Danyluk S., Pressureless-sintering of reaction bonded silicon nitride containing cordierite, Journal of Ceramic Processing Research, 13 (2012) 226–230.
71. Riley F.L., Silicon nitride and related materials, Journal of the American Ceramic Society, 83 (2000) 245–265. https://doi.org/10.1111/j.1151-2916.2000.tb01182.x10.1111/j.1151-2916.2000.tb01182.x ↗
72. Sakka Y., Fabrication of ceramics with highly controlled microstructures by advanced fine powder processing, KONA Powder and Particle Journal, 36 (2019) 114–128. https://doi.org/10.14356/kona.201900710.14356/kona.2019007 ↗
73. Shibata N., Pennycook S.J., Gosnell T.R., Painter G.S., Shelton W.A., Becher P.F., Observation of rare-earth segregation in silicon nitride ceramics at subnanometre dimensions, Nature, 428 (2004) 726–730. https://doi.org/10.1038/nature0244510.1038/nature02445 ↗
74. Suematsu H., Mitomo M., Mitchell T.E., Petrovic J.J., Fukunaga O., Ohashi N., The α–β Transformation in Silicon Nitride Single Crystals, Journal of the American Ceramic Society, 80 (2005) 615–620. https://doi.org/10.1111/j.1151-2916.1997.tb02876.x10.1111/j.1151-2916.1997.tb02876.x ↗
75. Sun E.Y., Becher P.F., Plucknett K.P., Hsueh C.-H., Alexander K.B., Waters S.B., Hirao K., Brito M.E., Microstructural design of silicon nitride with improved fracture toughness: II, Effects of yttria and alumina additives, Journal of the American Ceramic Society, 81 (1998) 2831–2840. https://doi.org/10.1111/j.1151-2916.1998.tb02703.x10.1111/j.1151-2916.1998.tb02703.x ↗
76. Tanaka K., Zaki K., Martin C., Sintering of Si3N4-HIP map for liquid phase sintering, Proceedings of the International Conference on Hot Isostatic Pressing, Sweden, Centiek, (1987).
77. Tiwari J., Feng T., Accurate prediction of thermal conductivity of Al2O3 at ultrahigh temperatures, Physical Review B, 109 (2024) 075201. https://doi.org/10.1103/PhysRevB.109.07520110.1103/PhysRevB.109.075201 ↗
78. Tsukuma K., Shimada M., Koizumi M., Thermal conductivity and microhardness of Si3N4 with and without additives, American Ceramic Society Bulletin, 60 (1981) 910–912.
79. Wang C.-M., Pan X., Rühle M., Riley F.L., Mitomo M., Silicon nitride crystal structure and observations of lattice defects, Journal of Materials Science, 31 (1996) 5281–5298. https://doi.org/10.1007/BF0115929410.1007/BF01159294 ↗
80. Wang L., Qi Q., Cai P., Zhang H., Yang X., Liu X., Jiao Z., Huang Z., New route to improve the fracture toughness and flexural strength of Si3N4 ceramics by adding FeSi2, Scripta Materialia, 126 (2017) 11–14. https://doi.org/10.1016/j.scriptamat.2016.08.01210.1016/j.scriptamat.2016.08.012 ↗
81. Wang W., Yao D., Chen H., Xia Y., Zuo K., Yin J., Liang H., Zeng Y.P., ZrSi2–MgO as novel additives for high thermal conductivity of β-Si3N4 ceramics, Journal of the American Ceramic Society, 103 (2019) 2090–2100. https://doi.org/10.1111/jace.1690210.1111/jace.16902 ↗
82. Wang W., Yao D., Liang H., Xia Y., Zuo K., Yin J., Zeng Y.-P., Effect of in-situ formed Y2O3 by metal hydride reduction reaction on thermal conductivity of β-Si3N4 ceramics, Journal of the European Ceramic Society, 40 (2020a) 5316–5323. https://doi.org/10.1016/j.jeurceramsoc.2020.06.00510.1016/j.jeurceramsoc.2020.06.005 ↗
83. Wang W., Yao D., Liang H., Xia Y., Zuo K., Yin J., Zeng Y.P., Effect of the binary nonoxide additives on the densification behavior and thermal conductivity of Si3N4 ceramics, Journal of the American Ceramic Society, 103 (2020b) 5891–5899. https://doi.org/10.1111/jace.1728210.1111/jace.17282 ↗
84. Wang W., Yao D., Liang H., Xia Y., Zuo K., Yin J., Zeng Y.-P., Enhanced thermal conductivity in Si3N4 ceramics prepared by using ZrH2 as an oxygen getter, Journal of Alloys and Compounds, 855 (2021) 157451. https://doi.org/10.1016/j.jallcom.2020.15745110.1016/j.jallcom.2020.157451 ↗
85. Wang Y., Jones S., Dai A., Liu G., Reliability enhancement by integrated liquid cooling in power IGBT modules for hybrid and electric vehicles, Microelectronics Reliability, 54 (2014a) 1911–1915. https://doi.org/10.1016/j.microrel.2014.07.03710.1016/j.microrel.2014.07.037 ↗
86. Wang Z.H., Bai B., Ning X.S., Effect of rare earth additives on properties of silicon nitride ceramics, Advances in Applied Ceramics, 113 (2014b) 173–177. https://doi.org/10.1179/1743676113y.000000013810.1179/1743676113Y.0000000138 ↗
87. Wasanapiaenpong T., Wada S., Imai M., Yano T., Lower temperature pressureless sintering of Si3N4 ceramics using SiO2-MgO-Y2O3 additives without packing powder, Journal of the Ceramic Society of Japan, 114 (2006) 733–738. https://doi.org/10.2109/jcersj.114.73310.2109/jcersj.114.733 ↗
88. Watari K., Evaluation of thermal conductivity of grains and fillers by using thermoreflectance technique—Si3N4, AlN, SiC, Journal of the Ceramic Society of Japan, 122 (2014) 967–970. https://doi.org/10.2109/jcersj2.122.96710.2109/jcersj2.122.967 ↗
89. Watari K., Hirao K., Brito M.E., Toriyama M., Kanzaki S., Hot isostatic pressing to increase thermal conductivity of Si3N4 ceramics, Journal of Materials Research, 14 (1999) 1538–1541. https://doi.org/10.1557/JMR.1999.020610.1557/JMR.1999.0206 ↗
90. Watari K., Seki Y., Ishizaki K., Temperature dependence of thermal coefficients for HIPed silicon nitride, Journal of the Ceramic Society of Japan, 97 (1989) 174–181. https://doi.org/10.2109/jcersj.97.17410.2109/jcersj.97.174 ↗
91. Yang H., Yang G., Yuan R., Pressureless sintering of silicon nitride with magnesia and ceria, Materials Research Bulletin, 33 (1998) 1467–1473. https://doi.org/10.1016/S0025-5408(98)00129-910.1016/S0025-5408(98)00129-9 ↗
92. Yokota H., Ibukiyama M., Effect of lattice impurities on the thermal conductivity of β Si3N4, Journal of the European Ceramic Society, 23 (2003) 55–60. https://doi.org/10.1016/S0955-2219(02)00074-210.1016/S0955-2219(02)00074-2 ↗
93. Yoshida K., Sekimoto Y., Katayama K., Wasanapiarnpong T., Imai M., Yano T., The Effect of heat-treatment on thermal conductivity of silicon nitride ceramics, Key Engineering Materials, 484 (2011) 52–56. https://doi.org/10.4028/www.scientific.net/KEM.484.5210.4028/www.scientific.net/KEM.484.52 ↗
94. Zhang J., Cui W., Li F., Du S., Tian Z., Sun S., Chen K., Liu G., Effects of MgSiN2 addition and post-annealing on mechanical and thermal properties of Si3N4 ceramics, Ceramics International, 46 (2020) 15719–15722. https://doi.org/10.1016/j.ceramint.2020.03.09710.1016/j.ceramint.2020.03.097 ↗
95. Zhang J., Ye F., Jiang D., Iwasa M., Preparation of bulk Si3N4 from tape casting and lamination, Ceramics International, 32 (2006) 277–282. https://doi.org/10.1016/j.ceramint.2005.03.00310.1016/j.ceramint.2005.03.003 ↗
96. Zhao J., Liu Y., Zheng Y., Li X., Sui T., Lin B., Fabrication of Si3N4 ceramics substrates with high thermal conductivity by tape casting and gas pressure sintering, International Journal of Applied Ceramic Technology, 21 (2024) 1493–1501. https://doi.org/10.1111/ijac.1469410.1111/ijac.14694 ↗
97. Zhou Y., Hyuga H., Kusano D., Yoshizawa Y.-i., Hirao K., A tough silicon nitride ceramic with high thermal conductivity, Advanced Materials, 23 (2011) 4563–4567. https://doi.org/10.1002/adma.20110246210.1002/adma.201102462 ↗
98. Zhou Y., Hyuga H., Kusano D., Yoshizawa Y., Ohji T., Hirao K., Development of high-thermal-conductivity silicon nitride ceramics, Journal of Asian Ceramic Societies, 3 (2015) 221–229. https://doi.org/10.1016/j.jascer.2015.03.00310.1016/j.jascer.2015.03.003 ↗
99. Zhou Y., Zhu X., Hirao K., Lences Z., Sintered reaction-bonded silicon nitride with high thermal conductivity and high strength, International Journal of Applied Ceramic Technology, 5 (2008) 119–126. https://doi.org/10.1111/j.1744-7402.2008.02187.x10.1111/j.1744-7402.2008.02187.x ↗
100. Zhu X., Sakka Y., Textured silicon nitride: processing and anisotropic properties, Science and Technology of Advanced Materials, 9 (2008) 033001. https://doi.org/10.1088/1468-6996/9/3/03300110.1088/1468-6996/9/3/033001 ↗